K9125 Blukar LED Head Lamp User Guide
- June 17, 2024
- Blukar
Table of Contents
K9125 Blukar LED Head Lamp User Guide
Physical Diagram
- Sensor Button
- Switch Button
- Headlamp
- Charging Port
- Headband
- Angle Adjustment Plate
- Sensor Indicator
- Charging Indicator
Welcome
Thank you for purchasing this Blukar product. In order to ensure optimum
performance and safety, please read this user manual carefully and keep it for
future reference. If you need any additional assistance, please contact our
customer support team or send us an email to
[email protected].
Packing List
1 x Headlamp
1 x Headband
1 x USB Cable
1 x User Manual
On/Off Mode
Press the switch button 1 time to turn on the light (XPG Light. Strong Light).
Press the switch button 2 times to switch the light (COB Light, Strong Light).
Press the switch button 3 times to switch t he light (XPG + COB Light, Strong
Light ).
Press the switch button 4 times to switch the light (COB Light, Strong Red
Light).
Press the switch button 5 times to switch the light (COB Light. Red Strobe
Light).
Press the switch button 6 times to turn off the light
Steple55 Dimming Function: Long press the switch button to adjust the
brightness (100%-30’il).
NOTE: Brightness can only be adjusted when the light is on.
Sensor Mode
Press the sensor button 1 time, the sensor indicator (blue) lights up arld
enter the sensor mode (XPG Light, Strong Light).
Press the sensor button 2 times to switdi the light (COB Light, Strong Light).
Press the sensor button 3 times to switch the light (XPG+COB Light, Strong
Light).
Press the sensor button 4 times to t urn off the sensor mode and turn off the
light.
Note:
- In any operating mode, if you select a brightness mode and no operation for more than 8 seconds, the light will directly switch oft when you press the button again.
- Waving your hand within 15cm in front of the headlamp to turn on/off the light in sensor mode.
Charging
- Please make sure tne product is fully charged when you use it for the first time.
- Please use the included or certified USB cable for charging when the light is dimmed.
- Charging red light: fully charged: green light
- The red light will flash when the headlamp power is weak.
Warning
- Avoid drops. impact, and extrusion.
- The high light mode is very bright; in this mode it is normal for the headlamp to heat up. The perceived temperature depends on personal perception and the ambient temperature. The maximum temperature is within the standard limits. The headlamp is safe to use.
- Do not disassemble and replace the internal parts of the lamp by yourself, so as not to damage the product or even cause safety hazards.
- The light source of this luminaire is not replaceable and t he whole lurninaire should be replaced when the lights source has reached the end of its life.
- It is not recommended to leave the product in an uncharged state. If not used for a long periocl of time, charge the headlamp at least once every 3 months.
- Please use a safety-certified adapter when charging, and never overload the circuit, as this may cause electric shock or fire. Cut off the power in time after fully charged.
- Do not use this product in extremely hot or cold environments (<-25°C/ >4CfC).
- Keep it away from water. fire, flammable gas and corrosive liquid.
- Children should use this product under the supervision and guidance of adults.
- Do not look directly into the light source to avoid eye irritat ion.
- In order to prolong the service life of the battery, please do not overcharge or over discharge.
This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to t he product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.
TEL: 1-800-360-5881
EMAIL: [email protected]
WEBSITE: www.blukar.com
@Shenzhen Teng Xun Zllan YI Technology Co., ltd. Al1 rights reserved.
Blukar LED Headlamp
Model No.: k9125
ManufaGturer: Shenzheri Teng Xuri Zhan Yi Technology Co., Ltd.
Manufacturer Address: Room 302, Building 8, Yunli Intelligent Part, Fada
Road, Ban1ian Street. Longgang District, Shenzhen. Guangdong. China
This device complied with Pert 15 of the FCC Rule&. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.