aigostar 300100RKN Archer Blender Josser Instruction Manual

: June 17, 2024
: aigostar

Table of Contents

IMPORTANT SAFETY GUIDELINES
Specification
PARTS DIAGRAM
BEFORE FIRST USE
OPERATION
TIPS FOR BLENDING
CLEANING AND MAINTENANCE
DISPOSAL
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

aigostar 300100RKN Archer Blender Josser

IMPORTANT SAFETY GUIDELINES

When using electrical appliances, basic safety precautions should always be followed, including the following:

Read all instructions before operating.
To protect against electric shock, do not immerse tine cord, the plug or the appliance itself in water or any other liquid.
Unplug the appliance from the wall socket when not in use and before cleaning. Allow the appliance to cool before putting on or taking off parts.
Do not operate the appliance with a damaged cord or plug or after it has malfunctioned or has open damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment.
The use of accessory attachments Notre commended by the appliance manufacturer may cause injuries.
Do not use this appliance outdoors.
Do not let the cord hang over the edge of a table or counter and ao not let it touch hot surfaces.
Do not place this appliance on or near a hot gas or electric burner or in a heated oven.
To disconnect the appliance, turn the control to the OFF position, then remove the plug from the wall socket. Always grasp the plug and never pull the cord.
Oversized foods or metal utensils must not be inserted into the appliance as they may cause a fire or a risk of electric shock.
A fire may occur if the appliance is covered or is touching flammable material, including curtains, draperies, walls and the like, when in operation.
Do not clean the appliance using metal scouring pads. Pieces can break off the pad and touch the electrical parts of the appliance, causing a risk of electric shock.
Do not store any materials other than the manufacturer’ s recommended accessories in this unit when not in use.
Don’t Piscean of the following materials inside the unit: Paper, cardboard, plastic, and the like.
Do not operate the appliance for more than 2 minutes. After 2 minutes, the appliance needs to cool down for about 30 minutes.
lf the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a nasard.
Switch off the appliance and disconnect it from the mains supply before changing accessories and before approaching parts that move when in use.
This appliance must not be used by children. Keep the appliance and its cord out of reach of children.
This appliance can be used by persons with reduced physical, sensory or mental capabilities or who lack experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards in valve.
Children must not play with the appliance.
Always disconnect the appliance from the mains supply if it is left unattended and before assembling, disassembling or cleaning.
WARNING: There is a risk of injury if you don’ t use this appliance correctly. Care must be taken when handling the sharp cutting blades, when emptying the jug, and during cleaning.
CAUTION: Ensure that the appliance is switched off before removing it from the stand.

Specification

Model No.	300100RKN
Power consumption	220-240V ~ 50/60Hz
Power	1200 W
Capacity	1800 ml
Short operation time	Max. 2 min

PARTS DIAGRAM

BEFORE FIRST USE

All parts of the blender must be thoroughly cleaned before being used for the first time. Remove the required length of cable from the cable storage compartment in the base of the blender and connect the device to the mains supply.

OPERATION

Make sure that the blender is switched off (control knob is on the “O” setting) before use.
Place the food you wish to process into the jug. Do not use the blender without any material inside.
Place the jug assembly onto the motor base and turn clockwise until it locks securely. This blender has a safety design, meaning it will not work if the jug is not properly installed on the base. (Fig.1 )
Place the lid on the jug and press to secure. Place the measuring cap into the hole in the lid and turn clockwise to lock.
Switch on the motor base:
- 1: Low speed for light usage with liquids
- 2: High speed for more solid consistency – for mixing liquids and solid foods
- 0: OFF
- P: For ice crushing, short and powerful impulse movements, and cleaning.
  (The switch does not permanently engage in the “P” setting. You must hold the switch in the “P” setting or turn it repeatedly to the “P” setting)
When the juicing process is finish, turn the speed switch to “O” position and unplug the power. Clean the appliance in time according to CLEANING AND MAINTENANCE.

TIPS FOR BLENDING

To achieve the best results when blending solid ingredients, cut them into small pieces (2 to 3 cm) first, and place small portions into the glass jug one by one instead of a large quantity all at once.
When mixing solid ingredients, start with a small amount of liquid. Gradually add more and more liquid through the opening in the lid.
For stirring solid or very thick liquid ingredients, we recommend that you use the blender in the impulse ( “P” ) mode to prevent the blades from getting stuck.

CLEANING AND MAINTENANCE

WARNING: NEVER IMMERSE THE MOTOR BASE IN WATER.

Do not use abrasive detergents, scrub pads, acetone, alcohol, etc.
After each use, empty the glass jug and fill it with water. Place the glass jug on the motor base and turn the switch several times to the “P” setting. Empty the glass jug and rinse until clean.
The blade assembly can be unscrewed from the glass jug. Be extremely careful when removing the blades.
Clean the surface of the motor base with a cloth and sponge dampened with warm, soapy water. Rinse with a dampened cloth or sponge and wipe dry.

DISPOSAL

You can help protect the environment! Please remember to respect local regulations: Take non-working electrical equipment to an appropriate waste disposal centre.