ANGLER LCSB-88 Collapsible LED Softbox Instructions
- June 17, 2024
- angler
Table of Contents
ANGLER LCSB-88 Collapsible LED Softbox
Product Information
Specifications
- Model: LCSB-88, LCSB-1206, LCSB-1212
- Weight: 12.8 oz. (363 g), 12.9 oz. (366 g), 13.3 oz. (377 g) respectively
- Material: Diffuser: Polyester, Side and rear panels: Polyester, Inner panels: Silver-coated polyester
Product Usage Instructions
Assembling the Softbox
-
Attach the softbox before you mount your LED onto a light stand.
-
Unfold the softbox, and extend and lock the side support rods.
- Rest the LED light on the back opening. Do not place the LED inside the softbox.
- Close the side flaps around the LED. Then close the top and bottom flaps, and secure them with the touch-connect tabs.
- Stretch the elastic straps across the back of the LED, and attach them to the touch-connect strips on the opposite side.
Disassembling and Storing the Softbox
-
With the softbox lying flat, grip both sides and twist them in opposite directions to form a figure eight.
-
Continue to twist while tucking the corners into the center of the softbox. The softbox will collapse into a small, round shape that fits into the carry pouch.
Recommended Accessory
Angler LED Collapsible Softbox Grid (LCSB-GRID)
To narrow the beam spread and control light spill, attach the accessory grid
(available separately) to the recessed touch-connect strips on the front of
the softbox.
Assembling the Softbox
Attach the softbox before you mount your LED onto a light stand.
- Unfold the softbox, and extend and lock the side support rods.
- Rest the LED light on the back opening. Do not place the LED inside the softbox.
- Close the side flaps around the LED. Then close the top and bottom flaps, and secure them with the touch-connect tabs.
- Stretch the elastic straps across the back of the LED, and attach them to the touch-connect strips on the opposite side.
Disassembling and Storing the Softbox
- With the softbox lying flat, grip both sides and twist them in opposite directions to form a figure eight.
- Continue to twist while tucking the corners into the center of the softbox. The softbox will collapse into a small, round shape that fits into the carry pouch.
Recommended Accessory
Angler LED Collapsible Softbox Grid (LCSB-GRID)
To narrow the beam spread and control light spill, attach the accessory grid
(available separately) to the recessed touch-connect strips on the front of
the softbox.
| SPECIFICATIONS | LCSB- 88 | LCSB-1206 | LCSB- 1212 | |
|---|---|---|---|---|
| Dimensions (W × H × D) | 15.9 × 16.3 × 7.25 in. |
(40.4 × 41.5 × 18.4 cm)
| 15.9 × 16.3 × 7.25 in.
(40.4 × 41.5 × 18.4 cm)
| 15.9 × 16.3 × 7.25 in.
(40.4 × 41.5 × 18.4 cm)
LED Opening (W × H)| 8 × 8 in.
(20.3 × 20.3 cm)
| 10.5 × 5.2 in.
(26.7 × 13.1 cm)
| 11.5 × 11.5 in.
(29.2 × 29.2 cm)
Weight| 12.8 oz. (363 g)| 12.9 oz. (366 g)|
13.3 oz. (377 g)
Material| Diffuser: Polyester
Side and rear panels: Polyester
Inner panels: Silver-coated polyester
Warranty
One-Year Limited Warranty
This Angler product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for one (1)
year from the original purchase date or thirty (30) days after replacement,
whichever occurs later. The warranty provider’s responsibility concerning this
limited warranty shall be limited solely to repair or replacement, at the
provider’s discretion, of any product that fails during normal use of this
product in its intended manner and in its intended environment. Inoperability
of the product or part(s) shall be determined by the warranty provider. If the
product has been discontinued, the warranty provider reserves the right to
replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Angler Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Angler along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit
www.anglerlights.com or call Customer Service
at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Angler is a registered trademark of the Gradus Group.
© 2021 Gradus Group LLC. All Rights Reserved.
References
- Manual-Hub.com - Free PDF manuals!
- Angler | Lighting Equipment & Accessories
- Gradus | Gradus Group
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>