BenQ TEY1A EDLA Certified Premium Slot In PC User Manual

: June 17, 2024
: BenQ

Table of Contents

Copyright and disclaimer
Product Support
Package contents
Port overview
Initial setup
Launch OPS interface
OPS launcher interface
Add widgets to your Home screen
Find apps on Android
Product information
Dimensions (TEY1A)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BenQ TEY1A EDLA Certified Premium Slot In PC User ManualBenQ TEY1A EDLA Certified Premium Slot In PC

Copyright and disclaimer

Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents of this document. BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes.
HDMI trademark disclaimer
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Copyright

Copyright 2023 BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.

Product Support

This document aims to provide the most updated and accurate information to customers, and thus all contents may be modified from time to time without prior notice. Please visit the website for the latest version of this document and other product information. Available files vary by model.

Make sure your computer is connected to the Internet.
Visit the local website from www.BenQ.com. The website layout and content may vary by region/country.
User manual and related document: www.BenQ.com > Business > SUPPORT > Downloads > model name > User Manual
(EU only) Dismantled information: Available on the user manual download page. This document is provided based on Regulation (EU) 2019/2021 to repair or recycle your product.
Always contact the local customer service for servicing within the warranty period. If you wish to repair an out-of-warranty product, you are recommended to go to a qualified service personnel and obtain repair parts from BenQ to ensure compatibility. Do not disassemble the product unless you are aware of the consequences. If you cannot find the dismantled information on your product, contact the local customer service for assistance.

Package contents

Open the sales package and check the contents. If any item is missing or damaged, please contact your dealer immediately.

OPS
Antenna x3
**Safety statements

**

Before discarding the package, check that you haven’t left any accessories inside the box.
Dispose of packaging materials wisely. You can recycle the cardboard carton. Consider storing the package (if possible) for future transport of the display.
Do not leave plastic bags within reach of young children or babies

Port overview

TEY1A

No.		Description
1	Antenna	Wi-Fi antenna interface
2	HDD LED	Hard Disk Drive indicator light
3	RJ45	RJ-45 Ethernet network connector
4	USB 1 / USB 2 / USB 3	USB 3.0 connectors
5	Lock	Lock for security
6	RESET	Long press 6 seconds to reset the device to factory settings.
7	MIC-IN	Connects to an external microphone.
8	LINE-OUT	Connects to the front left and right channel speakers of

Port overview

Initial setup

Install the antennas on the product.
Remove the OPS cover of the display.
Insert the product into the PC slot of the display.

The place of the OPS slot varies between models
Secure the product to the display with the provided screws.

Launch OPS interface

In the original interface of your display, select > OPS to activate the launcher.
For the first setup, follow the on-screen steps to complete the initial settings.

OPS launcher interface

A.Back
B.Home
C.Recent apps

To learn how to access apps, notifications and quick settings, see 3-button navigation in Google Guidebooks
for details.

Add widgets to your Home screen

On a Home screen, touch and hold an empty space.
Tap Widgets.
Find the app that has the widget you want.
Tap and hold the widget.
Drag the widget to where you want it. Lift your finger

To customize your home screen, see Add apps, shortcuts & widgets to your Home screens and Change what’s on your Home screen on Android in Android Help for details.

Find apps on Android

To access all your apps, swipe up from the bottom of your screen to the top.
Find apps on Android

See Find, open & close apps on Android in Android Help for details.

Product information

Specifications: TEY1A

Operation System	Android 13
CPU	MTK 8195

A784+A554

Wifi 6 Antenna x3

Dimensions (TEY1A)

Unit: mm

Dimensions

CE DOC

DECLARATION OF CONFORMITY
The device complies with the requirements set outing the Council Directives relevant Union
harmonisation legislation:
RE Directive (2014/53/EU)
Laws of the Member States relating Electromagnetic Compatibility (2014/30/EU)
Low Voltage Directive (2014/35/EU)
RoHS Directive2011/65/EU & (EU) 2015/863

UKCA Declaration of Conformity
The object of the declaration described above is in conformity with the relevant UK harmonisation legislation:

Radio Equipment Regulations 2017 (S.I.2017/1206)
The Restriction of the Use of Certain Hazardous Substances In Electrical and Electronic Equipment Regulations 2012
Electromagnetic Compatibility Regulations 2016
Electrical Equipment (Safety) Regulations 2016
WEEE Directive 2012/19/EU SAR information for radio equipment in France 2020-03-18 Guide Réglementation DASVf Decree 2019-1186 of 15 November 2019 relating to the display of the specific absorption rate of radioelectric equipment.
The minimum distance between the user and/or any bystander and the radiating structure of the transmitter is 20cm.

**WEEE

WEEE Directive **

Disposal of Waste Electrical and Electronic Equipment and/orBattery by usership private households the European Union.
This symbol on the product or on the packaging indicates that this can not be disposed of as household waste.You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery. For more information about recycling of this equipment and/or battery,please contact your city office,the shop where you purchased the equipment or your household waste disposal service.The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and environment.
Recycling information: See https://www.benq.com/en-us/support/recycling /global-recycle.html
for details.

EU REACH SVHC Disclosure on Candidate List
REACH (Registration, Evaluation,Authorization and Restriction of Chemicals, EC 1907/2006) is the European Union’s (EU) chemical substances regulatory framework. REACH requires BenQ Corporation to provide customers with sufficient information on Substances of Very High Concern (SVHC) contained in products in concentration above 0.1% weight by weight (w/w) to allow safe use of the product.g 0.1 weight% and 0.01 weight for cadmium except for exemptions set in Schedule 2 of the Rule.
RoHS Statement
This product is compliant to implemented RoHS (Restriction of Hazardous Substances ) type regulations worldwide, including but not limited to China, India, Korea and European Union.

Coarse Classificat ion	Chemical Substance Table
Pb	Hg
Plastics	O
Metals	exempted
Main PCBA	exempted
Cables	O

*:PCBA consisted of bare printed circuit board, soldering and its surface-mounted elements, such as resistors, capacitors, arrays, connectors, chips, etc.

NOTE 1:The “O” indicates that the percentage content of the substance to be calculated is not exceeding the reference percentage content of EU RoHS directive (2011/65/EU & EU 2015/863).

NOTE 2:The “exempted” item means that the specified chemical substance corresponds to the items exempted by the EU RoHS directive (2011/65/EU & EU 2015/863).

India RoHS
Restriction on Hazardous Substances statement (India).This product complies with the “India” E-waste Rule 2016″ and prohibits use of lead, mercury, hexavalent chromium,polybrominated biphenyls or PolyBrominated Diphenyl Ethers in concentrations exceeding 0.1 weight% and 0.01 weight for cadmium except for exemptions set in Schedule 2 of the Rule.

FCC statement (for the United States only)

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses,and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the
following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1)This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution:Any changes ormodifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RF exposure information

Radiation Exposure Statement

Model Name: TEY1A| This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Caution:
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii)The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470- 5725 MHz shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices the band 5725-5825 MHz shall comply with the e.i.r.p.limitsspecified for point-to-point and non point-to-point operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated as primary users(i.e. priority users) of the bands 5250 – 5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
FCC FCC Supplier’s Declaration of Conformity (SDoC):

Responsible Party Name: BenQ America Corp.
Address: 3200 Park Center Drive, Suite 150, Costa Mesa, CA 92626
Telephone: (714) 559-4900Declares below product complies with FCC Part 15 Subpart B
Product name: OPS PC module
Model number: TEY1A
Supplementary information
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1)This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC statement (for Canadian users)
This Class B digital apparatus complies with Canadian ICES-003(B).
Cet appareil numérique de la classe A est conforme à la normeNMB-003(B) du Canada. This device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions:(1) this device may not cause interference,and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1)l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,même si le brouillage est susceptible d’en compromettre le fonctionnement.

Important note:

Model Name	Type	Gain	Connector
HDC-300	External antenna	2.4GHz	5.2GHz

RP-SMA

5 dBi| 5 dBi| 5 dBi

The device for operation in the band 5150-5250MHz is only for indoor use.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
RF Exposure Information
This equipment complies with IC radiation exposure limitsset forth for an uncontrolled environment. This equipment should be installed and operated with 20cm between the radiator & your body.
For EU
The operating frequency bands and the maximum transmitted power limit are listed below:
2402-2480MHz(Bluetooth), 9.10 dBm
2412-2472MHz(Wi-Fi 2.4GHz), 19.94 dBm
5180MHz-5240MHz(Wi-Fi 5GHz), 19.66 dBm
5260MHz-5320MHz(Wi-Fi 5GHz), 19.44 dBm
5500MHz-5700MHz(Wi-Fi 5GHz), 19.57 dBm
5745MHz-5825MHz(Wi-Fi 5GHz), 13.63 dBm

Restrictions Operation in the 5150-5350 MHz band is restricted to indoor use only.

| BE| BG| CZ| DK| DE| EE| IE
EL| ES| FR| HR| IT| CY| LV
LT| LU| HU| MT| NL| AT| PL
PT| RO| SI| SK| Fl| SE| NO
IS| LI| CH| TR| UK(NI )| |

EU RF Exposure Information
This device meets the EU requirements and the International Commission on Non- Ionizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. This equipment should be installed and operated to ensure a minimum of 20 cm spacing to any person at all times. Logo