EDIFIER e25HD Bluetooth Wireless Optical TV Speakers User Manual
- June 17, 2024
- Edifier
Table of Contents
e25HD
Multimedia Speaker Manual
What’s in the box?
Note:
- Images are for illustrative purposes only and may differ from the actual product.
- For the need of technical improvement and system upgrade, information and specifications contained herein may be slightly different from actual product. If any difference is found, the actual product prevails.
Functional operation
- Side view of active speakerControl
| Play/pause (Bluetooth mode)
Mute/mute off (AUX/OPT mode)
---|---
| Disconnect Bluetooth
| Next track (Bluetooth mode)
| Previous track (Bluetooth mode) - Rear view of active speaker
- Rear view of passive speaker
Remote control
Battery replacement
- Slide the switch along the slot to the end and simultaneously rotate the battery compartment lid counterclockwise until the point indicator aligns with the “ ” icon.
- Remove the battery compartment and insert a new battery into the battery compartment with its positive electrode outwards.
- Put back the battery compartment lid and rotate it clockwise until the point indicator aligns with the “ ” icon.
Connection
Power input: 100-240V~ 50/60Hz
- This plug type is meant for illustration purpose only.
Operating instructions
- Bluetooth input
Press the “ ” button on the active speaker or the “ ” button on the remote control.Switch to Bluetooth mode.Select “EDIFIER e25HD” in your device setting to connect.The indicator light will blink blue rapidly and then remain solid blue if successful.
Note:
- Pin code for connection is “0000” if needed.
- To enjoy all Bluetooth functions of this product, make sure that your audio source device supports A2DP and AVRCP profiles.
- If no device is connected in 30 minutes, the speaker will switch to Bluetooth hidden mode. In this mode, (1) new devices cannot find the speaker, but (2) for a device that exists in the pairing record of this speaker, you can select “EDIFIER e25HD” from its Bluetooth device list to reconnect. To exit from Bluetooth hidden mode, press the “ ” button on the speaker or the “ ” button on the remote control.
- To disconnect from the current Bluetooth device, press and hold the “ ” button on the remote control for 1.5 seconds, or simultaneously tap and hold the buttons of “+”, “-“, and “ ” on the active speaker for 3 seconds.
AUX input
Connect the speakers to your audio device using the audio cable.Press the “ ” button on the active speaker or the “AUX”
button on the remote control. Switch to AUX mode. Play audio on the connected
device.
Note:
The speaker detects the plug-in or plug-out of an AUX audio cable.
- If an AUX audio cable is connected, the speaker will switch to AUX mode automatically.
- If the AUX audio cable is plugged out, the speaker will switch to Bluetooth mode automatically.
OPT input
Connect the speakers to your audio device using the fiber optic audio cable.Press the “ ” button on the active speaker or the “OPT” button on the remote control.Switch to OPT modePlay audio on the connected device
Note:
The speaker detects the plug-in or plug-out of a fiber optic audio cable.
- If a fiber optic audio cable is connected, the speaker will switch to OPT mode automatically.
- If the fiber optic audio cable is plugged out, the speaker will switch to Bluetooth mode automatically.
Specifications
Total output power: R/L(Treble): 15W+15W, R/L(Mid-Bass): 22W+22W
Frequency response: 50Hz-40kHz
Input: 20V ** 2.75A
Declaration for EU**
Frequency Band: 2.402GHz ~ 2.480GHz
RF Power output: ≤13 dBm (EIRP)
There is no restriction of use.
Troubleshooting
Cannot connect to your Bluetooth device
- Make sure that the distance between this product and your Bluetooth device is less than 10 meters and there are no obstacles between them.
- Make sure that no device is connected to this product via Bluetooth.
- Make sure that this product is in Bluetooth pairing mode. If not, manually switch it to this mode.
- Restart this product, enable Bluetooth function on your Bluetooth device, and then try again.
- Reset this product to factory settings and try again.
No power
- Make sure that the power cable is properly connected.
- Make sure that the power supply is not disconnected.
No sound
- Make sure that this product and your device is properly connected.
- Make sure that the correct audio input source is selected.
- Make sure that the playback is not paused.
- Make sure that this product and your device are not muted.
- Increase the volume of this product and your device.
Noise coming from speakers
- EDIFIER speakers generate little noise, while the background noise of some audio devices are too high. Please unplug audio cables and turn the volume up. If no sound can be heard at 1 meter away from the speaker, there is no problem with this product.
To learn more about EDIFIER, please visit
www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on
www.edifier.com and review the section titled
Warranty Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com
(English) or www.edifierla.com
(Spanish/Portuguese) for local contact information.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>