CHANNEL VISION A4623 Aria 4×6 Amplified AV System Instructions
- June 17, 2024
- Channel Vision
Table of Contents
CHANNEL VISION A4623 Aria 4×6 Amplified AV System Instructions
The A4623/A4623R is a 4 input 6 zone matrix A/V controller with an integrated amplifier designed for whole-house audio/video distribution. The unit provides both pre-amp outputs and speaker level outputs for each of the 6 zones making it easy to add a higher power amplifier for more demanding applications. Any of the 4 source inputs can be selected and routed to any of the 6 outputs (or zones) independent of the other zones.
Features:
- Built-in Amplifiers: 20Watts per channel
- Pre-amp outputs for adding more amplification
- Distributes 4 A/V sources to 6 different zones
- IR and Serial Control options
- Cost effective and easy to install
Dimensions do not include the rubber feet on the bottom of the unit or connectors which protrude from the rear of the unit. Rubber feet will add 0.5” to the height and connectors (without wires attached) will add 0.5” to the depth.
Accessories
(Sold Separately)
A0127 … IR repeating keypad. contains the IR codes necessary to operate the A4623, but you may also use a standard IR receiver or a 3rd party keypad. When using a simple IR receiver, you will need to use the A0505 remote control which contains the IR codes to control the A4623. These codes can be downloaded from www.channelvision.com, or learned from an A0501 remote control.
A0501, A0502, or A0505 … Remote control. Contains IR codes for controlling the A4623 as well as many other Channel Vision audio products. (A0501 shown).
IR-3001 & IR-3002 … Single and dual head IR flashers. Use one head per source to control from the remote room. (IR-3002 shown).
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions for future reference
- Heed all warnings.
- Follow all instructions.
- Do not use this device near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with these instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. When installing multiple amplifiers in the same rack, provide space for air circulation above and below each unit.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug, has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. the wide blade or the third prong are provided fro your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet..
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by Channel Vision.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
Warning: To reduce the risk of electric shock, do not remove the cover (or back), no user serviceable parts inside, refer servicing to qualified service personnel.
Note: at frequencies between 150kHz to 1GHz, any deterioration of the sound and picture is so minor that the system could still be used and will function normally.
Wiring the A0127 keypad…
Keypads connect to the A4623 through the RJ-45 jacks on the back panel of the
A4623 Connections to the A0127 may be accomplished either by using the RJ-45
jack or the screw terminals provided on the back side of the keypad. When
using the RJ-45 jacks, simply wire both ends of the cable according to the
TIA568A standard. When using the screw terminals on the A0127, make sure to
wire the RJ-45 plug connecting to the A4623 as shown below.
Connecting a standard IR repeater to the A4623… A standard IR repeating
device may be connected directly to the A4623 allowing the unit to be
controlled from a learning IR remote. The connection is similar to the wiring
configuration shown above for the A0127, except there are only three wires as
shown below.
Using the A0505 remote control…
The A0505 is designed to allow you to control your A4623 without having to
touch the buttons on the A0127. Simply point the A0501 remote control at the
IR sensor located at the bottom of the A0127 and press the desired button.
Downloading IR commands for the A4623…
If you don’t have access to the A0505 remote and you need to program a
learning remote, you can download the IR codes from the internet. IR codes
compatible with the Philips Pronto remote controls can be downloaded from the
following websites:
www.channelvision.com (Hex codes are also
available)
www.remotecentral.com
RS-232 Control Code:
For installations requiring more sophistication the A4623 supports RS-232 making it well suited for use with automation systems. Baud Rate: 19200, 8N1 (8Bit Data, No Parity, 1 Stop Bit) Each transmission = 8 ASCII bytes Check Sum = The sum of the first 7 bytes inverted and truncated
Note: the check sum for each command is included in the following charts. There are two possible responses generated when a command is received: ack – This acknowledges that the command was received and it had a valid check sum.
ZZZ – This means that the command was not understood or could not be decoded correctly. It could also mean that the check sum was not valid.
Serial Cable Pin Out
Zone 1 Commands
| Function | ASCII Command | Hex Command |
|---|---|---|
| Zone 1 Power Toggle | A46Z1PL- | 41 34 36 5A 31 50 4C 2D |
| All Power Toggle | A46Z1PA8 | 41 34 36 5A 31 50 41 38 |
| Zone 1, Select Source 1 | A46Z1S1E | 41 34 36 5A 31 53 31 45 |
| Zone 1, Select Source 2 | A46Z1S2D | 41 34 36 5A 31 53 32 44 |
| Zone 1, Select Source 3 | A46Z1S3C | 41 34 36 5A 31 53 33 43 |
| Zone 1, Select Source 4 | A46Z1S4B | 41 34 36 5A 31 53 34 42. |
| Zone 1, Volume Up | A46Z1V+H | 41 34 36 5A 31 56 2B 48 |
| Zone 1, Volume Down | A46Z1V-F | 41 34 36 5A 31 56 2D 46 |
| Zone 1, Volume Reset | A46Z1VC0 | 41 34 36 5A 31 56 43 30 |
| Zone 1, Mute | A46Z1MT+ | 41 34 36 5A 31 4D 54 28 |
| Zone 1, Request Status | A46Z1SF0 | 41 34 36 5A 31 53 46 30 |
| Zone 1, Status Clear | A46Z1SC3 | 41 34 36 5A 31 53 43 33 |
Zone 2 Commands
| Function | ASCII Command | Hex Command |
|---|---|---|
| Zone 2 Power Toggle | A46Z2PL’ | 41 34 36 5A 32 50 4C 2C |
| All Power Toggle | A46Z2PA7 | 41 34 36 5A 32 50 41 37 |
| Zone 2, Select Source 1 | A46Z2S1D | 41 34 36 5A 32 53 31 44 |
| Zone 2, Select Source 2 | A46Z2S2C | 41 34 36 5A 32 53 32 43 |
| Zone 2, Select Source 3 | A46Z2S3B | 41 34 36 5A 32 53 33 42 |
| Zone 2, Select Source 4 | A46Z2S4A | 41 34 36 5A 32 53 34 41 |
| Zone 2, Volume Up | A46Z2V+G | 41 34 36 5A 32 56 2B 47 |
| Zone 2, Volume Down | A46Z2V-E | 41 34 36 5A 32 56 2D 45 |
| Zone 2, Volume Reset | A46Z2VC/ | 41 34 36 5A 32 56 43 2F |
| Zone 2, Mute | A46Z2MT’ | 41 34 36 5A 32 4D 54 27 |
| Zone 2, Request Status | A46Z2SF/ | 41 34 36 5A 32 53 46 2F |
| Zone 2, Status Clear | A46Z2SC2 | 41 34 36 5A 32 53 43 32 |
Zone 3 Commands
| Function | ASCII Command | Hex Command |
|---|---|---|
| Zone 3 Power Toggle | A46Z3PL+ | 41 34 36 5A 33 50 4C 2B |
| All Power Toggle | A46Z3PA6 | 41 34 36 5A 33 50 41 36 |
| Zone 3, Select Source 1 | A46Z3S1C | 41 34 36 5A 33 53 31 43 |
| Zone 3, Select Source 2 | A46Z3S2B | 41 34 36 5A 33 53 32 42 |
| Zone 3, Select Source 3 | A46Z3S3A | 41 34 36 5A 33 53 33 41 |
| Zone 3, Select Source 4 | A46Z3S4@ | 41 34 36 5A 33 53 34 40 |
| Zone 3, Volume Up | A46Z3V+F | 41 34 36 5A 33 56 2B 46 |
| Zone 3, Volume Down | A46Z3V-D | 41 34 36 5A 33 56 2D 44 |
| Zone 3, Volume Reset | A46Z3VC. | 41 34 36 5A 33 56 43 2E |
| Zone 3, Mute | A46Z3MT& | 41 34 36 5A 33 4D 54 26 |
| Zone 3, Request Status | A46Z3SF. | 41 34 36 5A 33 53 46 2E |
| Zone 3, Status Clear | A46Z3SC1 | 41 34 36 5A 33 53 43 31 |
Zone 4 Commands
| Function | ASCII Command | Hex Command |
|---|---|---|
| Zone 4 Power Toggle | A46Z4PL* | 41 34 36 5A 34 50 4C 2A |
| All Power Toggle | A46Z4PA5 | 41 34 36 5A 34 50 41 35 |
| Zone 4, Select Source 1 | A46Z4S1B | 41 34 36 5A 34 53 31 42 |
| Zone 4, Select Source 2 | A46Z4S2A | 41 34 36 5A 34 53 32 41 |
| Zone 4, Select Source 3 | A46Z4S3@ | 41 34 36 5A 34 53 33 40 |
| Zone 4, Select Source 4 | A46Z4S4? | 41 34 36 5A 34 53 34 3F |
| Zone 4, Volume Up | A46Z4V+E | 41 34 36 5A 34 56 2B 45 |
| Zone 4, Volume Down | A46Z4V-C | 41 34 36 5A 34 56 2D 43 |
| Zone 4, Volume Reset | A46Z4VC- | 41 34 36 5A 34 56 43 2D |
| Zone 4, Mute | A46Z4MT% | 41 34 36 5A 34 4D 54 25 |
| Zone 4, Request Status | A46Z4SF- | 41 34 36 5A 34 53 46 2D |
| Zone 4, Status Clear | A46Z4SC0 | 41 34 36 5A 34 53 43 30 |
Zone 5 Commands
| Function | ASCII Command | Hex Command |
|---|---|---|
| Zone 5 Power Toggle | A46Z5PL) | 41 34 36 5A 35 50 4C 29 |
| All Power Toggle | A46Z5PA4 | 41 34 36 5A 35 50 41 34 |
| Zone 5, Select Source 1 | A46Z5S1A | 41 34 36 5A 35 53 31 41 |
| Zone 5, Select Source 2 | A46Z5S2@ | 41 34 36 5A 35 53 32 40 |
| Zone 5, Select Source 3 | A46Z5S3? | 41 34 36 5A 35 53 33 3F |
| Zone 5, Select Source 4 | A46Z5S4> | 41 34 36 5A 35 53 34 3E |
| Zone 5, Volume Up | A46Z5V+D | 41 34 36 5A 35 56 2B 44 |
| Zone 5, Volume Down | A46Z5V-B | 41 34 36 5A 35 56 2D 42 |
| Zone 5, Volume Reset | A46Z5VC’ | 41 34 36 5A 35 56 43 2C |
| Zone 5, Mute | A46Z5MT$ | 41 34 36 5A 35 4D 54 24 |
| Zone 5, Request Status | A46Z5SF’ | 41 34 36 5A 35 53 46 2C |
| Zone 5, Status Clear | A46Z5SC/ | 41 34 36 5A 35 53 43 2F |
Zone 6 Commands
| Function | ASCII Command | Hex Command |
|---|---|---|
| Zone 6 Power Toggle | A46Z6PL( | 41 34 36 5A 36 50 4C 28 |
| All Power Toggle | A46Z6PA3 | 41 34 36 5A 36 50 41 33 |
| Zone 6, Select Source 1 | A46Z6S1@ | 41 34 36 5A 36 53 31 40 |
| Zone 6, Select Source 2 | A46Z6S2? | 41 34 36 5A 36 53 32 3F |
| Zone 6, Select Source 3 | A46Z6S3> | 41 34 36 5A 36 53 33 3E |
| Zone 6, Select Source 4 | A46Z6S4= | 41 34 36 5A 36 53 34 3D |
| Zone 6, Volume Up | A46Z6V+C | 41 34 36 5A 36 56 2B 43 |
| Zone 6, Volume Down | A46Z6V-A | 41 34 36 5A 36 56 2D 41 |
| Zone 6, Volume Reset | A46Z6VC+ | 41 34 36 5A 36 56 43 2B |
| Zone 6, Mute | A46Z6MT# | 41 34 36 5A 36 4D 54 23 |
| Zone 6, Request Status | A46Z6SF+ | 41 34 36 5A 36 53 46 2B |
| Zone 6, Status Clear | A46Z6SC. | 41 34 36 5A 36 53 43 2E |
Global Commands
| Function | ASCII Command | Hex Command |
|---|---|---|
| Global, Zone Power Toggle | A46ZAPL[group sep] | 41 34 36 5A 41 50 4C 1D |
| Global, Select Source 1 | A46ZAS15 | 41 34 36 5A 41 53 31 35 |
| Global, Select Source 2 | A46ZAS24 | 41 34 36 5A 41 53 32 34 |
| Global, Select Source 3 | A46ZAS33 | 41 34 36 5A 41 53 33 33 |
| Global, Select Source 4 | A46ZAS42 | 41 34 36 5A 41 53 34 32 |
| Global, Volume Up | A46ZAV+8 | 41 34 36 5A 41 56 2B 38 |
| Global, Volume Down | A46ZAV-6 | 41 34 36 5A 41 56 2D 36 |
| Global, Volume Reset | A46ZAVC[sp] | 41 34 36 5A 41 56 43 20 |
| Global, Mute | A46ZAMT[cancel] | 41 34 36 5A 41 4D 54 18 |
| Global, Request Status | A46ZASF[sp] | 41 34 36 5A 41 53 46 20 |
| Global, Status Clear | A46ZASC# | 41 34 36 5A 41 53 43 23 |
1 YEAR LIMITED WARRANTY
Channel Vision Technology will repair or replace any defect in material or workmanship which occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for two years from the date of original purchase. This is a no hassle warranty with no mail in warranty card needed. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended only to the original purchaser, and a purchase receipt, invoice, or other proof of original purchase date will be required before warranty repairs are provided.
Mail in service can be obtained during the warranty period by calling 714-424-6500. A Return Authorization number must be obtained in advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other rights (which vary from state to state). If a problem with this product develops during or after the warranty period, please contact Channel Vision Technology, your dealer or any factory-authorized service center.
Specifications: (typical @25º C)
Audio
Bandwidth: 20-20kHz +/- 3dB
Power Output: 20W per channel
S/N ratio: >80dB
THD: < 0.5%
Video
Bandwidth: DC-20MHz
Crosstalk: -60 dB
Specifications subject to change without notice
www.channelvision.com
234 Fischer Avenue, Costa Mesa, California 92626 USA
(714)424-6500
(800)840-0288
(714)424-6510 fax
email:
techsupport@channelvision.com
