NASA WS100 Weather Station User Manual

June 9, 2024
NASA

REF: WS100 Weather Station
User ManualNASA WS100 Weather Station

WS100 Weather Station

Manual do usurious dispossession em:

https://gtcompany.fr/customer-support/#nasa

PLEASE READ ALL THE DIRECTIONS IN THIS MANUAL CAREFULLY AND FOLLOW THE OPERATING AND SAFETY INSTRUCTIONS. KEEP THIS MANUAL FOR FUTURE REFERENCE AND SHOW IT TO POTENTIAL USERS.

SAFETY INSTRUCTIONS

  • Keep children away from packaging materials (plastic bags, rubber bands, etc.)
  • This unit may be used by children aged 8 years and over and by anyone with reduced physical, sensory or mental capabilities or a lack of experience and knowledge, provided that they have been given supervision or instructions about how to use the unit safely and that they understand the hazards involved.
  • Never allow children to handle the unit without supervision.
  • Cleaning and maintenance must not be carried out by children unless they are over 8 years of age and supervised.
  • Do not use the unit outdoors.
  • Do not disassemble the unit.
  • Do not immerse the unit in water.
  • Do not expose the unit to bumps, vibration, dust, or extreme humidity. This could lead to malfunctions, short circuits or damage to batteries and components.
  • Do not expose the unit to direct sunlight, flames or high temperatures.
  • Do not expose the unit to dripping water or splashes
  • Do not use the unit if it does not operate normally.
  • Do not repair the unit yourself. Only allow repairs to be carried out by a qualified person.
  • This unit has been designed for domestic use only. The manufacturer cannot be held responsible, and the guarantee will not apply, for any professional use that is not appropriate or does not comply with the instructions.
  • The unit may only be used as described in this manual.

BATTERY INFORMATION

  • To function properly, the unit must have the appropriate batteries inserted.
  • Only the recommended type of batteries should be used.
  • The batteries must be inserted the right way round.
  • The battery terminals must not be short-circuited.
  • Do not mix new and used batteries.
  • Do not mix alkaline, standard (carbon-zinc) and rechargeable (nickel – cadmium) batteries.
  • Do not recharge the batteries or attempt to open them.
  • Do not dispose of batteries in fire.
  • Remove the batteries from the unit when not in use for a long time.
  • Replace all batteries at the same time with new, identical batteries.
  • If the liquid from a battery comes into contact with your eyes or skin, wash the affected area immediately and thoroughly with clean water and seek medical attention.
  • Do not expose batteries to excessive heat such as sunlight, fire or similar.

DESCRIPTION

NASA WS100 Weather Station - DESCRIPTION

  1. Weather station
  2. LCD screen
  3. LIGHT button
  4. SNOOZE button
  5. MAX/MIN button
  6. UP(+)/DOWN(-) button
  7. MODE button
  8. Battery compartment for the alarm
  9. Clock
  10. Day of the week
  11. Temperature
  12. Humidity
  13. Current weather
  14. Comfort level
  15. Temperature trend

FUNCTIONS

  • Date, time and days of the week
  • Current weather
  • Alarm and snooze function
  • Indoor temperature (0°C ~ 60°C)
  • Indoor humidity (20% ~ 95%)
  • Storage of min. and max. temperatures and humidity levels
  • Time display: 12/24 hours
  • Temperature display: C/F
  • Backlighting

POWER SUPPLY

  • Carefully open the battery compartment cover.
  • Insert 3 x AAA 1,5V batteries (not included), respecting the polarity indicated.
  • Close the battery compartment.

INSTALLATION / USE

  1. INSTALLATION
    – Place the weather station on a flat horizontal surface.

  2. USE OF THE WHETHER STATION
    WEATHER INDICATOR
    When the unit is turned on, the weather station will show the weather conditions in the form of icons: sunny, cloudy, rainy.
    TEMPERATURE ET HUMIDITY
    The weather station displays the following information:
    – Indoor temperature (11)
    – Indoor humidity rate (12)
    CHOOSING THE TEMPERATURE UNIT
    – Press the (DOWN) button to select the temperature unit: °C (Celsius) and °F (Fahrenheit).
    MAX/MIN VALUES FOR TEMPERATURE AND HUMIDITY
    – Press the (MAX/MIN) button to toggle the display between the current temperature and humidity values and the MIN/MAX values.
    – The MIN/MAX values for temperature and humidity are saved automatically and automatically reset every day at 00:00.

  3. SETTING THE TIME
    – Press and hold the (MODE) button for 3 seconds to enter the time setting mode.
    – Use the (UP) and (DOWN) buttons to adjust the values. Hold the buttons down to speed up scrolling.
    – Press the (MODE) button to confirm.
    – If the buttons are not pressed, the unit returns to the normal display after 10 seconds.

  4. SETTING THE DATE
    – Press the (MODE) button twice to select the Date function.
    – Press the (MODE) button for 3 seconds to enter the setting mode.
    – Use the (UP) and (DOWN) buttons to adjust the values. Hold the buttons down to speed up scrolling.
    – Press the (MODE) button to confirm.
    – If the buttons are not pressed, the unit returns to the normal display after 10 seconds.

  5. SETTING THE ALARM
    – Press the (MODE) button 3 times to select the Alarm function.
    – Press the (MODE) button for 3 seconds to enter the setting mode.
    – Use the (UP) and (DOWN) buttons to adjust the values. Hold the buttons down to speed up scrolling.
    – Press the (MODE) button to confirm.
    – If the buttons are not pressed, the unit returns to the normal display after 10 seconds.
    ACTIVATING/DEACTIVATING THE ALARM
    – Press the (UP) button to activate ( ) or deactivate the alarm (no symbol is displayed).
    STOPPING THE ALARM
    – The alarm will go off at the programmed time. To stop the alarm, press the (UP) button; it will sound again the next day at the same time.
    SNOOZING THE ALARM (SNOOZE)
    – When the alarm sounds, press the (SNZ) button: the symbol will flash and the alarm will stop.
    The alarm will sound again after 8 minutes.
    – Then press the (UP) button to deactivate the snooze function.

  6. CHANGING THE TIME DISPLAY FORMAT (12 > 24)
    – Enter the Alarm mode and hold the UP button until the display returns to the Time mode.
    – The time display format will change.

  7. COMFORT LEVEL : ICONS

| |
---|---|---
Humidity between 40% and 70% and temperature between 20°C (68°F) and 25°C (77°F)| Humidity of 70% or more| Humidity of 40% or less
8. BACK LIGHTING
– By default, the backlight is off (to save energy).
– Press the (LIGHT) button to activate the backlight for 7 seconds.

  1. CLEANING AND MAINTENANCE
    – Before cleaning the unit, disconnect the power supply (remove the batteries).
    – Only clean the outside of the unit and use a dry cloth. Do not use cleaning fluids to avoid damaging the electronics.

|  Notice of compliance for the European Union : products bearing the CE mark comply with the applicable European directives and associated harmonized European standards.
---|---
| U.S. Compliance Notice: Products bearing the FCC mark comply with the applicable guidelines and standards of the Federal Communications Commission.
| Disposal of waste equipment by users in the European Union: this symbol means that according to local laws and regulations, it is prohibited to dispose of this product with household waste. Instead, it is your responsibility to protect the environment and human health by handing over your used device to a designated collection point for the recycling of waste electrical and electronic equipment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
| The “Triman” logo indicates that the product or packaging should not be thrown in the household waste bin; instead they should be separated for recycling or taken to a collection point (bins in stores, recycling centre, etc.) to be recycled.

After sales service
@: [email protected]
– Tél. : + 33 (0) 1.85.49.10.26
Product manufactured for and distributed by:
GT COMPANY UK LTD – 11 Old Jewry – EC2R 8DU LONDON – UNITED KINGDOM
+33 (0) 1.61.10.09.25 – www.gtcompany.fr
NASA space program imagery: Source – International Space Archives LLC. NASA does not design, manufacture, distribute or endorse GT Company weather stations nor provide warranty support of GT Company weather stations. For service, support and warranty information on this product, contact the distributor or GT Company.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

NASA User Manuals

Related Manuals