StarTech Com 14G PRIVACY SCREEN Laptop Privacy Screen Gold User Guide
- June 17, 2024
- StarTech com
Table of Contents
Quick-Start Guide
Installation Instructions for StarTech.com Privacy
Filters
Requirements
For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.startech.com/support
Install the Privacy Filter
Notes: For installations where less frequent removal is desired or if the
display is bezel-less, it is recommended to use the Adhesive Strips.
For installations that require frequent removal of the Privacy Filter or if
the display features raised bezels, it is recommended to use the Mounting
Tabs.
Remove all Protective Films from the Privacy Filter prior to installation.
If the Privacy Screen is reversible, choose the side that best fits the
application.
Not all installation methods are available for all Privacy Filters.
Method 1: Adhesive Strips
-
Clean the Screen using the Wiping Cloth.
-
Select the side of the Privacy Filter intended to Face Outward. Place the Privacy
Filter on a clean and flat surface with the selected side Facing Down. -
Remove all Adhesive Strips from the Transparent Lining. (Figure 1)
-
Carefully align the Adhesive Strips along the Top, Bottom, Left, and Right edges of the Privacy Filter. Apply Firm Pressure to affix them to the Privacy Filter. (Figure 2)
-
Carefully remove the Protective Backing from the Adhesive Strips. (Figure 3)
-
Attach the Privacy Filter to the Screen, starting from the Bottom and working towards the Top. The Adhesive Side should face toward the Screen. (Figure 4)
-
Apply Gentle Pressure on the Locations where the Adhesive Strips were installed.
-
Clean any fingerprints on the Privacy Filter using the Wiping Cloth.
Method 2: Mounting Tabs
-
Clean the Screen and Bezels using the Wiping Cloth.
-
Separate the Mounting Tabs. (Figure 5)
-
Remove the Protective Backing from the Mounting Tabs. (Figure 6)
-
Install One Short and One Long Mounting Tab on the Left Bezel.
-
Repeat Step 4 for the Right Bezel.
-
Install One Short Mounting Tab on the Bottom Bezel. (Figure 7)
Note: Depending on the display size, additional Mounting Tabs may need to
be installed on the side or bottom bezels. -
Slide the Privacy Filter between the Mounting Tabs and the Screen. (Figure 8)
-
Clean any fingerprints on the Privacy Filter using the Wiping Cloth.
Method 3: Flip-Up and Flip-Over
-
Clean the Screen and Bezels using the Wiping Cloth.
-
Carefully remove the Protective Backing from the Short-Side of the Adhesive Flip-Up Tabs or Flip-Over Tabs. (Figure 9)
-
Carefully align and evenly space the Adhesive Flip-Up Tabs or Flip-Over Tabs around the corners of the Top Edge of the Privacy Filter. Apply Firm Pressure to affix them to the Screen Side of the Privacy Filter. (Figure 10)
-
Carefully remove the Protective Backing from the Long-Side of the Adhesive Flip-Up or Flip-Over Tabs. (Figure 11)
-
a Flip-Up Installation: Center the Privacy Filter against the Screen, ensuring the active area of the Screen is covered and the Adhesive Flip-Up Tabs are aligned and straight along the Top Bezel. Apply Firm Pressure to affix them to the Top Bezel. (Figure 12)
5.b Flip-Over Installation: Center the Privacy Filter against the Display, ensuring the entire Display is covered. Fold the Adhesive Flip-Over Tabs over the Top Edge ensuring they are straight. Apply Firm Pressure to affix them to the Lid. (Figure 13)
Note: Ensure the Adhesive Flip-Over Tabs are perfectly aligned with each other so the Privacy Filter is not skewed and can seamlessly rotate when flipped.
-
(Optional) Carefully remove the Protective Backing from the Adhesive Lifting-Tab. Carefully align the Adhesive Lifting-Tab along the Bottom Left or Right Edge of the Privacy Filter. Apply Gentle Pressure to affix it to the Privacy Filter. (Figure 14)
-
(Optional) Use the Lifting Tab to Lift-Up or Flip the Privacy Filter over the Lid, depending on the installed Adhesive Tabs. (Figure 15)
Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of thirdparty companies not related in any way
to StarTech.com. Where they occur these references are
for illustrative purposes only and do not represent an endorsement of a
product or service by StarTech.com, or an endorsement of the product(s) to
which this manual applies by the third-party company in question.
StarTech.com hereby acknowledges that all trademarks,
registered trademarks, service marks, and other protected names and/or symbols
contained in this manual and related documents are the property of their
respective holders.
Warranty
Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP
(or their officers, directors, employees or agents) for any damages (whether
direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada| StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.| StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom| StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
---|---|---|---
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support