IPEVO USB Document Camera User Guide
- June 7, 2024
- IPEVO
Table of Contents
Quick Start
Guide
IPEVO DO-CAM
USB Document Camera
Customer Service
Email: cs@ipevo.com
Tel: +1-408-490-3085 (USA)
Copyright© 2020 IPEVO Corp. All rights reserved
The Basics
IPEVO DO-CAM USB Document Camera allows you to capture your materials and stream real-time images to your computer via USB. Its lightweight, and foldable design makes it portable for carrying around; while, its adjustable arm and camera head give you the flexibility for capturing at different heights and angles.
Unboxing DO-CAM
1. Open the packaging box and take DO-CAM out.
2. Remove the elastic band and padded cover.
*Please reuse the elastic band and padded cover for your DO-CAM. They keep your DO-CAM safe and compact for carrying around.
Getting to Know Your DO-CAM
(1) Camera Lift Handle:
Use this to lift up the camera head.
(2) Flip Button:
Press this button to flip your image right-side-up.
(3) LED Indicator:
Lights up when DO-CAM is in use and providing images.
(4) Camera:
8 megapixel camera. The camera head can be turned upwards or downwards.
(5) Arm:
Adjust the arm to change the height and position for capturing your material.
(6) Body:
Houses the USB cable.
(7) USB Cable:
Unwind the USB cable and plug it into your computer’s USB port to use DO-CAM.
(8) Base Plate:
Provides a stable base for your DO-CAM.
Setting Up and Connecting to a Computer
As with all IPEVO document cameras, DO-CAM features a plug and play design. You can set it up within a few simple steps.
1. Start by lifting the camera head.
2. Press against the base plate of DO-CAM and pull it up.
3.Turn DO-CAM around. Unwind the USB cable and plug it into the USB port of your computer [Mac, PC, or Chromebook].
4. Set DO-CAM in position by adjusting its body, arm, or/and camera head. Your DO-CAM is now ready for use.
Using DO-CAM with Compatible Software
As DO-CAM is a standard UVC camera, you can use it with a variety of software as long as they recognize the video source coming from a UVC camera. However, to fully utilize your DO-CAM, we’d recommend using it with IPEVO Visualizer software. Visualizer offers many useful features for your lessons or presentations, such as video recording, snapshot, and picture-in-picture.
If you’re using DO-CAM with third-party video conferencing software like Skype, Zoom, or Google Hangouts, you can use it in conjunction with IPEVO CamControl to adjust some basic camera settings such as rotate, exposure, and focus. You can download IPEVO Visualizer software and IPEVO CamControl from support.ipevo.com/do-cam.
Safety Information
Federal Communications Commission [FCC] Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: [1] this device may not cause harmful
interference, and [2] this device must accept any interference received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the authority to operate equipment.
This device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter.
For product available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
VCCI-B
Precaution
Do not use/store the product in the following
- Near heat sources
- Near steam or greasy smoke
- Locations with high humidity
- Sandy or dusty places
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>