aigostar 300100JDH Personal Blender with Freezer Tube Instruction Manual

aigostar 300100JDH Personal Blender with Freezer Tube Instruction Manual

IMPORTANT SAFETY GUIDELINES

To avoid the risk of serious injury when using your blender, basic safety precautions should be followed, including the following.

1. Misuse may cause injury. Please handle the appliance with care.

2.  Always switch off the appliance and disconnect it from the mains supply if it is left unattended and before assembling, disassembling or cleaning.

3.  Children must not use or play with this appliance. Keep the appliance and its cord out of children” s reach.

4.  The appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are under supervision or have been instructed on how to use it safely and understand the hazards involved.

5.  Be careful when handing the sharp cutting blades, emptying the bowl and cleaning the appliance.

6. Be careful if hot liquid is poured into the blender as there may be a sudden burst ofsteam.

7. This appliance is intended to be used for household and similar applications, such as:  staff k other working environments;  farm houses;
   – by clients in hotels, motels and other residential-type environments;
   – bed and breakfast-type environments.

8.  If the sucrgly cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

9. . This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into contact with food.

10.  Failure to follow any of the important safeguards and/or instructions for safe use is a misuse of your personal blender that can void your warranty and create the risk of serious injury.

SPECIFICATIONS

PARTS DIAGRAM

OPERATIONS

1. Put your favourite ingredients and cold water into the blender, making sure not togo over the 600ml marking.

2. Attach the blade assembly to the top of the bottle.

3. Turn the bottle upside-down, align the “A “ arrow on the blade assembly with the“ & ” unlock symbol on the base, press the bottle into the base and simply turn it clockwise to align with the “ 8 ” lock symbol on the base.

4. Place the blender base on a flat surface and plug in. Press and hold the switch andthe blender will start to work; release the switch to stop.

5. When the ingredients are fully blended, stop the blender and turn the bottle anticlockwise, then remove the bottle from the base.

6. Replace the lid on the blade assembly.

How to use the freezer tube

1. Remove the lid and fill the freezer tube with water. Do not exceed the ‘Max’ indicator.
2. Freeze the tube for 6~8 hours.
3. .Screw the freezer tube onto the lid clockwise.
4. .After use, remove it from the lid by turning anticlockwise, and clean

Warning

1. Rotating blades can cause severe injury.
2. Do not put hands, spatulas, etc. into the container while the machine is inoperation or the container is still attached to the base.
3. The lid is not interchangeable between containers of different styles, types and sizes.
4. Do not let the machine run for more than 3 minutes. After shutdown, the appliance must fully cool down to room temperature.

BLENDING RECIPES

Note: This blending chart should be used as a guide only.

TROUBLE SHOOTING

1.  If problems such as abnormal noises, smell, smoke, etc appear, immediately switchoff the appliance and disconnect it from the mains supply.
2. . If the product is not working, please check that it is connected to the power supply,the switch is in the ON position and the fittings are properly installed.
3. . If the product is still not working after you have carried out these checks, please consult the designated repair centre for maintenance.

CLEANING AND MAINTENANCE

1. Unplug the appliance from the power source before cleaning.
2. Remove all parts except the main engine before cleaning in water. Please be carefulwhen cleaning the blade to avoid injury.
   Note« The blade can be disassembled for cleaning.« Clean the motor base with a slightly damp cloth andwipe dry. Do not immerse the motor base in wateror any other liquid, or clean in a dishwasher. . GBI « After all the parts are dried, assemble the blender as :”‘:::::;’ before. 7« If you have any problems using the product, please do not disassemble without
   permission of the host. You should immediately contact the nearest authorised service provider or customer service maintenance point for help.

DISPOSAL

You can help protect the environment! Please remember to respect local regulations: Take non-working electrical equipment to an appropriate waste disposal centre.

Read More About This Manual & Download PDF:

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>