KREAFUNK aSOUND Portable Bluetooth Speaker Box User Manual

aSOUND
Portable Bluetooth Speaker Box
User Manual

aSOUND Portable Bluetooth Speaker Box

Operation manual
KREA FUNK EST.2011

Buttons

| Power
---|---
| Bluetooth
| Previous
| Play / Pause / Handfree
| Next
| Volume –
| Volume +

Charge aSOUND

1. Connect aSOUND with AC adapter directly (included).
2. Red LED turns ON during charging, turns OFF when fully charged.
3. Unplug AC adaptor when fully charged.

Note:
The Red LED will flash and make a sound when the battery power is low (<21%).

Starting aSOUND Bluetooth Speaker

1. When fully charged, hold down the POWER button to turn on the speaker.
2. aSOUND is on standby mode after power-on if the blue LED blinks quickly.
3. aSOUND will turn off for power saving if it is not in use in 10 minutes.
4. Press any button located on the top to activate aSOUND from standby mode.
5. To manually turn off aSOUND Speaker, hold down the POWER button.

Pairing with Bluetooth enabled devices

(Mobile phones/Tablets etc.)

1. Keep the speaker and device within 1 meter of each other.
2. Hold down the power button for 2 seconds to turn on the speaker, the LED indicator will blink quickly in blue while the speaker enters search mode.
3. Start the Bluetooth function on your mobile device and look for “aSOUND” in the Bluetooth device list (depending on the Bluetooth version of your device you may have to enter the pass code ‘0000’).
4. After successfully connecting, the LED will change to solid blue.

Note:

• If the pairing was not successful, turn off the speaker and re-pair again.
• After successful pairing, paired devices will remember each other so there is no need to pair again unless pairing information is deleted.
• To pair with a new device, just follow steps 1-4 above after un-pairing the existing device.

Re-connecting to a paired device

If the speaker does not connect to the last used device automatically, then you will need to select it manually from the list of devices on your mobile device.

Pair aSOUND with a different device

First disconnect with existing device by either holding down the BLUETOOTH button or switching off the Bluetooth connection for the existing device, and then pair with other device according to steps 1-4 above.

Hands-free phone calls

Make sure mobile phone is paired with speaker.

1. Press the “Bluetooth/Handsfree” button to answer an incoming phone call.
2. Press again to end a call.
3. Use the volume buttons to change the volume of the call.

Play / Pause

1. When the speaker is playing music, press the Play /Pause/ Handfree quickly to pause.
2. Press again to continue play.

Next / Previous

1. Press NEXT to go to next track.
2. Press Previous to go to previous track.

Volume control

1. Control volume via the Bluetooth device itself.
2. Control volume via the volume +/- buttons located on top of Speaker.

Connecting external devices (AUX port)

You can connect any music device to the aSOUND speaker via the AUX port using the cable included. The speaker will not use the Bluetooth function while connected via this cable.

1-Pair-2 function

(Stereo option)
When you buy 2 aSOUND, then you can enjoy the stereo sound by connecting 2 together.
Note:
Please ensure to pair 2 aSOUND firstly, then to pair the master one with your BT device to enjoy the music.

1. T urn on 2 aSOUND speakers and make sure both are under BLUETOOTH mode.
2. Press and hold the “BLUETOOTH + PREVIOUS” button at the same time on both units until you hear a “du ~ du ~” sound from both. The devices will then start to search for one another.
3. When “du ~ du ~” sound is heard from both speakers, and LED light changes to constant (not flashing), the two speakers are connected.
4. Now, Press the “BLUETOOTH” button of either one of them to be the master one, until the LED indicator of “BLUETOOTH” button blinks quickly (another one is the secondary one automatically with LED indicator solid).
5. While the LED indicator of master one blinks, it’s ready to be research by other device.
6. Start the Bluetooth function on your mobile device and look for “KREAFUNK” in the Bluetooth device list (depending on the Bluetooth version of your device you may have to enter pass code ‘0000’).
7. After successfully connected, the LED will change to solid Warm-White.
8.  Now you can start to enjoy the STEREO Hi-Fi sound with 2 aSOUND.

Note:
The master one can control the volume-/+ & track previous/next function for both at the same time, but the secondary only can adjust the volume-/+.

This product is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at:
www.kreafunk.com/declaration-of-conformity/
FCC-ID: 2ACVCKREAFUNK2https://manual-hub.com/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>