CHAUVET DJ Cumulus Professional Low lying Fog Machine User Manual
- June 17, 2024
- Chauvet DJ
Table of Contents
CHAUVET DJ Cumulus Professional Low lying Fog Machine
BEFORE YOU BEGIN
What Is Included
- Cumulus
- Overflow Tubing
- Hose and Square Holder
- Power Cord
- Warranty Card
- Quick Reference Guide
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure
all the parts are in the package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear
damaged from shipping, or show signs of mishandling, notify the carrier
immediately, not Chauvet. Failure to report damage to the carrier immediately
may invalidate your claim. In addition, keep the box and contents for
inspection.
For other issues, such as missing components or parts, damage not related to
shipping, or concealed damage, file a claim with Chauvet within 7 days of
delivery.
Text Conventions
C ONVENTION | M EANING |
---|---|
1–512 | A range of values |
50/60 | A set of values of which only one can be chosen |
Settings | A menu option not to be modified |
< ENTER> | A key to be pressed on the product’s control panel |
ON | A value to be entered or selected |
Symbols
Disclaimer
Chauvet believes that the information contained in this manual is accurate in
all respects. However, Chauvet assumes no responsibility and specifically
disclaims any and all liability to any party for any loss, damage or
disruption caused by any errors or omissions in this document, whether such
errors or omissions result from negligence, accident or any other cause.
Chauvet reserves the right to revise the content of this document without any
obligation to notify any person or company of such revision, however, Chauvet
has no obligation to make, and does not commit to make, any such revisions.
Download the latest version from www.chauvetdj.com.
The works of authorship contained in this manual, including, but not limited
to, all design, text and images are owned by Chauvet.
© Copyright 2018 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo, and Cumulus are registered trademarks or trademarks
of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United
States and other countries. Other company and product names and logos referred
to herein may be trademarks of their respective companies.
Product at a Glance
Use on Dimmer | Ø |
---|---|
Outdoor Use | Ø |
Sound-Active | Ø |
DMX | √ |
Master/Slave | Ø |
Auto Programs | Ø |
--- | --- |
Auto-ranging Power Supply | Ø |
Breaker | √ |
User-Serviceable | Ø |
Safety Notes
- Not intended for permanent installations.
- Always connect the product to a grounded circuit to avoid the risk of electrocution.
- Make sure the power cord is not crimped or damaged.
- Never disconnect the power cord by pulling or tugging on the cord.
- Make sure there are no flammable materials close to the unit while operating
- Do not touch the output nozzle on this product. It is very hot during operation and it may remain hot for several hours after turning the unit off.
- Do not drink the haze fluid. If you do, call your local emergency service (911 in the US) for help.
WARNING
- Do not add perfume, alcohol, gasoline, or any other flammables to the haze fluid.
- Depending on the amount of haze generated, all haze machines may set off smoke detectors.
- Do not use it for space heating purposes.
- Use only CHAUVET DJ water-based haze fluid.
- Drain the tank before transporting the product.
- Condensation may form on the bottom of the product, creating damp conditions under and around the Cumulus. Use caution! Surfaces around the product may become slippery.
- Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated in the decal or rear panel of the product.
- This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to rain or moisture.
- Always install this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
- Be sure that no ventilation slots on the unit’s housing are blocked.
- Never connect this product to a dimmer or rheostat.
INFO
- Never carry the product from the power cord or any moving part. Always use the hanging/mounting bracket.
- The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate this product at higher temperatures.
- In the event of a serious operating problem, stop using the product immediately.
- Never try to repair this product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via a breaker or by unplugging it.
Keep this User Manual for future use. If you sell the product, be sure that the purchaser receives this document.
INTRODUCTION
Product Overview
Product Dimensions
SETUP
AC Power
The Cumulus has a fixed voltage power supply and it can work with an input
voltage of either 120 VAC, 60 Hz or 230 VAC, 50 Hz, depending on the specific
model.
- WARNING: To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
- INGO: While operating the Cumulus, make sure there is adequate haze fluid in the machine to prevent pump and heater damage. When the haze fluid level becomes low, simply add more haze fluid to continue using the Cumulus.
- WARNING: This product may NOT be tilted. This product should be level when on a surface.
Resetting the Breaker
This product is equipped with a resettable circuit breaker. If the breaker
trips, all sections of this product will lose power.
- Remove the power cord from mains power.
- Allow unit to cool for 15 minutes.
- After 15 minutes, you may attempt to reset the breaker by pressing the button with your finger.
- Plug the product’s power cord into the power outlet and continue using as recommended.
OPERATION
Control Priority
The Cumulus operates according to the following priority control levels:
Control Panel Operation
To access the control panel functions, use the four buttons located underneath
the display, and the two manual control knobs located to the right of the
display. Please refer to the Product Overview to see the button and knob
locations on the control panel.
Control Panel Description
BUTTON/KNOB | FUNCTION |
---|---|
< MENU> | Exits from the current menu or function |
< UP/TIMER> | UP navigates upwards through the menu list and |
increases the numeric value when in a function.
TIMER starts the timer controlled operation
< DOWN/ VOLUME>| DOWN navigates downwards through the menu list and decreases the numeric value when in a function.
VOLUME triggers the pump to modify the output volume
< ENTER/ **STOP >| ENTER** enables the currently displayed menu or sets the currently selected value into the selected function.
STOP turns the fog output off.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the
main level and a variable number of programming levels for each option.
- To go to the desired main level, press
repeatedly until the option shows on the display. This will take you to the first programming level for that option. - To select an option or value within the current programming level, press
or until the option shows on the display. If there is another programming level, you will see that first option, or you will see the selected value. - Press
repeatedly to exit to the previous main level.
Operation
- Place the machine on a level surface. Plug the power cord into the wall.
- Remove the top lid.
- Fill the water tank with distilled water to the maximum fill line located on the inside of the tank. The container can hold up to 2 gal or (7.6 l).
- Fill the fluid tank with CHAUVET haze or fog fluid to the maximum fill line located on the outside of the tank. The container can hold up to 1 gal (3.8 l).
- Turn the product on using the power switch on the back panel. Make sure the fans are operating properly.
- Using the control panel, set the product to the desired operating mode.
- Due to water evaporation, you may need to refill the Cumulus with water to continue triggering the machine.
- The Cumulus is fitted with a safety shutoff feature, which prevents the unit’s heaters from turning on when the water level is too low. If this safety shutoff feature has been engaged, simply add more water to continue using the Cumulus.
INFO: The Cumulus can operate with the top lid on or off.
Menu Map
MODE | PROGRAMMING LEVELS | DESCRIPTION |
---|---|---|
Interval Set | 5–200 | Sets the interval between fog output |
Duration Set | 5–200 | Sets the duration of the fog output |
Timer Out | 1- 100% | Sets the output volume in timer mode |
Volume Out | 1–100% | Fog volume 1–100% |
Fan Speed | 1–100% | Fan Speed (slow to fast) |
Fluid Sensor | ON/OFF | Turns the fluid sensor ON or OFF |
DMX 512 | 1–512 | Selects the DMX starting address |
Direct Timer | ON/OFF | Enables/disables the timer |
- If the product is turned off while in timer mode, the product will still be when the product is turned back on.
- WARNING: Ensure both valves are closed before filling the product with fluids.
- WARNING: Condensation may form on the bottom of the product, creating damp conditions under and around the Cumulus. Use caution! Surfaces around the product may become slippery.
DMX Linking
The Cumulus can work with a DMX controller. Instructions for connecting and
configuring this product for DMX operation are in the User Manual. If you are
not familiar with DMX, download the DMX Primer from
www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in DMX mode, the highest
recommended DMX address is 511.
INFO: Allow the Cumulus three minutes to heat up before continuing.
DMX Values
2-CH
CHANNEL | FUNCTION | VALUE | PERCENT/SETTING |
---|
1
| ****
Fan Speed
| 000 010| No function
011 512| 1–100%
2
| ****
Fog Output
| 000 010| No function
011 512| 1–100%
MAINTENANCE AND STORAGE
Hazer Maintenance
Do not allow the fogger to become clogged. After every 40 hours of continuous
operation, use the CHAUVET Fog Cleaner Quart (FCQ) through the system to
prevent the accumulation of particulate matter in the heating element.
The recommended cleaning procedure is as follows.
- Unplug the product from power.
- Empty all fog fluid from the machine.
- Add cleaning solution to the tank.
- Connect the product to power and allow it to warm up.
- Run the unit in a well-ventilated area until the tank is almost empty. Do not allow the pump to run dry.
- Refill with fog fluid to continue using the fogger. Run the machine briefly to clear any remaining cleaning solution from the pump and heater.
INFO: Never operate the machine without fluid.
Fog Cleaner Quart (FCQ) was specifically developed by Chauvet to clean your
Cumulus. Make sure you use FCQ regularly, no longer than 90 days between
cleanings, to increase the life of your product.
INFO: Test-run your Cumulus monthly to achieve the best performance.
Storage
Before storing the fogger, run FCQ through the system as described in the
cleaning procedure above; however, only follow steps 1 through 5. Do not
refill the tank with fog fluid if storing the fogger. Cleaning the system
before storage will help prevent any particles from condensing inside the pump
or heater while not in use.
TECHNICAL SPECIFICATIONS
RETURNS
In case you need to get support or return a product:
- If you are located in the U.S., contact Chauvet World Headquarters.
- If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
- If you are located in Mexico, contact Chauvet Mexico.
- If you are located in Benelux, contact Chauvet Europe BVBA.
- If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local distributor. See www.chauvetdj.com for distributors outside the U.S., UK, Ireland, Mexico, or Benelux.
If you are located outside the U.S., UK, Ireland, Mexico, or Benelux, contact your distributor of record and follow their instructions on how to return Chauvet products to them. Visit our website www.chauvetdj.com for contact details.
- Call the corresponding Chauvet Technical Support office and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause for the return.
- Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet will not issue call tags.
- Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.
Before sending the product, write the following information on a piece of paper and place it inside the box:
- Your name
- Your address
- Your phone number
- RMA number
- A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from
inadequate packaging will be your responsibility. FedEx packing or double-
boxing are recommended.
Chauvet reserves the right to use its discretion to repair or replace returned
product(s).
FAQ
Frequently Asked Questions
- Q: How often should I clean the haze generator?
- A: It is recommended to clean the haze generator after every 20 hours of cumulative use or as needed if performance issues are observed.
- Q: Can I use a different brand of haze fluid with the Cumulus?
- A: It is recommended to use Chauvet-approved haze fluid to ensure optimal performance and avoid any potential damage to the unit. The use of unauthorized fluids may void the warranty.
- Q: What is the warranty period for the Cumulus?
- A: The warranty period for the Cumulus is [Insert Warranty Period]. Please refer to the warranty documentation for more details.
CONTACT US
World Headquarters
- General Information
- Address: 5200 NW 108th Ave. Sunrise, FL 33351
- Voice: 954-577-4455
- Fax: 954-929-5560
- Toll Free: 800-762-1084
- Technical Support
- Voice: 844-393-7575
- Fax : 954-756-8015
- Email : chauvetcs@chauvetlighting.com
EUROPE
- General Information
- Address: Stokstraat 18 9770 Kruishoutem Belgium
- Voice: +32 9 388 93 97
- Technical Support
- Email: eutech@chauvetlighting.eu
- Website : www.chauvetdj.eu
- General Information
- Address: Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT
- Voice: +44 (0) 1773 511115
- Fax: +44 (0) 1773 511110
- Technical Support
- Email: uktech@chauvetlighting.com
- Website: www.chauvetdj.eu
MEXICO
- General Information
- Address : Av. de las Partidas, 34-3B, Zona Industrial Lerma (Entrance by Calle 2) Lerma, Edo. de Mexico C.P. 52000
- Voice: + 52 728-690-2010
- Technical Support
- Email:servicio@chauvet.com.mx
- Website : www.chauvetdj.mx
Visit the applicable website above to verify our contact details and instructions to request support. Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact the dealer of record.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>