AGM MOBILE PAD P2 4G LTE Tablet User Guide
- June 1, 2024
- AGM MOBILE
Table of Contents
AGM MOBILE PAD P2 4G LTE Tablet
USER GUIDE
AGM_PAD_P2, AGM_PAD_P2W
NOTICE
Features of the product and its accessories described herein rely on the software, phone internal memory and local networks, and may not be activated or may be limited by local network operators or service providers. Therefore, the descriptions herein may not exactly match the purchased product or its accessories. The manufacturer reserves the rights to change or modify any information or specifications contained in this manual without prior notice or obligation. The manufacturer is not responsible for the legitimacy or quality of any products that you may upload or download through this device including but not limited to text, images, music, movies, and non-integral software. Any consequences arising from the usage of the preceding products on this device is the responsibility of the user.
DESCRIPTION DES FONCTIONS AGM_PAD_P2
1 >Volume Key
Press to increase/decrease the phone volume.
Press to mute the phone during an incoming call.
2 >Noise-canceling Microphone
Used to reduce background noise.
Do not touch with hard pin.
3 >Front Camera(8MP)
Takes front facing photos
4 >Power Key
Long press power key to power pad on/off.
Short press power key to lock/unlock the screen.
5 >LOUDSPEAKER
6 >Display
10.95 nches FHD
7 >Main Microphone
For talking and voice recording.
Do not touch with hard pin.
8 >Sensors
Ambient light sensor.
9 >3.5mm Headphone Jack
10 >SIM/SD Tray
Supports Nano SIM and Micro SD card.
11 >USB Type-C port
12 >LED
LED flash light.
13 >Main Camera(50MP)
Takes photos and videos.
GETTING STARTED
Installing the SIM and Micro SD card:
1. use metal ejector pin provided to open the SIM tray.
2. Pull out the SIM tray.
3. Place Nano-SIM in inside position.
4. Place Nano-SIM or Micro SD card in outside position.
5. Make sure that the Nano-SIM and Micro SD card the cut corner aligned with
tray in the correct position as per the diagram shown above.
NOTE:
1. * For some versions, AGM_PAD_P2 does not support 2 SIM cards data services
working together. When inserting 2 SIM cards, you can only choose one of the 2
SIM cards to use 4G services.The AGM_PAD_P2 supports dual SIM dual standby but
single pass. This means that you cannot use both SIM cards for calls or data
services simultaneously.
2. Nano-SIM and Micro SD card socket can only be used for either Nano-SIM or
Micro SD card. Place the Nano-SIM vertically or place Micro SD card
horizontally.
3. SIM card adapter. A cut SIM card or any other non-standard cards are not
allowed. Those non-standard cards may not be recognized by the phone and can
damage the tray.
- 5G WIFI is for indoor use only.
- Following functions are disabled in AGM_PAD_P2 WIFI:Nano-SIM.
BATTERY AND CHARGING
Note: The AGM_PAD_P2 battery is not removable
Standby time:
1. The AGM_PAD_P2 standby time is dependent on different working
environments.
2. AGM_PAD_P2 receiving a weak network signal and operating at low
temperature will have a shortened standby time.Screen brightness, system
settings, games, music, video, location services, camera, Bluetooth, Wi-Fi and
applications consume the most battery power.
Charging the PAD:
1. Connect the USB power cable to the port. Be careful not to use excessive
force when plugging the cable. Any damage caused by attempting to insert the
connector incorrectly is not covered by the warranty.
2. Connect the USB power cable to the charging power adapter.
*AGM_PAD_P2 supports CE/CB/FCC/EAC or equivalent certified chargers.
The recommended charger output is PD 20.0 W.Uncertified equipment may cause damage to the device or cause batteries to explode.
3. Plug the charger into an AC mains socket.
4. When charging is complete, remove the cable from the device.
Tips:
1. The optimum working temperature for the AGM_PAD_P2 is from 0℃~40℃.Charging the PAD outside this temperature range will damage the battery and shorten battery life.
- Please do not charge the PAD under extremely low or high temperature, Please charge the phone under 5℃~40℃. Otherwise the battery will be damaged or exploded.
2. Please use the certified charger and cable to ensure maximum performance
and safety.
3. Please note that the battery will still discharge itself even when the PAD
is not in use and switched off. If you plan to not use the unit for an
extended period, you should still charge it a least every two months to
prevent complete power loss and to protect your data.
Quick Start Guide
Powering On the Device:
Press and hold the power button for 5 seconds, release the button after the
device vibrates.
Your device will start, and you’ll see the brand’s startup screen. Unlocking
the Device:
By default, press the power button to unlock the screen, and swipe up to
unlock the device.
Users can also set different screen unlock methods according to their
preferences, such as slide, pattern, PIN code, fingerprint, password, etc.
Taking Screenshots:
Simultaneously press the power button and the volume down button.
Quick Access Menu:
Pull down from the status bar to open the notification panel. Users can select
shortcut icons based on their needs to activate/deactivate quick functions.
Here, you can find quick functions like internet, Bluetooth, flashlight, alarm, airplane mode, power-saving mode, etc.
Desktop Settings:
Long press on an empty space on the screen, choose wallpaper and style,
widgets, and home screen settings. Users can customize the device desktop
according to their preferences. For example, dragging the “Clock” widget to an
empty space on the desktop will display and allow its use.
Display Settings:
Go to Settings > Display > Enter various menus to complete settings according
to your needs.
Here, you can find functions like brightness, screen lock, display size, and
font.
Sound and Vibration Settings:
Go to Settings > Sound and Vibration > Enter various menus to complete
settings according to your needs.
Here, you can find settings for alarm volume, do not disturb mode, device
ringtone, etc.
Other Settings:
Go to Settings > System > Enter various menus to complete settings according
to your needs.
Here, you can find functions like language and input, navigation bar, system
updates, date and time, etc.
*To change the system language and switch input methods, you need to enter the “Language and Input” menu.
Specifications:
- Product Name: AGM_PAD_P2, AGM_PAD_P2W | Smart PAD
- Power Source: Type-C
- Wireless Connectivity: 5G WIFI (indoor use only)
WARNING
DISPOSAL AND RECYCLING INFORMATION
This symbol on the device (and any included batteries) indicates that they should not be disposed of as normal household garbage. Do not dispose of the device or batteries as unsortedmunicipal waste. The device (and any batteries) should be handed over to a certified collection point for recycling orproper disposal at the end of their life.
COMPLIANACE
This device complies with the essential requirements and other provisions contained in Directive 2014/53/EU.
Basic information of manufacturer
SHENZHEN AIJIEMO SCIENCE AND TECHNOLOGY CO.,LTD Copyright AGM Mobile Limited
2024. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY, AND DOES NOT CONSTITUTE ANY
KIND OF WARRANTY.
Frequently Asked Questions (FAQ):
Q: What should I do if my device does not power on after pressing the
power button?
A: If your device does not power on after pressing the power button, make sure it is charged. Try charging it using a Type-C cable.
Q: Can I use a regular SIM card in this device?
A: No, this device requires a Nano-SIM card for proper functioning.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>