BRESSER 8020315CM3000 MyTime DCF Thermo Hygro Wanduhr Wall Clock Instruction Manual

BRESSER 8020315CM3000 MyTime DCF Thermo Hygro Wanduhr Wall Clock

Product Information

Specifications

• Product Name: MyTime Thermo/Hygro Wall Clock
• Model Variants:
  • Art. No. 8020315 CM3000: Black
  • Art. No. 8020315 GYE000: White
  • Art. No. 8020315 E8G000: Red
  • Art. No. 8020315 WXH000: Blue
  • Art. No. 8020315 B4K000: Green
  • Art. No. 8020315 MGU000: Anthracite
  • Art. No. 8020315 URJ000: Purple
  • Art. No. 8020315 SX9000: Sky Blue
  • Art. No. 8020315 PET000: Petrol
• Battery Requirement: 1 x 1.5V Battery (Size AA/LR6)
• Batteries not included

Product Usage Instructions

Installation and Set Up
To install and set up the MyTime Thermo/Hygro Wall Clock, follow these steps:

1. Remove the safety pin (10) from the clock mechanism.
2. Insert a 1.5V battery (AA/LR6) into the battery compartment (6).

Setting the Time
To set the time on the wall clock, follow these steps:

1. Wait for approximately 2-5 minutes until the current time is displayed.

Manual Time Signal Reception
If the automatic daylight saving time change was not detected or if the wall clock temporarily lost DCF reception, you can manually initiate the time signal reception by following these steps:

• Wait for approximately 2-5 minutes until the current time is displayed.

Temperature and Humidity Display
The temperature (4) and humidity (3) measurements are displayed manually. It may take some time for the current measured values to be displayed.

Mounting/Positioning
To mount or position the wall clock, refer to the provided installation instructions.

FAQ

• Q: What batteries does the MyTime Thermo/Hygro Wall Clock require?
  A: The wall clock requires a 1 x 1.5V battery (Size AA/LR6), which is not included in the package.

• Q: How can I manually initiate the time signal reception?
  A: If the automatic daylight saving time change was not detected or if the wall clock temporarily lost DCF reception, follow the steps mentioned in the manual to manually initiate the time signal reception.

• Q: How long does it take for the temperature and humidity measurements to be displayed?
  A: It may take some time for the current measured temperature and humidity values to be displayed. Please wait patiently for the readings to appear.

ABOUT THIS INSTRUCTION MANUAL

These operating instructions are to be considered a component of the device. Please read the safety instructions and the operating instructions carefully before use. Keep these instructions for renewed use at a later date. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/user of the product. This product is intended only for private use.

GENERAL WARNINGS

CHOKING HAZARD!
Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as these materials pose a choking hazard.

RISK of ELECTRIC SHOCK!
This device contains electronic components that operate via a power source (batteries). Children should only use the device under adult supervision. Only use the device as described in the manual; otherwise, you run the risk of an electric shock.

RISK of FIRE/EXPLOSION!
Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short-circuit, a fire, or an explosion!

NOTE!

• Do not immerse the unit in water.
• Do not subject the unit to excessive force, shock, dust, extreme temperature, or high humidity, which may result in malfunction, shorter electronic life span, damaged batteries, and distorted parts.
• Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
• Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. Remove the batteries from the unit if it has not been used for a long time.
• The manufacturer is not liable for damage related to improperly installed batteries!

GENERAL INFORMATION

This item is available in different variants. The functions and technical data are the same. They only differ in their design/color.

SCOPE OF DELIVERY (Fig. 1)

• Wall clock, Instruction manual
• Required batteries: 1 x 1.5V battery (Size AA/LR6) Batteries not included with purchase.

PARTS OVERVIEW

Wall clock (Fig. 2)

1. Dial plate
2. Clock hands (hours, minutes, seconds)
3. Humidity display (indoor)
4. Temperature display (indoor)
5. Wall mount
6. Battery compartment
7. RESET button
8. REC button
9. M.SET button
10. Locking pin

GETTING STARTED/POWER SUPPLY

1. Remove the locking pin (10) from the clockwork. The clock can be operated only after the pin has been removed.
2. Insert one battery (1.5V, AA/LR6) into the battery compartment (6).

TIME SETTING

NOTE!
After the clock receives the DCF time signal the time will be set according to the Central European Time (CET). Summer and winter time change (and reverse) is also set automatically.

Automatic time setting via DCF time signal
After inserting the battery the time will be set automatically via a DCF signal. This process may take a few minutes. During this process, the clock hands will turn several times with interruption until they will display the right time.

Initiate receiving the DCF time signal manually
NOTE!
Use this function when e.g. automatic summer/winter time change does not work or the wall clock temporarily receives no time signal.

1. Press and hold the REC button (8) for 3 seconds to start the manual search for the DCF signal.
2. The clock hands will move to their start position (noon) and a wall clock then try to receive the signal.
3. Wait approx. 2-5 minutes until the current time will be displayed.

Manual time setting
NOTE!
It is necessary to set the time manually in places where no radio signal is received.

1. Press and hold the M.SET button (9) for approx. 3 seconds.
2. When the minutes hand starts moving you can set the time manually:
   • Press the M.SET button shortly to set the time in minutes steps.
   • Press and hold the M.SET button to set the time continuously.
3. Release the M.SET button to stop manual settings save the time automatically and exit manual time setting mode.

TEMPERATURE AND HUMIDITY DISPLAY

Temperature and humidity measurement work manually. It may take a few minutes until the value that is currently measured will be displayed.

MOUNTING/POSITIONING

NOTE!

• Make sure you have mounted or safely placed the device. Otherwise, the device may fall and heavy damages can occur for which the manufacturer is not liable.
• The wall clock can be mounted on walls with the wall mount (5).

TROUBLESHOOTING

Transmission collision
Signals from other household devices, such as doorbells, home security systems, and entry controls, may interfere with those of this product and cause temporary reception failure. This is normal and does not affect the general performance of the product. The transmission of the radio signal will resume once the interference re-cedes.

Other malfunctions
If there is no response from the wall clock by keystrokes or if any other malfunctions occur perform the following steps.

NOTE!
With this procedure, all received data will be deleted.

1. Press the RESET button (7) with a pointed instrument (e.g. pen).
2. The clock hands will move to their start position (midnight) and the wall clock then tries to receive the signal.
3. Wait approx. 2-5 minutes until the current time will be displayed.

CLEANING AND MAINTENANCE

Before cleaning the device, disconnect it from the power supply (remove batteries)! Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid. Protect the device from dust and moisture. The batteries should be removed from the unit if it has not been used for a long time.

DISPOSAL

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.

Do not dispose of electronic devices in the household garbage!

As per Directive 2002/96/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.

WARRANTY & SERVICE

The regular warranty period is 2 years and begins on the day of purchase. To benefit from an extended voluntary warranty period as stated on the gift box, registration on our website is required.
You can consult the full warranty terms as well as information on extending the warranty period and details of our services at www.bresser.de/warranty_terms.

EC DECLARATION OF CONFORMITY
Hereby, Bresser GmbH declares that the equipment type with article number 8020315000000 complies with Directive: 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://www.bresser.de/download/8020315000000/8020315000000_CE.pdf

Bresser GmbH Gutenbergstraße 2 46414 Rhede · Germany
www.bresser.de
@BresserEurope

Bresser UK Ltd.
Suite 3G, Eden House Enterprise Way Edenbridge, Kent TN8 6HF Great Britain
Errors and technical changes are reserved.

References

• Bresser | Startseite | Expand Your Horizon mit BRESSER
• Bresser | Startseite | Expand Your Horizon mit BRESSER
• Bresser | BRESSER MyTime DCF Thermo-/Hygro-Wanduhr 25 cm | Expand Your Horizon

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>