CHAUVET DJ EZlink Par Q4 BT RGBA Wireless Par with Bluetooth User Manual

June 17, 2024
Chauvet DJ

CHAUVET DJ EZlink Par Q4 BT RGBA Wireless Par with Bluetooth

Before You Begin

What Is Included

  • EZLinkParQ4BT
  • Power cord
  • Quick Reference Guide

Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.

Claims

If the box or the contents (the product and included accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
< ENTER> A key to be pressed on the product’s control panel
ON A value to be entered or selected

Symbols

Symbol Meaning
**** Electrical warning. Not following these instructions may cause

electrical damage to the product, accessories, or the user.
| Critical installation, configuration, or operation information. Not following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
| Important installation or configuration information. The product may not function correctly if this information is not used.
****| Useful information.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make and does not commit to make any such revisions. Download the latest version from www.chauvetdj.com.
Intellectual Property

The works of authorship contained in this manual, including, but not limited to, all design, text and images are owned by Chauvet.
© Copyright 2019 Chauvet & Sons, LLC. All rights reserved. Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and EZLink Par Q4BT are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.

Safety Notes

  • This product is not intended for permanent installation.
  • Always connect the product to a grounded circuit to avoid the risk of electrocution.
  • Always disconnect the product from the power source before cleaning or replacing the fuse.
  • Avoid direct eye exposure to the light source while the product is on.
  • Make sure the power cord is not crimped or damaged.
  • Never disconnect the product from power by pulling or tugging on the cord.
  • Make sure there are no flammable materials close to the product when operating.
  • Do not touch the product’s housing when operating because it may be very hot.
  • The voltage of the outlet to which you are connecting this product must be within the range stated on the decal or rear panel of the product.
  • The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
  • Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
  • Be sure that no ventilation slots on the product’s housing are blocked.
  • Never connect the product to a dimmer or rheostat.
  • Make sure to replace the fuse with another of the same type and rating.
  • Never carry the product from the power cord or any moving part.
  • The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher temperatures.
  • In the event of a serious operating problem, stop using the product immediately.
  • Do not open this product. It contains no user-serviceable parts.
  • To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via a breaker or by unplugging it.

Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document.

Introduction

Product Overview

CHAUVET-DJ-EZlink-Par-Q4-BT-RGBA-Wireless-Par-with-Bluetooth-
fig-4

Product Dimensions

CHAUVET-DJ-EZlink-Par-Q4-BT-RGBA-Wireless-Par-with-Bluetooth-
fig-5

Setup

AC Power

The EZLink Par Q4BT has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via a breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

Fuse Replacement

  1. Disconnect the product from power.
  2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
  3. Pry the fuse holder out of the housing.
  4. Remove the blown fuse from the holder and replace it with a fuse of the same type and rating.
  5. Insert the fuse holder back in place and reconnect power.

Disconnect the product from the power outlet before replacing the fuse.

Power Linking

The product provides power linking via the outlets located in the back of the product. See the diagram below for further explanation.

Power-Linking Diagram

  • You can power link up to 27 EZLink Par Q4BT products on 120 VAC or up to 50 EZLink Par Q4BT products on 230 VAC.
  • The power linking diagram shown above corresponds to the North American version of the product ONLY! If using the product in other markets, you must consult with the local Chauvet distributor as power linking connectors and requirements may differ in your country or region.

Battery Power

The EZLink Par Q4BT comes with a rechargeable lithium battery for cable-free operation.

Charging the Battery

The battery charges whenever the EZLink Par Q4BT is plugged into the external charger and the charger is plugged into a power source. If the product is plugged in and not in operation, make sure the product is turned off.

CHAUVET-DJ-EZlink-Par-Q4-BT-RGBA-Wireless-Par-with-Bluetooth-
fig-8

Operation

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Please refer to the Product Overview to see the button locations on the control panel

Button Function
< MENU> Press to find an operation mode or to b3ack out of the current

menu option
< UP>| Press to scroll up the list of options or to increase the numeric value in a function
< DOWN>| Press to scroll down the list of options or to decrease the numeric value in a function
< ENTER>| Press to activate a menu option or set the selected value in a function

Menu Map

Mode Programming Levels Description
DMX Mode 4Ch d 1–509
8Ch 8-channel DMX mode
Static Colors C- C 1–15
Automatic Programs P- P 1–5
Auto Speed S- S. 1–100

to fast
Dimmer| d- | L. 1–255| Dimmer for the Auto/Sound programs
Sound- Active Mode| Snd| Snd1–5| Sound-active programs
Sensitivity| SEnS| u 0–u100| Sound sensitivity



Custom Color Mixing

| ****

u-

| r. 0–255| ****

Custom static colours combine red, green, blue, and amber

G. 0–255
b. 0–255
A. 0–255
S. 0–100| Strobe rate
**Bluetooth Mode*| bLE| _**| Bluetooth control mode displays Bluetooth ID


Control Mode

| ****

SEt

| ir| on| Turns infrared on or off
oFF
out| SLAV| Enables Master/Slave with other BT products
dMX| Enables Master/Slave with non-BT products

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Chauvet & Sons, LLC is under license. Other trademarks and trade names are those of their respective owners.
Configuration (DMX)
The EZLink Par Q4BT works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website:
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.

Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If the starting address is set too high, access to some of the product’s channels could be restricted.
The EZLink Par Q4BT uses up to 8 DMX channels, which defines the highest configurable address is 505. For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:

  1. Press repeatedly until 4Ch or 8Ch shows on the display.
  2. Press .
  3. Use or to select the starting address, from d 1–509 (4Ch) or d 1–505 (8Ch).
  4. Press .

DMX Personalities

The EZLink Par Q4BT has two DMX personalities: a 4-channel personality and an 8-channel personality. To select a DMX personality, follow the instructions below.

  1. Press to view menu options on the display.
  2. Use or to select the DMX personality, from 4Ch or 8Ch.
  3. Press .

DMX Channel Assignments and Values

8Ch

Channel Function Value Percent/Setting
1 Red 000 ó 255 0–100%
2 Green 000 ó 255 0–100%
3 Blue 000 ó 255 0–100%
4 Amber 000 ó 255 0–100%
5 Strobe 000 ó 015 No Function
016 ó 255 Strobe, slow to fast


6

| ****


Auto Programs

| 000 ó 005| No function
006 ó 055| Auto program 1 (programs 2–7)
056 ó 106| Auto program 2
107 ó 157| Auto program 3
158 ó 208| Auto program 4
209 ó 255| Auto program 5
7| Auto Speed| 000 ó 250| Program speed, slow to fast
251 ó 255| Sound-active program
8| Dimmer| 000 ó 255| 0–100%

4Ch

Channel Function Value Percent/Setting
1 Red 000 ó 255 0–100%
2 Green 000 ó 255 0–100%
3 Blue 000 ó 255 0–100%
4 Amber 000 ó 255 0–100%

Configuration (Bluetooth)
The EZLink Par Q4BT can be operated with the BTAir application over a Bluetooth connection (Bluetooth version 4.2):

  1. Download and install the BTAir app from your preferred app store.
  2. Press repeatedly until bLE shows on the display.
  3. Press .

The app will find and pair automatically to all the BT series products within the range.

Configuration (Standalone)

Set the product in one of the standalone modes to control without a DMX controller.

Never connect a product that is operating in any standalone mode to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.

Automatic Programs

To run the EZLink Par Q4BT in automatic mode, follow the instructions below:

  1. Press repeatedly until P– shows on the display.
  2. Press .
  3. Use or to select an automatic program, from P 1–5.
  4. Press .

Auto-Program Speed

To set the auto-program speed on the EZLink Par Q4BT, do the following:

  1. Press repeatedly until S– shows on the display.
  2. Use or to increase or decrease the program speed, from S. 1–100.
  3. Press . The product will return to Auto mode.

Sound-Active Mode
To run the EZLink Par Q4BT in sound-active mode, follow the instructions below:

  1. Press repeatedly until Snd shows on the display.
  2. Press .
  3. Use or to select a sound-active program, from Snd1–5.
  4. Press .

The product will only respond to low frequencies of music (bass and drums).

Preset Color Mode

To run the EZLink Par Q4BT on a preset static colour, do the following:

  1. Press repeatedly until C– shows on the display.
  2. Press .
  3. Use or to select a static color, from C 1–15.
  4. Press .

Custom Color Mixing

To mix a custom static colour on the EZLink Par Q4BT, do the following:

  1. Press repeatedly until u– shows on the display.
  2. Press and one of the following will show on the display:
  3. r. _ (red)
  4. G. _ (green)
  5. b. _ (blue)
  6. A. _ (amber)
  7. S. _(strobe rate)
  8. Press to cycle through the options.
  9. Use or to increase or decrease the selected value, from 0–255 (for red, green, blue, or amber) or from 0–100 (for strobe rate).
  10. Strobe rate – 0: no function, 1–99: slow to fast, 100: sound-active.
  11. Repeat steps 3 and 4 until the colour is set as desired.

IRC-6 Infrared Remote Control

The EZLink Par Q4BT is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode, follow the instructions below:

  1. Press repeatedly until SEt shows on the display.
  2. Press .
  3. Use or to select it.
  4. Press .
  5. Use or to select one.
  6. Press .

IRC-6 Operation

Automatic Mode

Automatic mode will enable you to run the automatic programs on the product. To turn on Automatic mode (snap) with the IRC-6:

To turn on Automatic mode (snap) with the IRC-6:

  1. Press on the IRC-6.
  2. Press <+> or <–> to choose between the different auto programs

To select only fading programs:

  1. Press on the IRC-6.
  2. Press <+> or <–> to choose between the different fading programs

To adjust the speed of the automatic program:

  1. Press on the IRC-6.
  2. Press <+> or <–> to increase or decrease the speed of the program

Sound-Active Mode

To turn on Sound-Active mode with the IRC-6:

  1. Press on the IRC-6.
  2. Press <+> or <–> to select a sound-active program.

To adjust the sound sensitivity:

  1. Press on the IRC-6.
  2. Press <+> or <–> to increase or decrease the sensitive

Manual Color Control

To select a preset static colour with the IRC-6:

  1. Press on the IRC-6.
  2. Press any number between 0–9 to choose your colour

To manually control the RGB percentage with the IRC-6:

  1. Press on the IRC-6.
  2. Select the colour to be edited, from (red), (green), (blue), or (amber).
  3. Press <+> or <–> to increase or decrease the value of the selected colour.
  4. Repeat steps 2 and 3 until the product outputs as desired.

Strobe
To adjust the strobe rate with the IRC-6:

  1. Press on the IRC-6.
  2. Press <+> or <–> to increase or decrease the strobe rate.
  3. Press again to turn off the strobe

Dimmer
To adjust the total output with the IRC-6:

  1. Press <%> on the IRC-6.
  2. Press <+> or <–> to increase or decrease the output level.

Black Out
To black out the lights with the IRC-6:

  1. Press on the IRC-6. This will turn off all the lights until the button is pressed again. The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is pressed, try pressing Master/Slave

Mode

The Master/Slave mode allows a single EZLink Par Q4BT product (the “master”) to control the actions of one or more EZLink Par Q4BT products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in standalone or with the IRC-6, while the slave products will be set to operate in slave mode. Once set and connected, the slave products will operate in unison with the master product. Configure the products as indicated below.

Slave products:

  1. Press repeatedly until 4Ch shows on the display.
  2. Press .
  3. Set the DMX address to d 1.
  4. Connect the DMX input of the first slave product to the DMX output of the master product.
  5. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave product.
  6. Finish setting and connecting all the slave products.

Master product:

  1. Press repeatedly until SEt shows on the display.
  2. Press .
  3. Use or to select out.
  4. Press .
  5. Press or to select dMX (to Master/Slave with non-BT products) or SLAV (to Master/Slave with other BT products).
  6. Press .
  7. Set the master product to operate in standalone or IR mode.
  8. Make the master product the first product in the DMX daisy chain.
    • Configure all the slave products before connecting the master to the daisy chain.
    • Never connect a DMX controller to a DMX string configured for Master/Slave operation because the controller may interfere with the signals from the master.
    • Do not connect more than 31 slaves to the master.

Maintenance

Product Maintenance

Dust build-up reduces light output performance and can cause overheating. This can lead to a reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency. To clean the product, follow the instructions below:

  1. Unplug the product from power.
  2. Wait until the product is at room temperature.
  3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
  4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
  5. Apply the solution directly to a soft, lint-free cotton cloth or a lens-cleaning tissue.
  6. Softly drag any dirt or grime to the outside of the transparent surface.
  7. Gently polish the transparent surfaces until they are free of haze and lint.

Always dry the transparent surfaces carefully after cleaning them.
Do not spin the cooling fans using compressed air because they could be damaged.

Technical Specifications

Dimensions and Weight|
---|---
Length| Width| Height| Weight
5.7 in (145 mm)| 5.7 in (145 mm)| 5.6 in (143 mm)| 2.8 lb (1.3 kg)
Note : Dimensions in inches rounded to the nearest decimal digit.

Power

Power Supply Type| Range| Voltage Selection
Switching (internal)| 100 to 240 VAC, 50/60 Hz| Auto-ranging
Parameter| 120 V, 60 Hz| 230 V, 50 Hz
Consumption| 26 W| 24 W
Operating current| 0.3 A| 0.2 A
Fuse| F 1 A, 250 V| F 1 A, 250 V
Power I/O| U.S./Worldwide| UK/Europe
Power input connector| IEC| IEC
Power cord plug| Edison (U.S.)| Local plug

Returns
In case you need to get support or return a product:

Call the corresponding Chauvet Technical Support office and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause of the return.
To submit a service request online, go to www.chauvetdj.com/service- request. Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet will not issue call tags. Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA number.

Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.

Before sending the product, clearly write the following information on a piece of paper and place it inside the box

  • Your name
  • Your address
  • Your phone number
  • RMA number
  • A brief description of the problem

Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double- boxing are recommended.

Chauvet reserves the right to use its discretion to repair or replace the returned product(s).

Contact Us

General Information

Technical Support

Chauvet Europe Ltd

  • Address: Unit 1C Email:
  • Brookhill Road Industrial Estate
  • Pinxton, Nottingham, UK
  • NG16 6NT
  • Voice : +44 (0) 1773 511115
  • Fax: +44 (0) 1773 511110

Technical Support

Chauvet Europe BVBA

  • Address: Stokstraat 18 9770 Kruishoutem Belgium
  • Voice: +32 9 388 93 97

Technical Support

Chauvet France

  • Address: 3, Rue Ampère 91380 Chilly-Mazarin France
  • Voice: +33 1 78 85 33 59

Technical Support

Chauvet Germany

  • Address : Bruno-Bürgel-Str. 11 28759 Bremen Germany
  • Voice: +49 421 62 60 20

Technical Support

Chauvet Mexico

  • Address : Av. de las Partidas 34 – 3B (Entrance by Calle 2)
  • Zona Industrial Lerma
  • Lerma, Edo. de México, CP 52000
  • Voice : +52 728-690-2010

Technical Support

Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., United Kingdom, Ireland, Benelux, France, Germany, or Mexico, contact the dealer of the record.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Chauvet DJ User Manuals

Related Manuals