OPTONICA LED Street Light User Guide
- June 17, 2024
- OPTONICA
Table of Contents
OPTONICA LED Street Light
Please take time to read this leaflet carefully and retain it for future reference.
OVERVIEW
IMPORTANT SAFETY INFORMATION
- Do not wire this floodlight into the lighting circuit – use a switched fused spur.
- Before installation and servicing disconnect the electrical supply at the mains.
- Carefully observe all instructions or warnings that are labeled on, or supplied with your product.
- This product is suitable for outdoor use. If in any doubt, consult a qualified electrician.
FIXING INSTRUCTIONS
Do not wire this floodlight into the lighting circuit – use a switched fused spur. This fitting must be earthed, contact a qualified electrician to install a suitable earth facility. Ensure the electricity is turned off at the mains before installing or maintaining any electrical fitting.
NOTE For new installations, check for any electrical cables or pipe work (gas/water) in the vicinity of the intended mounting point for this product, before proceeding with the installation.
GENERAL INFORMATION
Do not mount ceiling/wall fittings onto damp surfaces such as newly painted or
plastered areas as this may cause discoloration of the finish.
Tolls which may be required:
- Drill
- Cross Head Screwdriver
- Small Electrical Slotted Screwdriver
- Insulation Tape
INSTALLATION
This product should be disposed of responsibly at the end of its life. Please recycle where facilities exist. (Waste Electriacal ane Eceltronic Equipment Directive)
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>