Outdoor Tech Buckshot Rugged Wireless Speaker User Guide
- June 17, 2024
- OUTDOOR TECH
Table of Contents
BUCKSHOT RUGGED
WIRELESS SPEAKER
Buckshot Rugged Wireless Speaker
Hi.
Good call on picking up the Outdoor Tech. Buckshot wireless speaker. Your experience of the universe will soon be enhanced wirelessly. This manual exists to help make sure that you use it correctly, so you’re definitely going to want to relax for a hot second and look through this.
Kisses,
ANATOMY
| LED light
---|---
| Volume up
| Volume down
| Multi-function button (MFB)
HANDLE BAR MOUNT INCLUDED.
Rubber bicycle handlebar mount in action
(supper)
POWER UP
TO CHARGE
- Connect the power charging ports with a power source. When charging, the RED light will be on. **Full charge time is about 3 hours.
- When the Buckshot is fully charged, the RED light will be off and the BLUE light will be on. **When charging, the Buckshot’s buttons will be not function, but you may use and operate the device via your phone’s controls.
PAIRING/CALLS
Power On/Off
ON: Hold the MFB for 3 seconds until you see a blue LED flashing to power on
the device.
OFF: In standby mode, hold the MFB for 3 seconds until you see the red LED
flashing to power off the device.
ENTER PAIRING MODE
When the headset is off, press and hold the MFB button for 3-5 seconds, or
until the BLUE and RED lights flash alternately.
PAIR
Ensure that the Buckshot is writhing 3 feet of your device.
Enter pairing mode on the Buckshot.
Search for your Bluetooth manager on your Bluetooth device.
Find Buckshot on your device and select it for pairing.
If asked for a password, enter “0000”
PHONE FUNCTIONS
RECEIVE A CALL
When there is a call, press the multifunction button once to answer.
END A CALL
After the call is over, press the multifunction once to end it.
REJECT INCOMING CALL
Press and hold the multifunction button to reject
REDIAL A CALL
In standby mode, press the multifunction button twice and you will hear one
beep. The last number dialed will then redial.
VOICE REDIALING
In standby mode, press the multifunction and volume-up buttons until you
hear the tone for voice dialing.
MUSIC FUNCTIONS
PLAY/PAUSE
In standby mode, press the multi-function button once to activate music
play. Press again to pause.
CHANGE VOLUME
Press the +/- key shortly to raise and lower the volume.
TROUBLE SHOOTING
PLAY/PAUSE
If you are unable to connect your Buckshot with your Bluetooth device,
please try the following:
Ensure your Buckshot is turned on and fully charged.
Ensure the Buckshot is in pairing mode when you try to pair it with your
device.
If the Buckshot is left with BLUE & RED lads flashing alternately in pairing
mode for three minutes it will shut off automatically.
Ensure that your device is Bluetooth capable.
Refer to your device’s manual for information
Ensure the Buckshot is within a maximum of 30 feet form your Bluetooth device
and there are no obstructions, such as walls, statues, or other electronic
devices.
If the above suggestions do not solve your problems, please contact us at
info@outdoortech.com.
AT A GLANCE
SPECS
- Wirelessly connect to any Bluetooth-enabled device.
- Included bar mount accessory.
- IPX5 dust and waterproof standard
- Rugged, minimum design
- Rechargeable lithium-ion battery
- 9-10 hours of Hi-fi sound or talk time
- Range of up to 33 feet from device
BOX INCLUDES
- Buckshot
- USB Charging cable
- Bar mount accessory
- Instructions
K, bye.outdoortech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>