NEXIGO PS5 1551S Horizontal Stand with Silent Enhanced Cooling Fan User Manual
- June 17, 2024
- NEXIGO
Table of Contents
NEXIGO PS5 1551S Horizontal Stand with Silent Enhanced Cooling Fan
Register to get EXTRA ONE YEAR warranty. Only valid in registering within 14
days of product delivery.
nexigo.com/warranty
Welcome to the NexiGo Family!
Thank you for choosing the NexiGo Horizontal Stand and Cooling Fan! You are
now part of an exclusive club: the NexiGo family! It’s our job to make sure
you enjoy your membership. If you have any problems please contact us at
cs@nexigo.com at any time for further assistance. This
product is covered by our industry leading 1-year manufacturers warranty. Make
sure to register your purchase at
nexlgo.com/warranty within 14 days of the
delivery date to extend your warranty coverage to TWO Years!
From all ofus here at NexiGo, we want to welcome you again to the family. We
thank you deeply for your trust and for your business. We know you’ll love it
here. We look forward to serving
you again in the near future.
Yours Sincerely,
The NexiGo Team
Contact Information:
- Website: www.nexigo.com
- Manufacturer: Nexight INC
- Email; cs@nexigo.com
- Tel: +1(458) 215-6088
- Address: 11 075 SW 11th St, Beaverton, OR, 97005, US
Product Introduction:
The NexiGo Horizontal Stand is designed to allow you to place your PSS
console in a horizontal position without damaging the side panels of the unit.
NOTE: It is not recommended to place other objects on top of the console
while it is in a horizontal position.
The NexiGo Cooling Fan for the PSS console is designed to reduce the operating
temperature of the console. improving performance and prolonging the console’s
lifespan. It will automatically turn on/off with PSS console. Powered by a USB
port on the console, it does not require additional adapters or cables to
supply power. Additionally, there is a USB passthrough port on the fan, so you
don’t even have to give up a USB port for the device to function. While
operating the fan will display a blue LED light letting you know the unit is
working. It is compatible with both the PSS Disc and Digital editions as well
as the original stand.
Product Overview
Cooling Fan
How to Attach the Horizontal Stand to the PSS Console:
PSS Digital Edition:
- Ensure the support stand is firmly inserted into the left stand.
- Attach the left stand and right stand to the ends of the bottom plate (the one without the PSS logo) as shown in the following picture.
- When complete it should look like the image below.
PSS Disc Edition:
- Please remove the support stand from the left stand as shown below.
- Attach the left stand and right stand to the ends of the bottom plate (the side with the disc drive) as shown in the following picture.
- When complete it should look like the image below.
How to Attach the Cooling Fan to the PSS Console:
Step 1
Step2
- Slide the hooks at the top of the fan into the uppermost slots in the back grill of the PSS console.
- Insert the USB fan power connector into the upper USB port (it will be positioned right over the correct port) at the back of the PSS console.
- The fan is now ready to use.
Specifications of Cooling Fan,
- Working Voltage/Current: DC 5V = SOOmA
- Product Size: 7.68 x 2.48 x 1.38 inches (L x W x H)
- Product Material: ABS
- Number of Fans: Three (3)
- Product Compatibility: Compatible with both the PSS
- Disc and Digital editions as well as the PSS original stand.
Notes:
- Do not block or impede airflow to this cooling fan. Ensure the console has a reasonable amount of clearance on all sides so airflow Is not obstructed.
- Do not stick fingers or other objects into any of the openings on this cooling fan. You may damage the unit or injure yourself
- Please use a clean dry cloth to clean the products. Do not clean the products with water. alcohol. or other cleaning agents. When cleaning the cooling fan. please unplug it first.
- The products can not be used and/or stored in high humidity conditions.
- If the products are damaged. please exercise the warranty or dispose of the items. Do not attempt to open and repair them independently.
- To ensure the longevity and lifespan of the stand. protect it from dust and do not stack heavy objects on it
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment This
device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference. and
- this device must accept any interference received. including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>