CHANNEL VISION P-0925 Paging Module User Manual
- June 17, 2024
- Channel Vision
Table of Contents
CHANNEL VISION P-0925 Paging Module
USER MANUAL
P-0925
Paging Module
234 Fischer Avenue Costa Mesa, CA 92626
714-424-6500
800-840-0288
714-424-6510 fax
www.channelvision.com email: sales @
channelvision.com
The P-0925 allows Channel Vision’s C-0920 or TE110 to provide an audio output that may be connected to the paging input of a whole house amplifier. The new Channel Vision’s PRO form factor allows the P-0925 to be mounted in a structured wiring enclosure, a 19” rack*, or screwed to any flat surface.
- Enables paging from a C-0920 or TE110
- Simple connections
- Quick and easy installation
Note: be sure to use an amplifier that has an audio-sensing page input.
Such as the P-1014.
Product Dimensions: 1.5”W x 6.5″H x 1.25″D
Mounting Options
The P-1014 can also be mounted in a standard structured wiring enclosure or screwed to a wall or flat surface as shown below.
Whole House Paging with the P-1014
Channel Vision’s P-1014 A-BUS distribution module provides an integrated audio sensing local input that can be used as a paging input. Simply make the connections shown below and place the signal priority switch in the local position.
Operating Instructions
To make a page:
1. Pick up the telephone.
2. Press the activation key 3 times.
Note: the activation key may be either * or #.
This setting is determined by the TE110 or C-0920.
3. Make your announcement.
4. Hang up the telephone.
Example: (assume # is the activation key)
1. Pick up the telephone
2. Press pound 3 times
Note: the 3rd press may produce an audible tone in the speakers, this is normal.
3. Make the announcement
4. Hang up the telephone
Paging Only
Make all connections before applying power.
Follow this connection diagram if you only want to have whole-house paging without a front door intercom.
Additional Notes:
The P-0925 connects to the C-0920 or TE110 the same way one of Channel
Vision’s DP or IU door stations would. Thus, if a P-0925 is connected to the
C-0920, then the a door station cannot be connected.
For systems that require both paging and front door intercom, follow the diagram on the next page.
Paging & Door Intercom
Make all connections before applying power
When paging and door intercom are required, two C-0920 or TE110 units must be used and they must be configured to respond to different activation keys. Refer to C-0920 or TE110 manual for help setting the activation key.
Specifications:
- Model: P-0925
- Brand: CHANNEL VISION
- Page Output: Mono
- Dimensions: 1.5W x 6.5H x 1.25D
Features:
- Enables paging from a C-0920 or TE110
- Simple connections
- Quick and easy installation
- Volume level adjustment
- Screw terminals for easy connection
FAQ
Q: How can I obtain service during the warranty period?
A: To obtain service during the warranty period, please call 800-840-0288 toll-free and obtain a Return Authorization number in advance. The number should be marked on the outside of the shipping carton.
Q: What should I do if a problem occurs with the product after the
warranty period?
A: If a problem occurs with the product after the warranty period, please contact Channel Vision Technology, your dealer, or any factory-authorized service center for assistance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>