Kreafunk KCT-05-SRPSWF Wireless charger User Manual

: June 1, 2024
: KREAFUNK

Table of Contents

Kreafunk KCT-05-SRPSWF Wireless charger
Product Usage Instructions
FAQ
Overview
Technical specifications
Safety and maintenance instructions
Precautions and taking care of Paddy
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Kreafunk KCT-05-SRPSWF Wireless charger

Product Usage Instructions

Connect the USB-C cable to the charger.
Plug the other end of the cable into a power source that supports 5V/3A – 9V/2.2A – 12V/1.67A.
Place your phone, speaker, or headphones on the charging pad of Paddy.
Ensure there are no obstacles between your device and the charging pad for efficient charging.

FAQ

Q: Can I charge multiple devices simultaneously on Paddy?
A: Paddy is designed to charge one device at a time for optimal performance and safety. Avoid charging multiple devices simultaneously.
Q: What should I do if Paddy stops working?
A: If you experience any issues with Paddy, contact the retailer from whom you purchased the product. They will guide you through troubleshooting steps or handle any claims directly with Kreafunk if needed.

Charging made cute

I’m Paddy. An adorable-looking charger that will ensure that your phone, speaker or headphones will never be out of battery.
I have a fascinating story to tell. Before I became Paddy, I lived many lives as other things – that’s because I am recycled. You see, plastic bottles and other plastic waste are first collected, then shredded into tiny pieces – let’s call it confetti. After a clean-me-up “shower”, the confetti is melted into little balls, and then they get made into a Kreafunk Paddy mould.
Now, this isn’t the end of the story – as it’s now your turn to create magical moments with me.
I hope we’ll have lots of fun moments together!
This product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The declaration of conformity may be consulted at: https://Kreafunk.com/pages/declaration-of-conformity.

Overview

Kreafunk-KCT-05-SRPSWF-Wireless-charger-FIG-3

Charging

Kreafunk-KCT-05-SRPSWF-Wireless-charger-FIG-4

Use

Kreafunk-KCT-05-SRPSWF-Wireless-charger-FIG-5

Technical specifications

100% recycled GRS plastic
PFAS free
Dimensions: 100x13mm (ØxH) – 114mm with ears
Weight: 100g
Standard: Qi
Compatible with Qi-enabled devices
Output power: 15 W (max)
USB-C cable included
Charging efficiency: ≥72%
Charging distance: ≤8 mm
Input power: DC 5V / 3A – 9V / 2.2A – 12V / 1.67A

Safety and maintenance instructions

Please read this operation manual carefully before use.
The safety and maintenance instructions in this operation manual should be retained for future reference and must be followed at all times.
Keep the product away from heat sources such as radiators, heaters or other appliances that produce heat.
Place the speakers in a stable position to avoid falling and causing damage or personal injury.
Do not expose the product to direct sunlight for longer periods. High temperatures may shorten the life of the product, destroy the battery and distort certain plastic parts.
Do not expose the product to extreme cold as it may damage the internal circuit board.
Paddy shouldn’t be left in your car. Especially not in the sunlight.
Do not charge in direct sunlight. Paddy can operate and charge from -20 to 65 degrees Celsius.
Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.
Avoid liquids getting into the product.
Before wiping with a dry cloth to clean the speakers, set the power switch to the off position and unplug the power cord from the power outlet.
Do not throw with or stamp on the product. This may damage the internal circuit board.
Do not try to disassemble the product. This must only be done by a professional.
Do not use concentrated chemical products or detergent to clean the product.
Keep the surface away from sharp things, as these may cause damage to the plastic parts.
Use 5V / 3A – 9V / 2.2A – 12V / 1.67A power supplies only.
The connection of power supplies with higher voltage may lead to severe damage.
Do not arbitrarily discard or place the lithium battery near fire or intense heat to avoid a risk of explosion.

If you do experience any problems with your product please contact the retailer you purchased the product from. The retailer will provide you with guidance and if that does not solve the problem, the retailer will handle the claim directly with Kreafunk.

Precautions and taking care of Paddy

This product should be used and stored at a temperature between -20° to 40°, and humidity should be less than 85%.
Be sure not to place the product in a high-temperature environment during charging to avoid overheating and damage.
Keep this product in a dry place. Never place or use this product in wet or dirty conditions.
Never throw this product into a fire.
Never throw or drop this product as it may cause damage and malfunction.
Do not place anything between the mobile device being charged and the charging pad.
Never attempt to alter or disassemble this product. If there is a problem with the product, please contact your seller for further assistance.
Keep away from high voltage devices (highest 12V).
Do not place the product too close to magnetic stripe cards or chip cards (credit cards, ID cards, etc.) to avoid magnetic failure.
Please keep a distance of at least 20 cm between the product and implantable medical devices (pacemakers, implantable cochlear, etc.) to avoid potential interference with the medical device.
If you need to clean the charger, please make sure it is not connected to the AC adaptor.
Don’t place heavy objects on the product. This may damage the internal circuit board.
This product should be handled with care. Please keep away from toddlers.
Respective countries have their laws on the minimum age allowed to operate chargers. Please check with your respective authority for further information.
All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting an odour, is deformed, abraded, cut or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact the Manufacturer.

If you have any questions, feel free to send us a homing pigeon (the birds that deliver messages).
We live in Denmark, so it might be a long journey for the birdie. You can also e-mail us at info@kreafunk.dk or contact your local shop.