NETGEAR GS116v2 Gigabit Ethernet Unmanaged Switch Instruction Manual
- June 17, 2024
- NETGEAR
Table of Contents
NETGEAR GS116v2 Gigabit Ethernet Unmanaged Switch
16-Port Gigabit Ethernet Unmanaged Switch Model GS116v2
Package Contents
- Gigabit Ethernet switch
- Power adapter (varies by region)
- Installation guide
Note: You can wall mount the switch. A wall-mount kit is not included.
Insight app
Register with the NETGEAR Insight app
Use the NETGEAR Insight App to register your switch, activate your warranty, and access support.
- On your iOS or Android mobile device, visit the app store, search for NETGEAR Insight, and download the latest app.
- Open the NETGEAR Insight app.
- If you did not set up a NETGEAR account, tap Create NETGEAR Account and follow the onscreen instructions.
- Tap the menu in the upper-left corner to open it.
- Tap REGISTER ANY NETGEAR DEVICE.
- Enter the serial number located on the bottom of the switch, or use the camera on your mobile device or tablet to scan the serial number bar code.
- Tap Go.
- Tap View Device to add the switch to a network. The switch is registered and added to your account.
Connect the switch
Check the LEDs
When you connect the power adapter to the switch and plug it into an electrical outlet, the LEDs indicate the status.
Technical Specifications
Support
- Thank you for purchasing this NETGEAR product. You can visit https://www.netgear.com/support/. to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources.
- French at https://www.netgear.com/support/download/.)
- For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. Do not use this device outdoors.
- If you connect cables or devices that are outdoors to this device, see https://kb.netgear.com/000057103 for safety and warranty information.
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only. June 2019
- NETGEAR, Inc.
- 350 East Plumeria Drive
- San Jose, CA 95134, USA
- NETGEAR INTERNATIONAL LTD
- Floor 1, Building 3,
- University Technology Centre
- Curraheen Road, Cork,
- T12EF21, Ireland
References
- Do I need to use a surge protector with my NETGEAR Business device? - NETGEAR Support
- NETGEAR Support | NETGEAR
- Download Center | Downloads and Documentation | NETGEAR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>