KREAFUNK wiCHARGE GO Portable Qi Charging Pad and Power Bank Instruction Manual

KREAFUNK wiCHARGE GO Portable Qi Charging Pad and Power Bank Instruction Manual

SAFETY AND MAINTENANCE INSTRUCTIONS

1. Please read this operation manual carefully before use.
2. The safety and maintenance instructions in this operation manual should be retained for future reference and must be followed at all times.
3. Keep the product away from heat sources such as radiators, heaters or other appliances that produce heat.
4. Do not expose the product to direct sunlight for longer periods. High temperatures will shorten the life of the product, destroy the battery and distort certain plastic parts.
5. Do not expose the product to extreme cold as it may damage the internal circuit board.
6. Avoid liquids getting into the product.
7. Do not throw with or stamp on the product. This may damage the internal circuit board.
8. Do not try to disassemble the product. This must only be done by a professional.
9. Do not use concentrated chemical products or detergent to clean the product.
10. Keep the surface away from sharp things, as these may cause damage to the plastic parts.
11. Use 5V / 1A power supplies only. The connection of power supplies with higher voltage may lead to severe damage.
12. Do not arbitrarily discard or place the lithium battery near fire or intense heat in order to avoid a risk of explosion.

If you do experience any problems with your product please contact the retailer you purchased the product from. The retailer will provide you with guidance and if that does not solve the problem the retailer will handle the claim directly with KREA FUNK.

PRODUCT INTRODUCTION

This wireless charger with a built-in power bank is composed of a lithium battery of very high quality and a state of the art charge & discharge chip, featuring outstanding performance in terms of safety, efficiency and compatibility

SAFETY

WICHARGE GO is designed with multiple protective features against faults, such as overcharge, over discharge, high temperature and short-circuit in the process of charging and discharging. This provides reliable protection to the power bank and your digital devices.

CHARGING OF WICHARGE GO

Please charge the power bank through the USB-C interface, using the included USB to USB-C cable.

DISCHARGE

Upon discharge, the electric quantity information displayed by the indicator is as follows:

Press the multifunctional button once to turn on the power bank.
Press the multi functional button twice to turn off the power bank.

When using WiCHARGE GO to charge another device, you can press the multi functional button to enable the wireless charging output function. If your device is not Qi-charging compatible the wireless charging function will be disabled automatically within 1 minute. If you remove your device  from WICHARGE GO the wireless charging function will automatically be disabled within 2 minutes. Once the wireless charging function has been disabled you must press the multi functional button again to enable it.

Upon wireless charging, make sure to align the center of your Qi-compatible device to the center of WICHARGE GO; if the wireless charging can’t be initiated, please adjust the position of your device until the correct charging state is shown on your device.

SPECIFICATIONS

Standard: Qi
Compatible with Qi-enabled devices
High performance 6000mAh lithium battery
Charged via USB-C
Charging time: 2-3 hours
Including USC to USB-C charging cable
Wireless output: 18W max.
Induction distance: <5mm
Conversion efficiency of the power bank: 77%
Dimensions: 105x18mm (ØxH)

FCC STATEMENT

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause undesired operation.

Important:
Changes or modifications to this product not authorized and could void the FCC compliance and negate your authority to operate the product.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The declaration of conformity may be consulted at:
www.kreafunk.com/declaration-of-conformity/

Symbols

Documents / Resources

| KREAFUNK wiCHARGE GO Portable Qi Charging Pad and Power Bank [pdf] Instruction Manual
wiCHARGE GO Portable Qi Charging Pad and Power Bank, wiCHARGE GO, Portable Qi Charging Pad and Power Bank, Charging Pad and Power Bank, and Power Bank, Power Bank
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>