Convair CFH01 Oscillating Fireplace Ceramic Fan Heater Owner’s Manual
- June 17, 2024
- Convair
Table of Contents
Convair CFH01 Oscillating Fireplace Ceramic Fan Heater
Specifications
- Model: CFH01
- Product Type: Oscillating Fireplace Ceramic Fan Heater
- Power Supply: Single phase 10 Amp socket
- Power Cord: Included
Safety
General Safety
Please read these instructions before using the heater and keep for future reference. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction in using the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Do not poke anything through the ventilating slits.
Positioning and Usage Safety
- Always use the heater in an upright position.
- Stand it on a firm, solid, horizontal base (not on thick pile carpets).
- WARNING: In order to avoid overheating, do not cover the heater.
- Leave nothing hanging above or in front of the heater (e.g. clothes, curtains, bedding, fabrics). Be sure that the back panel vent slots on the heater are uncovered otherwise it will overheat. Clean these openings at regular intervals to prevent airflow reduction (refer Maintenance section).
- The heater surfaces are hot when in use. To avoid burns, keep bare skin away from the top ventilation outlets. Leave plenty of room around the heater.
- Do not use this heater outdoors, or on wet surfaces. Do not use the heater near flammable areas or substances.
Electrical Safety
- Connect the heater to a single phase 10 Amp socket only. Do not plug into double adaptors or multi-outlet power boards.
- Make sure that the heater never comes into contact with water. Never position the heater under a power outlet.
- Never turn the heater on if the power supply cord is damaged or if the heater’s casing is obviously damaged. If the power supply cord is damaged it must be replaced by the manufacturer, a service agent or similarly qualified persons in order to avoid a hazard.
- Do not pull the heater along by the power cord or place the cord near the heater’s surfaces. Always uncoil the power cord completely before use. Use of extension cords is not recommended.
- Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool. If the heater is to be used in a bathroom, ensure that switches and other controls cannot be touched by a person in the bath or shower.
- Do not use this heater with a programmer, timer, separate remote-control system, or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
- Always turn the heater off and unplug from the power socket when not in use.
Safety Devices
To avoid overheating problems, the inbuilt safety device will interrupt electricity in the event of the heater overheating.
If this should happen:
- Check that the heater is positioned correctly, not close to any furnishings.
- See that there is no dust or other obstacles blocking the vent slots.
- Clean the vent slots if necessary
The heater is also equipped with a ‘tip-over’ switch, which will turn off power to the heater elements if it should fall over.
Features
- Fireplace effect
- Air outlet
- Safety grille (heating element behind)
- Base
- Handle
- Air intake
- Control panel
- Power supply cord
Product Usage Instructions
- Place the heater on a firm, solid, horizontal base.
- Ensure the back panel vent slots are uncovered for proper airflow.
- Plug the power supply cord into a single phase 10 Amp socket.
- Turn the control panel to the desired temperature setting.
- The heater will start producing heat and the fireplace effect will be visible.
- Keep bare skin away from the top ventilation outlets to avoid burns.
- When not in use, turn off the heater and unplug it from the power socket.
OPERATION
CONTROL PANEL
- Step 1: Use the POWER switch to turn on the heater. The fireplace effect will start. Heating can only occur if this switch is activated. The fireplace effect can be active without heating or oscillating.
- Step 2: Use the 2 HEAT switches to select the desired heating output power. Refer to table across for heating outputs.
- Step 3: Use the OSCILLATION button to set the heater to rotate from side to side.
- Step 4: Use the POWER switch to turn off the heater
CLEANING AND STORING
Waste electrical products must not be disposed of with household waste.
This product should be taken to your local recycling centre for safe
treatment. Always disconnect the appliance from the main power outlet and
ensure the heater has completely cooled prior to cleaning.
Clean the outside of the heater, by wiping with a damp lint free cloth. Use a
dry cloth to wipe off any moisture left on the heaters surface.
Regularly check and clean the air intake (refer page 2) is free of dust and
obstructions. Use a dry cloth to clean the air intake.
Do not use any detergents/solvents or chemical cleaning agents to clean the
heater. Do not immerse in water, or allow any parts to come into contact with
any liquids.
Make sure that the heater has cooled down completely before storing. Storing
the heater in its original box is highly recommended.
WARRANTY
In this warranty:
We or us means Seeley International Pty Ltd. ABN 23 054 687 035, and our
contact details are set out at the end of this warranty; You means you, the
original end-user purchaser of the Goods;
Supplier means the authorised distributor or retailer of the Goods that sold
you the Goods in Australia; and
Goods means the product, unit, appliance or equipment which was accompanied by
this warranty and purchased in Australia.
Our Goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the Goods repaired or replaced if the Goods fail to
be of acceptable quality and the failure does not amount to a major failure.
In addition to any rights and remedies that You may have under the Australian
Consumer Law or any other law, subject to the terms of this warranty, We
provide the following warranty:
-
If, during the first 24 months from the date of first retail purchase (Warranty Period), the Goods upon examination prove defective by reason of improper workmanship or material, We will replace the Goods or any part thereof without charge. We may substitute with any similar Goods (including a panel heater, or a portable heating product of a different size or shape), even if it is not on our current price/equipment list. Alternatively, we may arrange a refund of the purchase price you paid.
-
We are under no obligation to replace the Goods under clause 1 if the Goods have not been used only for personal, domestic or household purposes and have not been installed/mounted
(if relevant), operated, and maintained in accordance with the instructions in the Owner’s Manual. The addition of any third party device or the removal or the alteration of any of our components will void this warranty. In addition, the warranty granted under clause 1 does not apply to: -
Adjustments necessary due to misuse of the appliance,
-
Normal user maintenance,
-
Setting of controls,
-
Transit damage, or
-
Damage caused by user misuse, tampering, or failure to observe the care and special provisions in the instructions.
-
The warranty granted under clause 1 is limited to replacement only. As far as the law permits, We will not be liable for any consequential loss suffered through, or resulting from, the non operation, or ineffective operation of the Goods. The warranty granted under clause 1 does not cover damage to the Goods or other loss resulting from acts of God.
-
No other person, firm or corporation is authorised by us to offer or give on our behalf any other or greater warranty than that given under this warranty. The benefits conferred by this warranty are in favour of You and any person deriving title to the Goods through or under such person and are intended to be separate from and additional to all other rights and remedies that they may have in law in respect of the Goods.
-
We are not responsible in any way for any failure and/or inadequate performance of the Goods which arises from or is connected to the use in the Goods of non-genuine spare parts. We strongly recommend that only spare parts supplied or approved by us are used in the Goods.
-
In order to claim under the warranty granted under clause 1 You must within the Warranty Period return the Goods to the Supplier at the place of purchase together with the proof of purchase.
-
Alternatively, you may claim under the warranty granted under clause 1 by within the Warranty Period returning the Goods to us at the address below together with: (i) a covering letter which states your name and address, daytime telephone number, and model and serial number of the goods, (ii) the legible and unmodified proof of purchase, which clearly indicates the name and address of the original retailer, the date and place of purchase, and the product name or other product serial number, and (iii) a copy of the completed Warranty Information below.
-
This warranty does not cover the cost of claiming under the warranty, it is your responsibility to cover all forwarding and freight costs incurred in returning the Goods to the Supplier at the place of purchase or us.
-
This warranty is only valid and enforceable in Australia.
Our liability under this warranty is limited to the extent permitted by law. That is, to the extent that it is fair and reasonable, if the Goods are not of a kind ordinarily acquired for personal, domestic or household use or consumption, your remedies associated with any failure or defect of the Product will be limited to:
- (a) the replacement of the Goods or the supply of equivalent goods;
- (b) the repair of the Goods;
- (c) the payment of the cost of replacing the Goods or of acquiring equivalent goods; or
- (d) the payment of the cost of having the Goods repaired and subject to the terms and conditions included in this warranty.
For technical assistance before returning the product please contact:
1300 650 399
Please retain your receipt as proof of purchase. Every request for warranty
must be accompanied by proof of purchase.
Complete the following for your records:
You can also register your warranty with us on our website.
Service Department
Seeley International Pty Ltd
112 O’Sullivan Beach Road
Lonsdale, South Australia 5160
Technical assistance in Australia: 1300 650 399
Website: www.seeleyinternational.com
PRIVACY NOTICE
Seeley International Pty Ltd ABN 23 054 687 035 will use the personal
information you provide us with to provide warranty support for the product
you have purchased and to inform you about other products and services. If you
choose not to supply us with the information requested, we may be unable to
provide you with warranty support. We may also disclose your information to
third parties, such as related entities; retailers, distributors, service
agents and contractors who are affiliated with us; or marketing or market
research companies. If you would prefer not to receive direct marketing
communications from us, please follow the instructions to “unsubscribe” which
will be included in the direct marketing communications we send you, or
contact our Privacy Officer using the details set out below. While we do not
currently transfer personal information to overseas recipients or store
personal information overseas, if we transfer your information to third
parties who do so, we will take reasonable steps to ensure that the overseas
recipients do not breach the Australian Privacy Principles. By registering
your warranty, you consent to having your personal information used in this
way. Please read our Privacy Policy on our website www.seeleyinternational.com
for further explanation of how we collect, use, hold and disclose personal
information, and how you may access and seek correction of your information.
It also sets out how you may complain about a breach of the Australian Privacy
Principles, and how we will deal with your complaint. You may contact us at:
Privacy Officer, Seeley International Pty Ltd, 112 O’Sullivan Beach Road,
Lonsdale, South Australia 5160.
FAQ
Q: Can I use this heater outdoors?
A: No, this heater is not designed for outdoor use. It should only be used indoors.
Q: What should I do if the power supply cord is damaged?
A: If the power supply cord is damaged, it must be replaced by the manufacturer, a service agent, or similarly qualified persons to avoid any hazards.
Q: Can I use an extension cord with this heater?
A: The use of extension cords is not recommended. Always uncoil the power cord completely before use.
References
- Seeley International - World Leading Air Conditioners
- Seeley International - World Leading Air Conditioners
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>