CHANNEL VISION CVT-2-8WB Out Amplified Splitter Instructions
- June 13, 2024
- Channel Vision
Table of Contents
CHANNEL VISION CVT-2-8WB Out Amplified Splitter
Product Information
- The CVT-2/8WB and C-0333 are 8-output amplified splitters with a built-in combiner for modulated signals.
- They are designed for use in Standard and wide-band CATV Systems.
- The CVT-2/8WB is designed to mount directly on any flat surface, while the C-0333 can snap directly into a structured wiring enclosure.
Features:
- 8 Amplified outputs: 4.5dB Gain
- Amplified return path from 5-42MHz
- Compatible with Advanced Wide Bandwidth Digital CATV systems
- Supports 1 modulator input
- Allows IR pass through on the modulator input port
- Easy installation
Product Usage Instructions
Basic Amplified Splitter Application
- Connect the CVT-2/8WB at the main distribution point in the house.
- Connect the antenna or cable service feed to the “CABLE IN” port.
- Connect up to 8 TVs to the “TV OUTPUTS” ports.
- Terminate any unused outputs with the included 75 ohm terminators.
- Connect the power supply to the “POWER IN” port.
Large System Amplified Splitter Application
- Connect the CVT-2/8WB (Master) at the main distribution point.
- Connect the antenna or cable service feed to the “CABLE IN” port of the CVT-2/8WB (Master).
- Connect up to 8 TVs to the “TV OUTPUTS” ports of the CVT-2/8WB (Master).
- Terminate any unused outputs with the included 75 ohm terminators.
- Connect additional CVT-2/8WBs (Slaves) to the outputs of the CVT-2/8WB (Master) to achieve more than 8 outputs.
- For runs of 150′ or less, use one of the Master outputs.
- For runs between 150-250′, use one of the Slave outputs.
- Connect the power supply to each CVT-2/8WB.
Note: Please refer to the user manual for additional information
- The CVT-2/8WB and C-0333 are 8-output amplified splitters with a built-in combiner for modulated signals.
- They allow IR signals to pass through the modulator input to the TV outputs, making it a perfect match for the E2200IR, E3200IR or E4200IR.
- The CVT-2/8WB is designed to mount directly on any flat surface, while the C-0333 can snap directly into a structured wiring enclosure.
Features
- 8 Amplified outputs: 4.5dB Gain
- Amplified return path from 5-42MHz
- Compatible with Advanced Wide Bandwidth Digital CATV systems
- Supports 1 modulator input
- Allows IR pass through on the modulator input port
- Easy installation
Accessories Included: Power Supply
75-ohm Terminators
Basic Amplified Splitter Application
- Connect the CVT-2/8WB as shown and locate it at the main distribution point in the house. The CVT-2/8WB will supply the amplified TV signal to 8 TV locations.
Large System Amplified Splitter Application
The CVT-2/8WB can be cascaded for situations that require more than 8 outputs.
Each of the 8 outputs of the CVT-2/8WB can feed the input of an additional
CVT-2/8WB creating a system with 64 TV outputs.
Cascaded Application with IR Control
The IR engine built into the E2200IR, E3200IR, and E4200IR can support up to 8
TV locations with IR receivers. Note: any TV location that does not have IR
receiver needs to be DC blocked using model 3109.
Using the CVT-2/8WB with the Affinity (P-0321)
The CVT-2/8WB can be integrated with the P-0321 to send modulated signals
through a system that has some TVs with digital cable boxes and some TVs
without digital cable boxes. An RF filter can be used to remove the digital
content from the TVs which do not have digital boxes. This allows modulated
channels to be inserted without interference problems. The P-0321 preserves
the digital content for the locations that do have digital boxes. Additional
details regarding the operation of the Affinity model P-0321 can be found in
its installation manual.
Specifications
(typical @25° C)
| ITEM | MIN. | TYP. | MAX. |
|---|
MODULATOR PATH
Operation Time| Full-Time Bypass
Insertion Loss| <20dB (15dB typ.)
Return Loss (I/O)| >14dB
IR PASS| Yes
CATV FORWARD PATH
Frequency Range| 54-860 / 975-1525MHz
Gain| | 54-800MHz
800-860MHz
975-1525MHz
| 5.0dB| 6.0dB| 7.0dB
4.0dB| 5.0dB| 6.0dB
-14dB| -17dB| -20dB
Flatness| +1.0dB
Return Loss (I/O)| >14dB
Isolation| >18dB
Noise Figure@70 degrees F| 7.5dB
Group Delay (54 to 66MHz)| 60ns
Group Delay (66 to 88MHz)| 22ns
Group Delay (88 to 1000MHz)| 12ns
Composite Second-Order Distortions| 64dBC
Composite Triple Beat Distortions| 74dBC
Cross Modulation Distortions| 60dBC
Second Hum Modulation| 60dBC
Rated Output Level @160 channels, 6MHz each| +23.0 dBmV
Power Consumption| 180mA
CATV RETURN PATH
Frequency Range| 5-42MHz
5-40MHz
40-42MHz
| -1.0dB| 0dB| 1.0dB
-1.5dB| -1.0dB| 0dB
Flatness| +1.0dB
Return Loss (I/O)| >14dB
Isolation| >20dB
Noise Figure@70 degrees F| 20dB
Group Delay (5 to 10MHz / 36MHz to 42MHz)| 55ns
Group Delay (10 to 36MHz)| 36ns
Composite Second-Order Distortions| 53dBC
Composite Triple Beat Distortions| 56dBC
Cross Modulation Distortions| 56dBC
Second Hum Modulation| 58dBC
Rated Output Level @2 channels, 6MHz each| +43.0 dBmV
Power Consumption| 65mA
GENERAL SPEC
RFI Shielding| >110dB
Nominal Impedance| “F” Female| | 75 ohm
Supply Voltage (DC)| 12-15VDC
1-Year Limited Warranty
- Channel Vision Technology will repair or replace any defect in material or workmanship that occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for one year from the date of original purchase. This is a no-hassle warranty with no mail-in warranty card needed. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended only to the original purchaser, and a purchase receipt, invoice, or other proof of the original purchase date will be required before warranty repairs are provided.
- Mail-in service can be obtained during the warranty period by calling 800-840-0288 toll-free. A Return Authorization number must be obtained in advance and can be marked on the outside of the shipping carton.
- This warranty gives you specific legal rights and you may have other rights (which vary from state to state). If a problem with this product develops during or after the warranty period, please contact Channel Vision Technology, your dealer or any factory-authorized service centre.
- Channel Vision products are not intended for use in medical, lifesaving, life-sustaining or critical environment applications.
- Channel Vision customers using or selling Channel Vision products for use in such applications do so at their own risk and agree to fully indemnify Channel Vision for any damages resulting from such improper use or sale.
- www.channelvision.com
- 234 Fischer Avenue, Costa Mesa, California 92626 USA (714)424-6500
- (800)840-0288
- (714)424-6510 fax
- email: [email protected]
Documents / Resources
|
CHANNEL VISION CVT-2-8WB Out Amplified
Splitter
[pdf] Instructions
CVT-2-8WB Out Amplified Splitter, CVT-2-8WB, Out Amplified Splitter, Amplified
Splitter, Splitter
---|---