IPEVO P2V Ultra Point To View 13MP USB Camera User Manual
- June 17, 2024
- IPEVO
Table of Contents
IPEVO P2V Ultra Point To View 13MP USB Camera
Product Information
Specifications
- Product Name: IPEVO P2V Ultra
- Model: CDVU-16IP
- Resolution: 13MP
- Interface: USB
- Power Input: 5V, 0.5A
- Country of Origin: Thailand
Product Name | IPEVO P2V ULTRA POINT-TO-VIEW 13MP USB Camera |
---|---|
Model | CDVU-16IP |
Input | 5V—0.5A |
Operation Temperature | 0°C to 40°C |
Country of Manufacture | Made in Thailand |
The IPEVO POINT-TO-VIEW 13MP USB Camera is a versatile and powerful camera designed for a variety of uses. For more information, visit IPEVO | innovating communications.
Visual Guide and Controls
The camera features an autofocus function with continuous (AF-C) and single- shot (AF-S) modes, a USB-C port for connectivity, and various other controls for LED and microphone settings. The device also includes a rotatable camera head and multi-jointed stand for flexible positioning.
Usage and Support
For support, please visit the IPEVO P2V ULTRA support page at IPEVO P2V ULTRA – Support – IPEVO US.
Software
To enhance the functionality of the IPEVO P2V ULTRA, consider using IPEVO Visualizer and IPEVO CamControl software. Find out more at IPEVO Visualizer – Overview | IPEVO and IPEVO CamControl – Overview | IPEVO.
Product Usage Instructions
1. Installation
To use the IPEVO P2V Ultra camera, follow the steps below:
- Connect the camera to your computer using the provided USB cable.
- If you haven’t already, download and install the IPEVO Visualizer software from www.ipevo.com/visualizer.
- If you want to control the camera settings, download and install the IPEVO CamControl software from www.ipevo.com/camcontrol.
- Once the software is installed, launch the IPEVO Visualizer or CamControl application.
2. Camera Settings
The IPEVO P2V Ultra camera has various settings that can be adjusted. Here are some of the key settings:
- LED: The LED can be turned on or off using the software.
- MIC: The microphone can be turned on or off.
- AI MIC: The AI microphone can be turned on or off.
- AF-C: Auto Focus Continuous mode.
- AF-S: Auto Focus Single mode.
3. Troubleshooting
If you encounter any issues with the IPEVO P2V Ultra camera, try the following troubleshooting steps:
- Make sure the camera is properly connected to your computer.
- Check if the camera drivers are up to date.
- Restart your computer and relaunch the software.
- Try using a different USB port on your computer.
- If the issue persists, refer to the support page at www.ipevo.com/products/p2v-ultra/support for further assistance.
Frequently Asked Questions
- Q: Where can I download the software for controlling the camera settings?
- A: You can download the IPEVO CamControl software from www.ipevo.com/camcontrol.
Q: What is the resolution of the IPEVO P2V Ultra camera?
A: The camera has a resolution of 13MP.
Q: Can I turn off the LED light on the camera?
A: Yes, you can turn off the LED light using the software.
Q: How do I adjust the focus of the camera?
A: The camera has two focus modes: Auto Focus Continuous (AF-C) and Auto Focus Single (AF-S). You can select the desired mode in the software.
Q: What software can be used with the IPEVO P2V ULTRA Camera?
A: You can use the IPEVO Visualizer and IPEVO CamControl software to enhance your experience with the camera.
Q: Where can I find support for the IPEVO P2V ULTRA Camera?
A: Support for the camera can be found on the IPEVO P2V ULTRA support page.
Q: Can the IPEVO P2V ULTRA Camera cause interference with other devices?
A: Yes, it may cause harmful interference if not installed and used in accordance with the instructions. Measures to correct interference are provided in the FCC Declaration section.
Q: Is the IPEVO P2V ULTRA Camera RoHS compliant?
A: Yes, it is RoHS compliant, as evidenced by the RoHS markings on the product.
Q: What are the power requirements for the IPEVO P2V ULTRA Camera?
A: The camera requires a 5V—0.5A power input.
Q: Where is the IPEVO P2V ULTRA Camera made?
A: The camera is made in Thailand.
POINT-TO-VIEW 13MP USB Camera www.IPEVO.com
P2V ULTRA
IPEVO P2V Ultra
POINT-TO-VIEW 13MP USB
1
2
3
IPEVO P2V Ultra
1 1
IPEVO Visualizer 3
AF-C =
AF-S =
USB-C
4
5
www.ipevo.com/products/p2v-ultra/support
IPEVO Visualizer IPEVO www.ipevo.com/visualizer
IPEVO CamControl
www.ipevo.com/camcontrol
LED OFF = OFF = ON & AI MIC OFF = ON = ON & AI MIC ON
MIC = ON AI MIC = ON & AI ON MUTE =
!
/
FCC Declaration
Federal Communications Commission (FCC) Statement
This device complies with Pert 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the authority to operate equipment. This device and
its antenna must not be co-located or operating in conjunction with any other
antenna or transmitter.
For product available in the USA/Canada market, only channel 1 11 can be
operated. Selection of other channels is not possible.
Declaration of the Presence Condition of the Restricted Substances Marking
R35564 RoHS 20
R-R-1PV-P2V_Ultra
CAN ICES-003(B)/NMB-003(B)
PRODUCT / / : IPEVO P2V ULTRA POINT-TO-VIEW 13MP USB CAMERA POINT-TO-VIEW 13MP
USB POINT-TO-VIEW 13MP USB
MODEL / / : CDVU-16IP
INPUT / / : 5V0.5A
Operation temperature/ / 0° C to 40° C
MADE IN THAILAND/ /
References
- IPEVO CamControl - Overview | IPEVO
- IPEVO P2V ULTRA - Support – IPEVO US
- IPEVO Visualizer - Overview | IPEVO
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>