cecotec ReadyWarm 2070 Max Force Black Fan Heater Instruction Manual

: June 17, 2024
: cecotec

Table of Contents

SAFETY INSTRUCTIONS
PARTS AND COMPONENTS
BEFORE USE
OPERATION
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
TECHNICAL SUPPORT AND WARRANTY
COPYRIGHT
CUSTOMERS SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

cecotec ReadyWarm 2070 Max Force Black Fan Heater

This product is not suitable for primary heating purposes. This product is only suitable for well insulated spaces or occasional use.

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the device.
Keep this instruction manual for future reference or new users.

Ensure that the mains voltage matches the voltage specified on the device rating label and that the plug is earthed.
This device is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
Check the power cable regularly for visible damage. If the cable is damaged, it must be replaced by the official Cecotec
Technical Support Service to avoid any danger.
This symbol means “Do not cover”.
WARNING: to avoid overheating, do not cover the appliance.
Do not use for heating clothes.
Unplug the cord from the power supply after switching off the appliance. Do not pull the cord.
Do not let the cord touch the heater while in operation.
Do not place the appliance close to heat sources, flammable substances, or wet surfaces where it could fall or be thrown into water, nor allow it to come into contact with water or other liquids. Do not use outdoors.
Always use the device on a horizontal and stable surface.
The appliance must not be placed immediately below a socket.
The product’s surface will reach high temperatures during operation. Avoid contact between the skin and the device.
Do not use the heating appliance in the immediate vicinity of a bath, shower, or swimming pool.
Do not use this appliance if it has been dropped or shows visible signs of damage.
WARNING: do not use the appliance in small rooms if persons in said room are incapable of leaving by themselves, unless continuously supervised.
WARNING: to avoid fire, keep fabrics, curtains, and any flammable material at least 1 metre away from the air outlet.
The heater must be installed in such a way that the mains socket is accessible.
This heater cannot be installed as a built-in heater. Always respect safety distances.
Before cold seasons and after the appliance has remained switched off for several days or months, clean it thoroughly before switching it back on.
This appliance is not intended to be operated by means of an external timer or separate remote-control system.
Temperature changes can cause the heater to make noises.
This is normal and does not indicate any malfunction.
Keep the packaging materials out of the reach of children, as they could be dangerous.
No liability is accepted for any eventual damage or personal injuries derived from misuse or non-compliance with this instruction manual.
Keep the device out of the reach of children under 3 years old, unless constantly supervised.
Children between 3 and 8 years old should only switch the appliance on or off when it has been placed in its normal, intended operating position and if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children between 3 and 8 years old should not plug in, adjust, and clean the appliance and should not carry out maintenance tasks.
CAUTION: some of the product’s parts may become very hot and cause burns. Particular attention should be paid when children and/or vulnerable people are present.
This appliance can be used by children aged 8 and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, as long as they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by unsupervised children.
Supervise children to prevent them from playing with the appliance. Close supervision is necessary if the appliance is used by or near children.

PARTS AND COMPONENTS

Fig. 1

Piezas Y Componentes

Power regulator
Temperature knob

NOTE:
The graphics in this manual are schematic representations and may not exactly match the device.

BEFORE USE

This device is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

OPERATION

Before inserting the plug into an outlet, make sure that the power supply in your area matches the rating label on the appliance.
Carefully remove the heater from the plastic bag and the cardboard box.
The heater must be placed on a firm and levelled surface.
Your heater is equipped with a 4-position rotary switch.
- Remove all packaging materials and place the device in the desired location.
- Make sure that the appliance is in a safe place, between furniture and curtains, with a safety distance of 50 cm to the sides and 120 cm to the front.
- Unwind the power cord and connect the plug to a properly installed outlet.
- Power regulator
- Switch off: turn the heat selection switch to the “O” position, the heater will stop operating and the indicator light will go out.
- Fan mode: select the first position.
- Heating at reduced power: turn the selector (right) to the second position “I”, for operation at 1000W.
- Full power heating: turn the selector (right) to the third position “II”, for operation at 2000W.
- Temperature knob
- Turn the temperature knob clockwise to increase temperature, and anticlockwise to decrease it.
Before switching off, it is best to leave the heater for 5-10 seconds in the cold air function.

CLEANING AND MAINTENANCE

Before performing any cleaning or maintenance operations on the appliance, disconnect it from the mains.
A soft, damp cloth and neutral detergent are recommended for cleaning. Do not use abrasive cloths or devices that may affect the appearance of the appliance. Check that the hot air outlet and ventilation inlet are free of dust and dirt.
During cleaning, be careful not to touch the heating elements.
Clean the filter located in the rear part of the device. To open the filter on the back for cleaning, press the top of plastic net at back.
In the event of a fault and/or malfunction of the appliance, disconnect it from the mains and contact an authorized repairer.

TECHNICAL SPECIFICATIONS

Product reference: 08254
Product: Ready Warn 2070 Max Force Black
Power: 1800 – 2000W
Voltage: 220-240 V~
Frequency: 50/60 Hz

08254 ReadyWarm 2070 Max Force Black

Item| Symbol| Value| Unit| Item| Unit
Heating power| Type of heat input, for electric storage local space heaters only (single select)
Nominal heat output| Pnom| 1.8 – 2.0| kW| Manual heat charge control with integrated thermostat| [no]
Minimum heat output (indicative)| Pmin| 1.0| kW| Manual heat charge control with room and/or outdoor temperature feedback| [no]
Maximum continuous heat output| Pmax| 2.0| kW| Electronic heat charge control with room and/or outdoor temperature feedback| [no]
Auxiliary electricity consumption| Fan assisted heat output| [no]
---|---|---
At nominal heat output| elmax| 0,000| kW| Type of heat output/room temperature control (single select)
At minimum heat output| elmin| 0,000| kW| Single stage heat output and no room temperature control| [no]
In standby mode| elSB| 0,000| kW| Two or more manual stages, no room temperature control| [no]
| With mechanic thermostat room temperature control| [yes]
| | | | With electronic room temperature control| [no]
| | | | Electronic room temperature control plus day timer| [no]
| | | | Electronic room temperature control plus week timer| [no]
| Other control options (multiple selections possible)
| | | | Room temperature control, with presence detection| [no]
| | | | Room temperature control, with open window detection| [no]
| | | | With distance control option| [no]
| | | | With adaptive start control| [no]
| | | | With working time limitation| [no]
| | | | With black bulb sensor| [no]
Contact details:| Cecotec Innovaciones S.L
Av. Reyes Católicos nº60 – 46910, Alfafar (Valencia, Spain)

Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.

TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.

COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.