AGM X1 Rugged Android Smartphone Owner’s Manual
- June 17, 2024
- AGM
Table of Contents
AGM X1 Rugged Android Smartphone
ABOUT PHONE
USB Cover Pressing Steps:
Press point “1”&”2″ first, and then press point “3
Functions
- POWER: Press the POWER key long to power on/off the phone. Press short to lock/unlock the display during use.
- VOLUME: Press to increase/decrease the phone volume. Press to mute the phone during call incoming.
- BACK: Press to return to the last page.
- FINGERPRINT: Press long to activate the fingerprint function. Press short to quickly back to the HOME page.
- MENU: Press to check recent menu lists.
Tips :
- In case the system halted, long press POWER for 10 seconds to power off the phone, then long press the POWER to power on.
- Do not cover RECEIVER OR MIC during calling.
- 3.5MM EARPHONE JACK supports only CTIA earphones.
WATERPROOF WARNING
AGM X1 is waterproof:
- Make sure the USB/EARPHONE cover and SIM SOCKETS cover are closed tightly before touching any water.
- After touching the water, dry the phone with soft paper or cloth.
- Naturally, dry the water in MIC/RECEIVER/SPEAKER for 30 minutes.
Warning: Hair dryers or any other strong dry methods are forbidden.
PREPARE TO INSTALL
Install Micro U(S)IM/Nano-U(S)IM
And Micro SD card:
- Open the SIM SOCKETS cover.
- Pull out the SIM SOCKETS.
- Put Micro-U(S)IM in position 1.
- Put Nano-U(S)IM or Micro SD card in position 2.
- Make sure Micro-U(S)IM/Nano-U(S)IM/Micro SD card metal contact parts are downward, and the cut corner is aligned with the sockets in the right position.
SIM Tips :
- The phone is not valid for 2 CDMA SIM cards used at the same time.
- Nano-U(S)IM/Micro SD card socket can only be for either Nano-U(S)IM or Micro SD card. Put Nano-U(S)IM vertically or Put Micro SD card horizontally.
- SIM card adapter, cutting SIM card or any other non-standard cards are not allowed.
- Do not replace or install Micro-U(S)IM/Nano-U(S)IM when the phone is running.
Micro SD Tips
- Do not remove the Micro SD card when using the phone, or it will destroy the Micro-SD card. AGM is not responsible for any data loss or card damage..
- Power off the phone before installing or removing the Micro SD card.
- AGM does not provide a Micro SD card, users need to buy it themselves.
ABOUT BATTERY
NOTE : The battery is not replaceable
BATTERY USAGE
- Standby time depends on different environments. System running, phone settings, playing games, playing music/video, camera, and data service will influence standby time.
- Phone calls and games etc. will consume more battery volume. Standby time will be short.
- Phones under no signal or weak signal environment will shorten the standby time. Temperature will also influence standby time.
CHARGE THE BATTERY
- Open the Micro USB/Earphone port cover. Plug the USB cable into the phone in the correct direction.
- Connect the USB cable to the charger and plug in a 100 ~ 240V 50/60Hz power supply.
- When the NOTIFICATION light turns green, continue charging for 15 minutes.
- An original charger or other certified charger is preferred.
CHARGING TIME
- Charging time depends on the output current of the charger and phone running status.
- AGM X1 original charger supports quick charging. 80% volume will be charged in the first 1 hour, and a full charge in the next 3 hours.
- A normal 5V/1A output charger will take around 6 hours to fully charge the phone.
- Playing phone during changing will extend the charge time.
Tips :
- Full charge the battery during 1st use. Cut off the power when the battery is fully charged. Long-time charging may damage the battery.
- Disconnect the charger from the power supply when not in use.
- In case the battery is empty, please charge the phone at least 15 minutes before power on the phone.
- The phone’s working temperature is from 0°C-40°C. Charging the phone over this temperature range will damage the battery and shorten battery life.
- For safety issues, please use AGM’s original charger and cable.
- The battery has self-discharge even phone is not used. Please charge the phone every 2 months if not used.
FREQUENT USE FUNCTIONS LOCK/UNLOCK THE SCREEN :
- Press POWER key
- The phone screen will be locked when the phone is not used for sleep time setting by user.
UNLOCK THE PHONE :
Press the POWER key to unlock the screen and slip the screen up to unlock the
phone.
SCREENSHOT :
Long press the POWER key and VOLUME DOWN key at the same time.
FUNCTIONS SHORTCUT MENU
- Pull down from the status bar and open the notification panel.
- Slip left and enter the shortcut menu. Long press the shortcut icon to enter the functions.
AGM X1 SUPPORT DUAL MAIN CAMERA FUNCTION
Open the camera application, choose a DUAL function, and select “A” circle.
- Auto mode: Autofocus on photos
- Focus model: Focus can be re-defined after taking photos
- Halo mode: Add halation to foreground or background
- Sketch mode: Add Sketch Effect to foreground or background
- Fusion mode: Automatic cutout foreground or background, choose other pictures, and fuse new photos.
The quick camera can be activated by doubling click VOLUME DOWN button under the screen screen-locked model.
WARNING: Please install only officially released applications for AGM X1.
AGM is not responsible for any professional applications based on AGM X1.
FAQ
Frequently Asked Questions
- Q: How do I clean the product?
- A: To clean the product, use a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the product.
- Q: Can I use the product outdoors?
- A: This product is designed for indoor use only. Using it outdoors may expose it to environmental factors that could affect its performance and durability.
- Q: What should I do if the product stops working?
- A: First, check if the product is properly connected to the power source. If the issue persists, consult the troubleshooting section of the user manual or contact our customer support for assistance.
Compliance
This device complies with the essential requirements and other provisions
contained in Directive 1999/5/EC.
Visit for more: www.agmdevice.com
References
Read User Manual Online (PDF format)
Loading......