savio SHADOW X2 Computer Case User Manual
- June 17, 2024
- Savio
Table of Contents
savio SHADOW X2 Computer Case
Product Information
Specifications
- Supported fans: 7
- Watercooling support: rear
- Product dimensions: ATX Mid-Tower
- Case material: SPCC 0.6 mm
- Front panel material: Small holes metal mesh
- Net/gross weight: 5.1 / 6.2 kg
Front Panel
- A – LED switch
- B – USB 3.0
- C – USB 2.0
- D – Microphone jack
- E – Headphone jack
- F – Reset button
- G – HDD LED
- H – Power LED
- I – Power button
Mounting Accessories
| Parts symbol | Parts name | Quantity |
|---|---|---|
| A | HDD screws | 8 |
| B, C | PSU/GPU screws | 7 |
| D | Cable ties | 3 |
| E | PCIE slot ties | 4 |
Product Usage Instructions
Step 1: Side Panels Removing
- Remove 2 screws from the right side panel and open the left side panel with the knob.
- Remove the right side panel by moving it 2 cm backwards.
Step 2: PSU Installation
EN Place the power supply in the correct location, then secure it with screws. Pay attention, the PSU fan should be facing downwards.
Step 3: SSD/HDD Installation
EN Insert the SSD or HDD drives in the right places (as presented in the pictures) and secure them with screws.
Step 4: ATX/EPS Cable
Pass the ATX/EPS cable through the proper holes in the PC case.
Step 5: Motherboard Installation
EN Install the motherboard into the case and connect the necessary cables to the appropriate sockets on the motherboard.
Step 6: GPU Installation
- Uninstall the expansion card cover.
- If necessary, remove some PCI-E slot covers.
- Insert the GPU card into the PCI-E slot.
- Secure the GPU card with screws.
- Plug the PSU connector into the GPU socket.
- Install the expansion card cover.
FAQ
Where can I share my opinion about the product?
You can share your opinion about the product on the portal ceneo.pl, social media, or on the website of the store where you made the purchase. If you want to show the device on SAVIO Facebook Page, you can contact [email protected].
How can I provide feedback to improve the product?
If you have any suggestions or feedback to improve our products, please write to us at [email protected]. Your feedback is valuable to us in better adapting the product to your expectations..
LET’S PLAY 2GETHER
Thank you for choosing Savio product!
- If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, social media or on the website of the store where you made the purchase. If you want to show our device on SAVIO Facebook Page, we will be very pleased.
- If there is something that we could improve on our products, please write to us at [email protected]
- Thanks to your feedback, we will be able to better adapt the product to your expectations.
MOUNTING ACCESSORIES
SPECIFICATION
FRONT PANEL
ASSEMBLY OF COMPONENTS
-
STEP 1
SIDE PANELS REMOVING- Remove 2 screws from the right side panel and open the left side panel with the knob.
- Remove the right side panel by moving it 2 cm backwards.
-
STEP 2
PSU INSTALLATION
Place the power supply in correct location, then secure it by screws. Pay attention the PSU fan should be facing towards down.
-
STEP 3
SSD/HDD DRIVES INSTALLATION
Insert the SSD or HDD drives in right places (presented on the pictures) and secure them by screws. -
STEP 4
ATX/EPS CABLE
Pass the ATX/EPS cable through proper holes in PC case. -
STEP 5
MOTHERBOARD INSTALLATION
In case of having ATX motherboard you need to assembly additional M / B standoffs in proper places in PC case.- Place the I/O shield in the PC case.
- Place the motherboard in the standoff.
- Secure the motherboard it by screw.
- Plug the EPS and ATX cables into the proper sockets on the motherboard.
-
STEP 6
GPU INSTALLATION- Uninstall the expansion card cover.
- If necessary, remove some PCI-E slot covers.
- Insert GPU card into PCI-E slot.
- Secure the GPU card by screws.
- Plug the PSU connector into the GPU socket.
- Install the expansion card cover.
-
STEP 7
I/O PANEL INSTALLATION
Top I/O panel is equipped with USB ports, audio and microphone. For its proper operation, it is required to connect the wires coming from it to the appropriate connectors on the motherboard.
ADDITIONAL INFORMATION
- The screws for additional fans are not included in the mounting set.
- The VGA holder is not included in the mounting set.
- Do not cover vent holes which are located at the top, rear, front and bottom of PC case.
SAFETY CONDITIONS
- Use the product in accordance with its intended use, as improper use may damage the product.
- Do not expose the device to moisture, heat or sunlight, do not use the product in a dusty environment.
- The device should be cleaned only with a dry cloth.
- Independent repairs and modification result automatic loss of the warranty.
- Hitting or dropping may damage the product.
Warranty:
The warranty covers a period of 24 months. Independent repairs and
modifications result in automatic loss of the warranty. Warranty card is
available for download on our website:
www.savio.net.pl/en/service
Information of the utilization of electrical and electronic equipment
This symbol indicates that electrical appliances should not be discarded with
other household waste. Used equipment should be handed over to a local
collection point for this type of waste or to a recycling center. Please
contact your local authorities for information about disposal methods
available in your area. Waste electrical equipment may contain hazardous
substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get
into air, soil and groundwater when leaking from used appliances.
Environmental pollution with these substances leads to their bioaccumulation,
causing lesion of disease in living organisms, which would pose a risk to
human and animal health or life. Households may contribute to environmental
protecion by proper waste collection. In such way, hazardous substances from
the equipment are neutralized and valuable secondary raw materials are reused
for production of new equipment.
Producer:
Elmak Sp. z o.o.
ul. Morgowa 81
35-323 Rzeszow, Poland
www.savio.net.pl
www.saviogaming.com