DEPSTECH DS260 Endoscope Inspection Camera User Manual
- June 17, 2024
- DEPSTECH
Table of Contents
DEPSTECH DS260 Endoscope Inspection Camera
Specifications
- Model: DS260
- Screen Spec: Single Lens 2.4 IPS LCD Screen
- Camera Diameter: 8 mm (0.31 in)
- Focal Range: 3-10 cm (1.18-3.93 in)
- Photo Resolution: N/A
- Camera View: N/A
- Battery Life: N/A
- Charging Time: N/A
- Charging Voltage and Current: DC 5V/2A
Product Features
The Industrial Endoscope DS260 offers the following features:
- High-resolution single lens 2.4 IPS LCD screen
- 8 mm camera diameter for versatile usage
- Focal range of 3-10 cm for detailed inspection
Product Introduction
The Industrial Endoscope DS260 is a versatile tool for inspection and
maintenance tasks. With its high-resolution screen and compact design, it
provides clear visuals and easy maneuverability in tight spaces.
Charging Instructions
- Connect the device to the DC 5V adapter for charging.
- The indicator will stay on red when the device is being charged.
- The indicator will turn green when fully charged.
Guide For Accessories Installation
To install accessories, follow these steps:
- Turn counterclockwise to remove the protective cap.
- Attach the desired accessory by turning it clockwise until tight.
FAQ
-
Q: What is the battery life of the Industrial Endoscope DS260?
A: The battery life is not specified in the user manual. -
Q: What is the charging time for the device?
A: The charging time is not specified in the user manual. -
Q: What is the camera resolution and view angle?
A: The camera resolution and view angle are not specified in the user manual.
Product Features
- DEPSTECH is a booming technology company, specialized in creating various endoscopes and committed to make you feel more secure.
- DS260 is a high-performance industrial endoscope equipped with a 2.4 inch IPS LCD display screen, which has multiple functions to help you see small areas that cannot be seen by the eyes. Such camera uses high-performance CMOS chip that supports the record-high frame rate to get clear images with Bluart 3.0 technology, widely used in industrial maintenance, appliance maintenance, mechanical maintenance and design and other fields.
Special Warning and Notice
- This product is a camera of industrial endoscope, not applicable to medical or physical examination!
- In order to lengthen the battery life, it is recommended that you should charge the device once every 3 months whether it is used.
- Do not try to replace internal battery by yourself, because unprofessional operation may lead to risks of personal injury due to battery overheating, etc.
Safety and Protection
- Probe of camera is an electronic device of high precision, so please do not hit the probe of camera or pull the cables, which may lead to failure of the device.
- With IP67 waterproof layer, the probe shall be used with extra care and protected from scratches!
- Camera probe is made from materials that are not high temperature resistant, so make sure the internal temperature of any internal combustion engine or other equipment whose internal temperature is higher has been cooled when they are examined, otherwise the device will be directly damaged!
- In case of device damaged, please do not dismantle it by yourself, but contact the seller or the supplier for more professional maintenance services.
- Children may not use this device independently without the guidance of adults.
Operating and Storage Environments
- The device should be operated at an ambient temperature of 32~113℉ (0~45℃).
- The device should be stored in a dry, clean, oil-free and waterless place without any chemical liquid.
Product Introduction
-
Hold this button for 2s to power on/off the endoscope.
-
Click to zoom out.
-
Click to adjust the brightness of the LEDs.
Click to zoom in. -
Type-C Charging Port
For charging (Type-C cable connected to the adapter) -
Charging Status LED indicator
-
Red LED indicator stay on: Charging status
Green LED indicator stay on: Charging finished -
Reset Button
Short click the reset button to shut down the device
Charging Instructions
- Connect the device to the DC 5V adapter for charging;
- The indicator will stay on red when the device is being charged, and will turn green when fully charged.
Guide For Accessories Installation
Installation method
Specifications
Packing List
FCC Requirement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CE compliance:
This device complies with EN 60065 standard, which means this device will not
do harm to the user or products as following situations: 1)Electric shock
2)High temperature 3)Radiation 4)Explosion from inner 5)Mechanical Harm 6)Fire
Hazard 7)Chemical burns.
EU Conformity Statement:
This product and – if applicable – the supplied accessories too are marked
with “CE” and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EC, the RoHS Directive
2011/65/EU and Amendment (EU) 2015/863.
WEEE Notice:
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info
2013/56/EU (battery directive):
This product contains a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the product documentation for
specific battery information. The battery is marked with this symbol, which
may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your supplier or to a designated
collection point. For more information see:
www.recyclethis.info
- EC REP: E-CrossStu GmbH. Mainzer Landstr.69,60329 Frankfurt am Main
- UK REP: DST Co.,Ltd. Fifth Floor 3 Gower Street, London, WC1E 6HA, UK
Customer Services
Please contact us if you have any questions, we love to hear from you
www.depstech.com
Facebook Official Page: @DEPSTECH. FANS
Shenzhen Deepsea Innovation Technology Co., Ltd.
Room 1901-1902, Jinqizhigu Building, No.1 Tangling Road, Nanshan District,
518055, Shenzhen, CN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>