JETBeam BR10 PRO Rechargeable Bike Light User Manual

: June 6, 2024
: JETBeam

Table of Contents

Features
Specifications
Output & Runtime
Manual Operation
Mounting/ Dismounting
Light Maintenance
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BR10 PRO Rechargeable Bike Light
User Manual

Thank you for choosing our products! www.jetbeamlight.com

Features

Specially designed for all kinds of riding.
Uses one Luminus SST-40 LED with a lifespan of 50,000 hours.
Max output of 1380 lumens and a throw distance of 240meters.
Powered by a 121700 Li-ion battery, compatible with an 118650 or 2*CR123A battery.
Convenient single side switch for easy access to the simplified five outputs plus strobe.
360° rotatable mechanism to adjust beam angle for different applications.
Built-in USB Type-C charging port.
Digitally regulated circuit and intelligent temperature control system to optimize the performance and maximize LED lifespan.
Low power indicator LED reminds the user of battery replacement and remaining power level.
Reverse polarity protection to prevent damage caused by improper battery insertion.
Toughened ultra-clear mineral glass with an anti-reflective coating.
Constructed from aero grade aluminum alloy.
HAI military-grade hard-anodized finish.
Quick-release bicycle mount allows mounting/dismounting of the light.
Waterproof to IPX-8 standard.

Specifications

LED: Luminus SST-40 LED
Maximum output: 1380 lumens
Reflector: Precise smooth reflector
Lens: Coated toughened glass
Body material: Aero grade aluminum alloy
Finish: HA Ill military grade hard-anodized
Battery: 121700/118650/2CR123Abattery
Switch: Convenient Single Side Switch
Dimensions: 126.6mm (Length)x31.5mm (Head)
Weight: 100.5g (Without battery and bracket)

Battery for Use

| Type| Nominal Voltage| Compatibility
---|---|---|---
Rechargeable Lithium battery| 21700| 3.7V| Yes(recommended)
Rechargeable Lithium battery| 18650| 3.7V| Yes(recommended)
Disposable Lithium battery| CR123A| 3.0V| Yes

Output & Runtime

FL1STANDARD| Turbo| High| Medium| Low| Eco| Strobe
---|---|---|---|---|---|---
| 1380LM| 480LM| 240LM| 7OLM| 2LM| 1380LM
| 3.5h| 5h| 9.5h| 20h| 650h|
| 240m
| 14400cd
| 1.5m (Impact Resistance)
| IPX-8 (Underwater 2 meters)

Note
The above data complies with the American National Standard Institute ANSI/NEMA Fil Standard. Data were obtained by using one JETBeam 3.6V 51 00mAh rechargeable 21700 battery in the lab. Different data may result when using different batteries.

Manual Operation

Battery Installation
Unscrew the tail of the light and insert the battery into the light according to the illustration below. Ensure that the positive end of the battery is pointed toward the head.

Warning

The light can not work if the battery polarity is reversed
Do not shine the light beam directly into your eyes.

Mounting/ Dismounting

On/Off
Short press the side switch to turn on, keep pressing the side switch for 0.5 seconds to turn off.
Mode Change
When the light is on, short press the switch can change the brightness mode, cycling by Turbo–High–Mid- Low–Eco.
Strobe Mode
Double press the side switch will access strobe, press the switch again will return off the strobe.
Power Indicator
When the light is turned on, the LED beneath the side the switch will indicate the battery level Stay in Green, battery powerfully charged Flash in Green, battery power is sufficient
Flash in Red, battery power is low Keep in Red, battery power is extremely low and needs recharging.
Charging
Built-in Type-C charging port, Max input 5V 1 A. In the charging process, the red LED under the side switch will flash, the green LED will be constant on when charging
is completely done.
Intelligent Temperature Control
The built-in intelligent temperature control system automatically balances the brightness and temperature to maximize the lifespan of the circuit and LED chip, and also avoid uncomfort caused by overheating.
Over-Discharging Protection
When the battery is low, the brightness will step down gradually till low output to extend the working time. The bike light will be turned off when the battery is ultra-low.
Lock and unlock
When the light is off and unlocked state, long-press the switch, the bike light flashes twice will enter the lock state; in the lock state, click or double click, the bike light flashes once means the light is in the lock state. Keep pressing till the bike light flashes two times unlocked into standby.

Light Maintenance

Take the battery out for storage if the light will not be used for a long time
Keep the light away from heat, static electricity, and high humidity
Clean the thread and conductive contact of light with a soft cloth. Lubricate the threads every 6 months

Warranty
We provide 60 months (5 years) of the warranty period for this product from the date of purchase in case defects are caused by material or workmanship with normal use. Necessary material and labor costs will be charged after this period Free warranty does not cover any damages or failure if:

This product is disassembled or modified by anyone other than an authorized JETBeam warranty technician.
This product is damaged by using the wrong battery or incorrect usage.
This product is damaged by defective batteries (such as battery leak).
Saltwater and corrosive damage to the unit.

Service