IPEVO 2-VOCAL DONGLE, VOCAL AI Beamforming Bluetooth Speakerphone Instructions

IPEVO 2-VOCAL DONGLE, VOCAL AI Beamforming Bluetooth Speakerphone

Wirelessly Connect
2 IPEVO VOCAL Speakerphones

Knowing your
IPEVO 2-VOCAL DONGLE

Pairing jack and LED indicator

• Quick flash: Pairing
• Constantly On Paired
• Slow flash: Not paired

Start using the IPEVO 2-VOCAL DONGLE
Expanding the wireless conference space

Step 1

Connect the IPEVO 2-VOCAL DONGLE to the PC/Laptop directly.

Remarks
If you purchased the IPEVO DUET (1 IPEVO 2-VOCAL DONGLE + 2 IPEVO VOCAL), the connection is already pre-paired, so you can skip step 2 and proceed with step 3 directly.

Step 2

Insert the PIN into the first pairing jack (Vocal 1) long press it for 3 seconds to enter pairing mode (indicator flashes), and pair the IPEVO VOCAL is currently in pairing mode. Wait for the indicator on the IPEVO 2-VOCAL DONGLE to stay constantly on, and you can hear the IPEVO VOCAL prompt sound, which means that it was paired successfully. Next, insert the PIN into the second pairing jack (Vocal 2) to pair the second IPEVO VOCAL.

Step 3

Select IPEVO 2-VOCAL DONGLE in the meeting application as the microphone and speaker.

IPEVO VOCAL Instructions

1. It is recommended to adjust the IPEVO VOCAL speaker volume to maximum, turn on the AI MIC, and use OMNI omnidirectional reception mode.
2. Press and hold the mute button on a single IPEVO VOCAL for 3 seconds to mute/unmute all VOCALs connected to the IPEVO 2-VOCAL DONGLE.
3. Press the mute button on a single IPEVO VOCAL to mute/unmute a single IPEVO VOCAL. Please refer to the IPEVO VOCAL instruction manual for details.

Notes

• This product needs to be used with the IPEVO VOCAL AI Beamforming Bluetooth Speakerphone for it to work.
• The maximum connection distance between IPEVO 2-VOCAL DONGLE and VOCAL can reach up to 49 ft / 15 meters (there must be no large objects, such as walls, blocking in between).
• IPEVO 2-VOCAL DONGLE has a memory function and can pair automatically when switched on again. If previously paired IPEVO VOCALs cannot connect automatically, please repair such instances by following the instructions in Step 2.
• The optimal reception range for the IPEVO VOCAL is 5.9 ft (180 cm). It is advisable to position another VOCAL within 4.9 – 5.9 ft (150-180 cm), to prevent noise from each unit interfering with the other.

For a full user manual, FAQ & tech support, visit
www.ipevo.com/products/2-vocal- dongle/support

All trademarks, logos, and brands are the property of their respective owners and are used for identification purposes only.

Precaution

• Do not use/store the product in the following environments:
• Near heat sources
• Locations with high humidity
• Sandy or dusty places

Importer
United States
IPEVO Inc.
440 N. Wolfe Road, Sunnyvale,
CA 94085, USA

Manufacturer: IPEVO Corp.
Address: 1F., No.348, Sec. 6, Nanjing E. Rd., Neihu Dist., Taipei City 11470, Taiwan
Phone number: +886-2-55508686
Hersteller: IPEVO Corp.
Address: 1F., No.348, Sec. 6, Nanjing E. Rd., Neihu Dist., Taipei City 11470, Taiwan
Phone number: +886-2-55508686

FCC Declaration

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

IMPORTANT NOTE
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

Industry Canada statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement
This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>