CHANNEL VISION LCR527 5.25 Inch In Wall Left Center Right Speaker Instructions
- June 17, 2024
- Channel Vision
Table of Contents
**CHANNEL VISION LCR527 5.25 Inch In Wall Left Center Right Speaker Instructions
**
Channel Vision Technology will repair or replace any defect in material or workmanship which occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for ten years from the date of original purchase. This is a no hassle warranty with no mail in warranty card needed. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended only to the original purchaser, and a purchase receipt, invoice, or other proof of original purchase date will be required before warranty repairs are provided.
Mail in service can be obtained during the warranty period by calling 800-840-0288 toll free. A Return Authorization number must be obtained in advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other rights (which vary from state to state). If a problem with this product develops during or after the warranty period, please contact Channel Vision Technology, your dealer or any factory-authorized service center.
Installation:
- Use the included template to mark and cut a hole in the drywall.
- We recommend wiring with AWG 16 or larger, stranded wire.
- For proper phasing, all speakers in the system must be wired alike. Connect red wires to red terminals on speaker and to red or plus terminals on amplifier.
- Install LCR527 in the hole. Tighten the mounting screws. The mounting dog ears will rotate outward and grip the drywall.
- Aim tweeter
Features:
High power handling capacity Dual 5.25” polypropylene woofers with butyl
rubber surrounds 0.75” pivoting silk dome tweeter 8º Angled housing Gold
speaker terminals accept 14AWG wire Small perforated designer grille Mounting
template and paint shield included
Recommended power: 20W to 100W
Specifications:
- Frequency range: 60Hz – 20kHz ± 3dB
- Sensitivity: 89dB (1W/1m)
- Impedance: 8ohm – 4ohm switchable
- Power Handling: 100-Watts Peak
- Drivers: 1- .75” Silk Dome tweeter 2- 5.25” polypropylene woofer
- Impedance: 8 ohms
- Finish: ABS plastic
Dimensions
- Speaker: 9.51”H x 13.0”W x 3.86”D (Depth from surface of wall board)
- Hole: 8.4”H x 11.75”W
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>