tigo SN8BJDA Stick HD User Manual
- June 17, 2024
- Tigo
Table of Contents
tigo SN8BJDA Stick HD
Product Information
Specifications
- Chipset: Amlogic S805X2
- RAM: 1GB DDR
- Flash: 512MB
- Video Decoding: AV1 MP-10@L4.1 up to 1080@60fps, VP9 Profile-2 up to 1080@60fps, H.265 HEVC MP-10@L4.1 up to 1080@60fps, H.264 AVC HP@L4.2 up to 1080@30fps, AVS2-P2 Profile up to 1080@60fps, MPEG-4 ASP@L5 up to 1080P@60fps (ISO-14496), WMV/VC-1 SP/MP/AP up to 1080P@60fps, AVS-P16(AVS+)/AVS-P2 JiZhun Profile up to 1080P@60fps, MPEG-2 MP/HL up to 1080P@60fps (ISO-13818), MPEG-1 MP/HL up to 1080P@60fps (ISO-11172), RealVideo 8/9/10 up to 1080P@60fps
- Video File Format: Supports .mkv, .wmv, .mpg, .mpeg, .dat, .avi, .mov, .iso, .mp4, .rm and *.jpg file formats
- Video Output: HDMI 2.0b
- Aspect Ratio: Auto, Fullscreen
- DC Input Range: 5V 1A
- Power Consumption: 5W
Product Usage Instructions
Connecting the Stick HD
To use the Stick HD, follow these steps:
- Connect the Stick HD to your TV or monitor using the provided HDMI cable.
- Connect the Stick HD to a power source using the included power adapter.
- Ensure that your ISP router is connected and functioning properly.
- Power on your TV or monitor and select the HDMI input where the Stick HD is connected.
Remote Control
The Stick HD comes with a remote control for easy navigation.
Follow these instructions to use the remote control:
- Insert the battery into the remote control.
- Point the remote control towards the Stick HD and press the desired buttons to navigate through menus and control playback.
Video Playback
The Stick HD supports various video formats. To play a video, follow these
steps:
- Ensure that the video file is in one of the supported formats: .mkv, .wmv, .mpg, .mpeg, .dat, .avi, .mov, .iso, .mp4, .rm, or *.jpg.
- Connect the Stick HD to your TV and power it on.
- Using the remote control, navigate to the desired video file and select it.
- The video will start playing on your TV.
FAQ
-
Q: What are the supported video formats?
A: The Stick HD supports the following video formats: .mkv, .wmv, .mpg, .mpeg, .dat, .avi, .mov, .iso, .mp4, .rm, and *.jpg. -
Q: How do I connect the Stick HD to my TV?
A: Connect the Stick HD to your TV using the provided HDMI cable. Ensure that your TV is powered on and select the corresponding HDMI input. -
Q: Can I use the Stick HD with any ISP router?
A: Yes, you can use the Stick HD with any ISP router as long as it is connected and functioning properly. -
Q: How do I control playback?
A: Use the remote control that comes with the Stick HD to navigate through menus and control playback.
What’s In The Box
- Stick HD
- Quick Guide
- Power Adapter
- HDMI extension cable
- Remote Control
- Battery
- USB Cable
- IR control integrated receiving cable
DEVICE INFORMATION
- HDMI
- Micro USB
DEVICE INFORMATION
SPECIFICATION
Hardware
Chipset| Amlogic S805X2
RAM| 1GB DDR
Flash| 512MB
Video
Video Decoding| AV1 MP-10@L4.1 up to 1080@60fps VP9
Profile-2 up to 1080@60fps
H.265 HEVC MP-10@L4.1 up to 1080@60fps
H.264 AVC HP@L4.2 up to 1080@30fps AVS2-P2 Profile up to 1080@60fps
MPEG-4 ASP@L5 up to 1080P@60fps (ISO-14496)
WMV/VC-1 SP/MP/AP up to 1080P@60fps
AVS-P16(AVS+) /AVS-P2 JiZhun Profile up to 1080P@60fps MPEG-2 MP/HL up to 1080P@60fps (ISO-13818)
MPEG-1 MP/HL up to 1080P@60fps (ISO-11172)
RealVideo 8/9/10 up to 1080P@60fps
Video File Format| Supports.mkv ,.wmv,.mpg, .mpeg, .dat, .avi,
.mov , .iso, .mp4, .rm and *.jpg file formats
Video Output| HDMI 2.0b
Aspect Ratio| Auto, Fullscreen
Video Resolution
Power
DC Input Range| 5V 1A
Power Consumption| 5W
SAFETY INFORMATION
CAUTION!
NOTICE:
To prevent fire and electric shock, do not expose this device to rain or
moisture. To avoid any possible risk of electric shock, never attempt to open
the unit. In case of the unit breaking down, repair of the unit should be
carried out by qualified technicians. No part of this unit should be repaired
by users.
WARNING!
- Place the device in a well-ventilated location to prevent accumulation of internal heat.
- Protect the device from high temperatures, humidity, water and dust.
- Do not place any objects that might damage your unit near it (e.g. liquid-filled objects or candles).
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administra- for, Inc. in the United States and other countries.
FFC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm from your
body.