BENQ HT1070 DLP Projector User Manual

The above numbers are approximate and may be slightly different from the actual measurements. Only the recommended screen sizes are listed.
If your screen size is not in the table above, please contact your dealer for assistance.

Ceiling Mount Installation

For further information, please refer to the enclosed user manual.

Specifications

**** All specifications are subject to change without notice.

Optical
Resolution: 1080p
Display system: Single-chip DLPTM system
Lens F/Number: F = 2.59 to 2.87, f = 16.88 to 21.88 mm
Lamp: 210 W lamp
Electrical
Power supply: AC100 – 240 V, 3.0 A
50/60 Hz (Automatic)
Power consumption: 300 W (Max); < 0.5 W (Standby)
Mechanical
Weight: 5.83 lbs (2.65 Kg)
Output terminals
Speaker: (Mono) 10 watt (peak-to-peak)
Audio signal output: PC audio jack x 1
USB: Type A 1.5 A
Control
USB: Mini B Type
RS-232 serial control:
9 pin x 1
IR receiver x 2
Input terminals
Computer input
RGB input: D-Sub 15-pin (female) x 1
Video signal input
VIDEO: RCA jack x 1
SD/HDTV signal input
Analog – Component
D-Sub 15-pin (female)
Digital – HDMI1 x 1
HDMI2/MHL x 1
Audio signal input
Audio in
PC audio jack x 1
RCA audio jack (L/R) x 1
Environmental Requirements
Operating temperature: 0°C – 40°C at sea level
Operating relative humidity: 10% – 90% (without condensation)
Operating altitude:
0 – 1499 m at 0°C – 35°C
1500 – 3000 m at 0°C – 30°C
(with High Altitude Mode on)
Storage Temperature: -20° – 60°C
Storage Humidity: 10 – 90%RH (without condensation)