BRANDMOTION 9002-3001 Ultrasonic Rear Park Aid Truck Extended Length Harness Instruction Manual
- June 17, 2024
- BRANDMOTION
Table of Contents
INSTALLATION INSTRUCTIONS
Ultrasonic Rear Park Aid
Truck extended length harness
(Kit # 9002-3001)
9002-3001 Ultrasonic Rear Park Aid Truck Extended Length Harness
Please read thoroughly before starting installation and check that kit
contents are complete.
Items Included in the Kit:
Truck Wiring Harnesses
These Instructions
The Brandmotion Rear Park Aid (RPA) is designed to be a convenience aid to
assist in backing your vehicle towards other vehicles and obstacles. It is not
a safety system.
Normal visual vigilance while backing is still recommended.
Safety Precautions:
- Work in well ventilated area that is clear of obstructions.
- Secure vehicle with tire chucks in both front and rear of tires.
- Turn vehicle accessories OFF and ensure ignition key is in OFF position.
- Wear safety goggles and snug fitting clothes.
- Use tools only for their intended purpose and which are in good repair.
- Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation
instructions.
IMPORTANT: The Brandmotion Rear Park Aid (RPA) is designed to be a
convenience aid to assist in backing your vehicle towards other vehicles and
obstacles. It is not a safety system. Normal visual vigilance while backing is
still recommended.
- Use this 1 harness for the 4 rear sensors instead of 4 sensors harness that came with the 9002-3000. Install the metal the plugs with threaded end locks into the sensors, the white plastic connectors plug into the ECU.
9002-3001 Instructions 9-29-15
https://manual-hub.com/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>