BenQ HT1070A Digital Projector User Guide
- June 17, 2024
- BenQ
Table of Contents
BenQ HT1070A Digital Projector User Guide
WARNING INSTRUCTION
PAKCAGE CONTENT
Remote control
- Bright Boost is not supported by this model.
Projector dimensions
The above numbers are approximate and may be slightly different from the actual measurements. Only the recommended screen sizes are listed. If your screen size is not in the table above, please contact your dealer for assistance.
Ceiling mount screw: M4
(Max L = 25 mm; Min L=20 mm)
Unit: mm
DIMENSION
INSTALLATION INSTRUCTION
Specifications
| Optical | Input terminals |
|---|
Resolution
1920 x 1080 1080p| Computer input
RGB input
Display system| D-Sub 15-pin (female) x 1
1-CHIP DMD| Video signal input
F = 2.42 to 2.62| Digital signal inp
f = 19.0 to 22.65 mm| HDMI x 2
Offset| Audio signal input
107±5%| Audio in
Zoom ratio| PC audio jack x 1
1.2X| Environmental Requirements
Lamp| Temperature
210 W lamp| Operating: 0°C-40°C at sea level
Electrical| Storage: -20°C-60°C at sea level
Power supply| Power supply
AC100–240V, 2.60 A, 50-60 Hz (Automatic)| Operating: 10%-90% (without
condensation)
Power consumption 260 W (Max); < 0.5 W (Standby)| Storage: 10%-90% (without
condensation)
Output terminals| Mode on)
Speaker| Storage: 0-12200 m at 30°C
(Stereo) 2 watt x 1| Transporting
Audio signal output| Original packing or equivalent is recommended
Control| Repairing
RS-232 serial control| Please visit below website and choose
9 pin x 1| your country to find your service contact
IR receiver x 1| IR receiver x 1
USB mini-B x 1| http://www.benq.com/welcome
Lamp life results will vary depending on environmental conditions and usage.
For further information, please refer to the enclosed user manual.
- Arsenic-free optical glass
© 2017 BenQ Corporation.
All rights reserved. Rights of modification reserved.
PKJ39-4000-02
P/N: 4J.JH101.003
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>