Kreafunk aLIGHT Bluetooth Speaker and Lamp User Manual

June 1, 2024
KREAFUNK

Kreafunk-logo

Kreafunk aLIGHT Bluetooth Speaker and Lamp

Kreafunk-aLIGHT-Bluetooth-Speaker-and-Lamp-product

Product Usage Instructions

  • Charge your Glowie speaker and lamp to 100% before using it for the first time.
  • Use the included USB-C cable and connect it to a power source with DC 5V / 1A input power.

To connect with NFC:

  1. Enable NFC on your device and Glowie.
  2. Hold your device close to Glowie to establish a connection.

FAQ

  • Q: Is Glowie made from environmentally friendly materials?
  • A: Yes, Glowie is made from 100% recycled plastic, making it an eco-friendly choice.
  • Q: How far is the Bluetooth range of Glowie?
  • A: The Bluetooth range of Glowie is up to 10 meters, providing flexibility in usage within a reasonable distance.

Not just any speaker

  • Hi, I’m Glowie. I’m a very talented and cute Bluetooth speaker, especially made for tiny people. I spend my days and nights bringing joy and being a good friend.
  • Before I became Glowie, I lived many lives as other things as my base bottom is recycled. You see, first, plastic bottles and other plastic waste is collected. Then it gets shredded into tiny pieces – let’s call it confetti. After a clean-me-up “shower”, the confetti is melted into little balls, and then they get cast into a Kreafunk Glowie mould.
  • This isn’t the end of the story – as it’s now your turn to create magical moments with me.

I hope we’ll have lots of fun moments together!

This product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.

This cute product is made from 100% recycled plastic.

Overview

Kreafunk-aLIGHT-Bluetooth-Speaker-and-Lamp-fig-1

Charging

  • Charge your product to 100% before using it the first time.

Battery status

On/Off

Listen via Bluetooth

Manual Bluetooth pairing

Listen via Bluetooth

Connect with NFC

Listen via NFC

Play/pause

Change track

Change volume

Change lamp

Sleep sound

Change sleep sound

Change volume (Sleep sound)

Stereo Play (TWS)

Step 1

Kreafunk-aLIGHT-Bluetooth-Speaker-and-Lamp-fig-17Kreafunk-aLIGHT-Bluetooth-Speaker-and-Lamp-fig-18

Step 3

Kreafunk-aLIGHT-Bluetooth-Speaker-and-Lamp-fig-19

Reset

Technical specifications

  • 100% recycled GRS plastic
  • PFAS free
  • Water-resistant (IPX5)
  • NFC connection (compatible with Android)
  • Dimensions: 125x158mm (ØxH)
  • Weight: 480g
  • Speaker: Ø66mm 4Ω 8W (output 5W)
  • Playing time (music): up to 40 hours
  • Playing time (music and LED): up to 15 hours
  • Playing time (LED): up to 20 hours
  • Charging time: 3 hours
  • USB-C cable included
  • Stereo Play (TWS)
  • Colour modes: 5 different
  • Sleep noises
  • Build-in Lithium battery with 3.7V, 2000mAh
  • Bluetooth: 5.3
  • Range: up to 10m
  • Input power: DC 5V / 1A
  • Frequency band: 2402-2480 MHz
  • Maximal radio frequency effect: <2 dBm

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Important: Changes or modifications to this product not authorized could void the FCC compliance and negate your authority to operate the product.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits a signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio / TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

FCC ID: 2ACVC-GLOWIE

Safety and maintenance instructions

  1. Please read this operation manual carefully before use.
  2. The safety and maintenance instructions in this operation manual should be retained for future reference and must be followed at all times.
  3. Keep the product away from heat sources such as radiators, heaters or other appliances that produce heat.
  4. Place the speakers in a stable position to avoid fall and causing damage or personal injury.
  5. Do not expose the product to direct sunlight for longer periods. High temperatures may shorten the life of the product, destroy the battery and distort certain plastic parts.
  6. Do not expose the product to extreme cold as it may damage the internal circuit board.
  7. Glowie shouldn’t be left in your car. Especially not in the sunlight.
  8. Do not charge in direct sunlight. Glowie can operate and charge from -20 to 65 degrees celsius.
  9. Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.
  10. Avoid liquids getting into the product.
  11. Before wiping with a dry cloth to clean the speakers, set the power switch to the off position and unplug the power cord from the power outlet.
  12. Do not throw with or stamp on the product. This may damage the internal circuit board.
  13. Do not try to disassemble the product. This must only be done by a professional.
  14. Do not use concentrated chemical products or detergent to clean the product.
  15. Keep the surface away from sharp things, as these may cause damage to the plastic parts.
  16. Use 5V / 1A power supplies only. The connection of power supplies with higher voltage may lead to severe damage.
  17. Do not arbitrarily discard or place the lithium battery near fire or intense heat to avoid a risk of explosion.

If you do experience any problems with your product please contact the retailer you purchased the product from. The retailer will provide you with guidance and if that does not solve the problem, the retailer will handle the claim directly with Kreafunk.

CONTACT

Kreafunk ApS

Kreafunk-aLIGHT-Bluetooth-Speaker-and-Lamp-fig-37

If you have any questions, feel free to send us a homing pigeon (the birds that deliver messages). We live in Denmark, so it might be a long journey for the birdie. You can also e-mail us at info@kreafunk.dk or contact your local shop.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals