kreafunk Buzz Kid Friendly Sound Headphones User Manual
- June 1, 2024
- KREAFUNK
Table of Contents
kreafunk Buzz Kid Friendly Sound Headphones
Product Information
Technical Specifications
- Charging time: 1.5 hours (USB) & 1.5 hours (Qi)
- Supports Qi wireless charging
- USB-C cable included
- Hard case included
- Foldable and adjustable fit
- Replaceable ear cushions
- Voice Assistant Built-in
- Lithium battery with 3.7V, 360mAh
- Bluetooth: 5.0
- Range: up to 10m
- Input power: 5V/1A
- Frequency band: 2402-2480 MHz
- Maximal radio frequency effect
Product Usage Instructions
Charging the Headphones
- Use the included USB-C cable to charge the headphones for 1.5 hours.
- You can also use Qi wireless charging for convenience.
Pairing via Bluetooth
- Turn on the headphones by pressing the power button.
- Enable Bluetooth on your device and search for “Buzz” to pair.
Connecting with NFC
- Ensure NFC is enabled on your device.
- Touch your device to the NFC area on the headphones to establish a connection.
Using Active-Noise Cancellation (ANC)
Toggle the ANC feature by pressing the designated button on the headphones.
Voice Assistant
Activate the voice assistant by pressing the voice control button.
FAQ
Q: How do I check the battery status?
A: The LED indicator will show different colours to indicate the battery level. Red signifies a low battery, while green indicates a full charge.
Q: Can I use the headphones while charging?
A: Yes, you can use the headphones while they are charging via USB or Qi wireless charging.
Q: How do I clean the headphones?
A: Use a soft, dry cloth to gently wipe the headphones. Avoid using liquids or harsh chemicals.
Headphones with a story
These headphones have a fascinating story to tell and have lived many lives
before reaching this form. First, we collect plastic bottles and other
consumer waste that would have otherwise ended up in landfills. Then, we shred
them into tiny pieces – let’s call it confetti. After a thorough cleaning
process, the confetti is melted into little balls, and then we cast them into
a Kreafunk mould. But the story doesn’t end there – it’s now your turn to
create moments with your new headphones. Take good care of them and cherish
the unique journey they have been through.
I hope we’ll have lots of fun moments together!
This product complies with the essential requirements and other relevant
provisions of Directive 2014/53/EU. The declaration of conformity may be
consulted at: https://Kreafunk.com/pages/declaration-of-conformity.
- This cute product is made from 100% recycled plastic.
Overview
Using Instruction
Charging
Charge your product to 100% before using it the first time.
Battery status
On/Off
Listen via Bluetooth
Manual Bluetooth pairing
Listen via Bluetooth
Connect with NFC
Listen via NFC
Audio Sharing
Listen via Bluetooth
Play/pause
Change track
Change volume
Active noise cancellation (ANC)
Phone
Voice assistant
Reset
Technical Specifications
- Safe Audio: max. 85dB
- Active Noise Cancellation (ANC)
- 100% recycled GRS plastic and recycled vegan leather
- PFAS free
- Water-resistant (IPX4)
- NFC connection (compatible with Android)
- AUX plug & Audio Sharing (wired)
- Dimensions: 155x170mm
- Weight: 165g
- Speaker: Ø40mm 32Ω
- Playing time: up to 25 hours
- Charging time: 1.5 hours (USB) & 1.5 hours (Qi)
- Supports Qi wireless charging
- USB-C cable included
- Hard case included
- Foldable and adjustable fit
- Replaceable ear cushions
- Voice Assistant
- Build-in Lithium battery with 3.7V, 360mAh
- Bluetooth: 5.0
- Range: up to 10m
- Input power: 5V / 1A
- Frequency band: 2402-2480 MHz
- Maximal radio frequency effect: <2 dBm
- ****The wireless charger is not included
FCC statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference and
- This device must accept any interference received, including inter-ference that may cause undesired operation.
Important:
Changes or modifications to this product not authorized could void the FCC
compliance and negate your authority to operate the product.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, according to part 15 of the FCC Rules. These limits a signed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used per the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2ACVC-BUZZ.
Safety and maintenance instructions
- Please read this operation manual carefully before use.
- The safety and maintenance instructions in this operation manual should be retained for future reference and must be followed at all times.
- Keep the product away from heat sources such as radiators, heaters or other appliances that produce heat.
- Place the speakers in a stable position to avoid falling and causing damage or personal injury.
- Do not expose the product to direct sunlight for longer periods. High temperatures may shorten the life of the product, destroy the battery and distort certain plastic parts.
- Do not expose the product to extreme cold as it may damage the internal circuit board.
- Buzz shouldn’t be left in your car. Especially not in the sunlight.
- Do not charge in direct sunlight. Buzz can operate and charge from – 20 to 65 degrees Celsius.
- Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.
- Avoid liquids getting into the product.
- Before wiping with a dry cloth to clean the speakers, set the power switch to the off position and unplug the power cord from the power outlet.
- Do not throw with or stamp on the product. This may damage the internal circuit board.
- Do not try to disassemble the product. This must only be done by a professional.
- Do not use concentrated chemical products or detergent to clean the product.
- Keep the surface away from sharp things, as these may cause damage to the plastic parts.
- Use 5V/1A power supplies only. The connection of power supplies with higher voltage may lead to severe damage.
- Do not arbitrarily discard or place the lithium battery near fire or intense heat to avoid a risk of explosion.
If you do experience any problems with your product please contact the retailer you purchased the product from. The retailer will provide you with guidance and if that does not solve the problem, the retailer will handle the claim directly with Kreafunk.
Kreafunk ApS
- Klamsagervej 35A, st. 8230 Aabyhoej Denmark
- www.Kreafunk.com.
- info@Kreafunk.dk.
- +45 96 99 00 20
If you have any questions, feel free to send us a homing pigeon (the birds that deliver messages). We live in Denmark, so it might be a long journey for the birdie. You can also e-mail us at info@kreafunk.dk or contact your local shop.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>