UTRYUP UT-S26 Stationary Bike for Home User Manual

UTRYUP UT-S26 Stationary Bike for Home

Product Information

UT-S26 EXERCISE BIKE

Specifications

• Main Frame
• Rear Foot Stabilizer
• Front Foot Stabilizer
• Pedals x 2
• Seat Post
• IPAD Holder Support Tube
• Monitor Decoration Cover
• IPAD Holder
• Handlebar Post
• Seat Slider Assembly
• Handlebar
• L-shape Pop pin Knob x 2
• Screwkit
• Seat
• Bottle Holder
• Batteries

Product Usage Instructions

Safety Instructions
Please keep this manual in a safe place for future reference.

Before starting any training, please consult your physician, especially for those who are over 35 years old or with pre-existing health conditions. Please read all instructions before using the machine.

Package Included

1. Main Frame
2. Rear Foot Stabilizer
3. Front Foot Stabilizer
4. Pedals x 2
5. Seat Post
6. IPAD Holder Support Tube
7. Monitor Decoration Cover
8. IPAD Holder
9. Handlebar Post
10. Seat Slider Assembly
11. Handlebar
12. L-shape Pop pin Knob x 2
13. Screwkit
14. Seat
15. Bottle Holder
16. Batteries

Assembly Instruction

Step 1: Install Front and Rear Stabilizer

Step 2: Install the Left & Right Pedal

1. Attach the left pedal to the left crank arm. Tighten securely.
2. Attach the right pedal to the right crank arm. Tighten securely.

Step 3: Install Seat Post

1. As shown in the picture, lightly turn the knob (29) 3 turns to fix it on the frame.
2. Hold the handle of the knob (29) with one hand and pull it out, and put the seat cushion upper and lower adjustment tube (2) into the frame with the other hand. Adjust it to the appropriate height and then rotate the knob (29) to lock the adjustment tube.

Step 4: Install the Seat Slider and Seat

1. Take out the Seat Slider Assembly from the inner package. Remove the Carriage screw(26), Washer(74), and Lock Knob(24) and put them aside.
2. Place assembled Seat(9) and Seat Slider(3) on the Seat Post(2), and then use the carriage screw(26), Washer(74), and Lock Knob(24) to lock it.
3. Place Seat(9) onto Seat Slider(3). Then lock the nuts on both sides of the seat with Tool A#13. Make sure the front of the seat is facing straight ahead when locking.

FAQ

• What should I do if I have pre-existing health conditions?
  If you have pre-existing health conditions, it is recommended to consult your physician before starting any training on the UT-S26 Exercise Bike.

• How do I contact customer support?
  You can contact our customer support team by emailing support@utryup.com or calling Mon-Fri, 9:00 am-5:00 pm PST/PDT.

IMPORTANT!
Please read all details before use, and keep this user manual for future reference. PLEASE CONTACT US BEFORE THE RETURN: Mon-Fri,9:00 am-5:00 pm PST/PDT support@utryup.com.

Explore the Joy of Home Fitness with UTRYUP

Please read the entire manual carefully before installing and using the machine, and save it for further use.

Safety Instructions

• Please keep this manual in a safe place for future reference.
• It is very important to read the entire manual thoroughly before installing and using the machine. Safe and effective training can only be achieved if the machine is properly assembled, properly maintained and used. Make sure all users are familiar with all warnings and precautions of this machine.
• Please consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Your physician’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level. Please always pay attention to your body signals, improper use of the machine may affect your health. If you experience any symptoms (including headache, chest pain, irregular heartbeat, shortness of breath, dizziness, or any discomfort), stop exercising immediately and consult your physician, get permission before training again.
• Always keep children and pets away from the machine. The machine is for adult use only.
• Please use this machine on stable and horizontal ground level, and put a protective layer on the floor or carpet to prevent a floor from damaging. Make sure the distance between the machine and each obstacle is at least 2.0 ft (0.6m).
• Please check all screws and nuts are properly tightened before using the machine. The safe use of the machine can only be guaranteed if the regular maintenance and repairs of undertaken, and worn out and broken parts are changed.
• Please follow the instructions in this manual to use this machine. Please stop using and operating immediately when you find any defective parts or hear any abnormal sound. Make sure all issues are resolved before using it again.
• Please wear sports clothes, sports shoes, or other proper clothes. Loose-fitting clothing is not recommended, as loose clothing may get caught in the machine, hindering the operation and possibly causing an injury.
• This machine is only for home use. The Maximum user weight is 265 lbs.
• This machine is not for professional medical treatment.
• This product is only for family use.
• The overall performance of the machine and all moving parts must be checked regularly to ensure the safety of the machine.
• If the moving parts are damaged, please do not use the machine until the parts are repaired.
• Keep the children away from the machine. The equipment is not for children to use or play with. They can injure themselves accidentally.

Care & Maintenance

• Do not store the machine in a place exposed to direct sunlight, wind and rain, or with high humidity. If needed, please pack the machine to keep children away from touching or playing with it.
• Please check if there’s rust or cracks after long-term storage.
• Please understand that for the consumable parts, the wear and tear may also occur even with proper maintenance.
• For long-term use of this machine, please wipe the dust regularly. Do not water it directly, or wipe it with gasoline, abrasive powder, etc. Otherwise, it might cause cracks on the parts or main body, electric shock or fire. Please use Dilute neutral detergent for maintenance.

Before starting any training, please consult your physician, especially for those who are over 35 years old or with pre-existing health conditions. Please read all instructions before using the machine.

Package Included

Parts Tool List

Assembly Instruction

Step 1: Install Front and Rear Stabilizer
Take out Tool D-Allen Key, 4×Hexagon socket flat round head screws M10*16(35) and 4xWasher Ф10(36)from Toolkit.

• A: Place the Rear Stabilizer (6) as shown in the figure and align it with the fixing holes on the frame. Secure it to the frame with Tool D, Hexagon socket flat round head screw M10*16 (35) and the Washer 10(36).
• B: Place the Front Stabilizer (7) as shown in the figure and align it with the fixing holes on the frame. Secure it to the frame with Tool D, Hexagon socket flat round head screw M10*16 (35) and the Washer Ф10(36).

Step 2: Install the Left & Right Pedal

1. Remove the left Hexagonal nut (102) on the left pedal (56) and the right Hexagonal nut(99) on the right pedal (40) respectively with Tool B #19 and put them aside.
2. Install the left pedal (56) by vertically aligning it with the left crank hole. Rotate the left pedal (56) 3 turns by hand in the direction shown in the figure (towards the direction of the flywheel), and then lock the pedal with the Tool A #15.
3. Finally, install the removed Hexagonal nut (99) back onto the pedal with Tool B #19.
4. Install the right pedal (40) in the same way. Note that the direction of tightening is all toward the flywheel.

Step 3: Install Seat Post

1. As shown in the picture, lightly turn the knob (29) 3 turns to fix it on the frame. (Figure A)
2. Hold the handle of the knob (29) with one hand and pull it out, and put the seat cushion upper and lower adjustment tube (2) into the frame with the other hand. Adjust it to the appropriate height and then rotate the knob (29) to lock the adjustment tube. (Figure B)

Step 4: Install the Seat Slider and Seat

1. Take out the Seat Slider Assembly from the inner package. Remove the Carriage screw(26), Washer(74) and Lock Knob(24) and put them aside(Figure A).
2. Place assembled Seat(9) and Seat Slider(3) on the Seat Post(2), and then use the carriage screw(26) & Washer(74) & Lock Knob(24) to lock it.
3. Refer to figure as below, place Seat(9)onto Seat Slider(3). Then lock the nuts on both sides of the seat with Tool A#13. Make sure the front of the seat is facing straight ahead when locking(Figure B).

Step 5: Install Sensor Middle Wire and Handlebar Post

1. Take out L-shape Pop pin Knob (29) from inner package and rotate 3 turns to fix it to the frame.
2. Then untie the steel wire fixed at the bottom of the Handlebar Post(4). Secure the Sensor Middle Wire(95) with the end of the steel wire.
3. Pull the uppermost end of the steel wire to drive the Sensor Middle Wire(95) throughout the inside of the Handlebar Post(4) to the top and hold it in place.
4. Hold the Knob(29)Handle and pull it outward, while installing the Handlebar Post(4) into the Main Frame(1) to the proper position. And rotate the knob(29)to lock the Handlebar Post(4).

Step 6: Install Handlebar
Remove the 4xHexagon Socket Head Cap Screw (10) and Washer (17) and put them aside for use.

1. Pull the steel wire to bring the Sensor middle wire(95)connector passes through the slot in the centre of the Handlebar mounting piece.
2. Place Handlebar (5) on Handlebar Post (4) as shown. Make sure the holes are aligned. Secure the Handlebar (5) to the Handlebar Post (4) as shown in the figure by using Tool D #6, Hexagon socket head cap screws (10) and Washers (17).

Step 7: Install IPAD Holder Support Tube and IPAD Holder

1. Take out the IPAD Holder Support Tube (8) from the inner package, and remove the 2 ×Hexagon socket head cap screws (10) on the tube and the 2×Hexagon socket flat round head cap screws (12) at the backward of the tube and put them aside.
2. Place the IPAD Holder Support Tube (8) on the Handlebar (5). Then lock it by using Tool D and Hexagon socket head cap screws (10).
3. Then remove the 2 ×Hexagon socket head cap screws (12), 2×Elastic Pad (13) and 2 × washers (14) from the top of the IPAD Holder Support Tube (8) with Tool C.
4. Align the holes in the back of the IPAD Holder (11) with the holes on the top of the IPAD Holder Support Tube (8). Then secure it by using Tool C and Hexagon socket head cap screws (12), Elastic pad (13), and Washers (14) as shown in the figure.

Step 8: Install Bottle Holder

1. Use the Philips screwdriver head of Tool D to remove the 2×Self-tapping screws(101) from the Mainframe (1) as the below figure shows.
2. Align the screw holes on the Bottle holder(16) with the screw holes on the Mainframe (1). Then tighten the Bottle holder in place by using the removed 2 ×screws(101) and Tool D.

Step 9: Install Batteries
Remove the back cover by hand(Figure A), then prepare the batteries(Figure B) and install two 2A batteries(Figure C). And install the back cover to complete the battery installation (Figure D)

Step 10: Install the Monitor Decoration Cover
Plug the wire from the backward of the Monitor Decoration Cover(98) and the Sensor wire(95) coming out of the Handlebar (5). Then snap the Monitor Decoration Cover(98) onto the Handlebar.

Product Operation Guide

Adjustment method of cushion

• Up and down adjustment method
  Turn the cushion column knob with one hand, loosen it slightly and pull outward. Grab the cushion with the other hand, and pull it up (or down). Slightly move the saddle column up and down after adjusting to the desired position, loosen the spring to restore it to its original position (the knob is already in the hold of the cushion column when you hear a “clicking” sound) and then retighten the knob.

• Front and rear adjustment method
  Loosen the knob at the bottom of the saddle and slide the saddle back and forth. Tighten the knob after adjusting to the desired position.

Adjustment of handrail height

You can adjust the handrail height according to your height.

• Rotate the pull pin, loosen it and put it outward to move the handrail column up and down (Figure A).
• After adjusting to the appropriate height, please align the pull pin and the hole of the handrail column, and tighten it by turning clockwise (Figure B).

If the handle lever can not be moved up and down smoothly, you can apply the lubricating oil. Please note that your hands may get dirty if you touch them directly.

Emergency stop-and-use method of brakes

1. About emergency stop
   The flywheel and the pedal of the dynamic bicycle belong to the linkage state. If the flywheel does not stop rotating, the pedals will not stop rotating. It is dangerous to leave the pedals while the pedals are rotating or to take your foot off the pedals immediately. If you need to stop the pedals in an emergency, please press the brake knob downward until the motorized bike stops.

2. How to use brakes
   In case you want to stop after reaching a certain movement speed, you can put your hand on the knob and push it down to gradually add resistance to the wheels and finally stop the bike.

Machine handling instructions

• When moving the product, hold the front of the handle and push it down so that the moving wheels of the forefoot tube completely touch the ground.
• For women and the elderly, it is easier to hold the front leg tube with your feet and press down on the front of the steering wheel. After lifting up. the movement becomes simple. The method is the same when putting it down, first fix the front leg tube with your feet before putting it down.

Monitor Instructions

Main Display Instruction

Operation Instruction

1. The main window default displays carousel numbers in the following order: “Time,” “Speed,” “Distance,” “Calories,” “Power,” and “Cadence” (Figures 1, 2, 3, 4, 5, 6), switching every 3 seconds.
2. By using the shuttle knob to the left/right, you can fix the display of the corresponding function item in the following order: Carousel -> Time -> Speed -> Distance -> Calories -> Power -> Cadence.
3. In carousel mode, the respective function indicator icons will flash. In fixed display mode, the corresponding function indicator icons will remain steady.
4. In any state, holding down the touch button for 2 seconds will reset the data to zero and enter the settings mode.
5. In the settings mode, a short press of the touch button will switch between setting items and rotating the shuttle knob will set the target values.
6. Goal mode: When target values are set, the control panel operates in goal mode.
7. Free mode: When no target values are set, the control panel operates in free mode.
8. Note: To return the control panel to free mode, it is necessary to reset all target values to zero in the settings mode. Otherwise, it will continue to operate in goal mode.

Data Display Description

Specification

APP Setup Instruction

Download and Use of MERACH

1. To download the MERACH APP, scan the QR Code or search ” MERACH” in the Apple APP Store® or Google Play Store.
2. Open the MERACH APP. Log In or Sign Up.
3. Follow through the in-APP instructions to set up your device.

Download and Use of KINOMAP

1. To download the KINOMAP APP, scan the QR Code or search ” KINOMAP” in the Apple APP Store® or Google Play Store.
2. Open the KINOMAP APP. Log In or Sign Up.
3. Select the corresponding fitness equipment.
4. Turn on Bluetooth, and choose Utryup.
5. Select the type of machine, and find the Model.
6. Start training and explore different workout methods.

Warm-up

Do stretches before exercising. Warm muscles are easier to stretch, so start with a 5-10 minute warm-up, then do some stretches shown below – 5 times, 10 seconds or more per leg. Do it again after the workout.

1. Stretch down
   Bend your knees slightly, slowly bend your body forward, relax your back and shoulders, and try to touch your toes with your hands. Hold for 10-15 seconds, then relax.
   Repeat 3 times (see Figure 1).

2. Seated hamstring stretch
   Sit with one leg straight. Bring the other leg in so that it is snug on the inside of the straightened leg. Try to touch your feet with your hand’s toe. Hold for 10-15 seconds, then relax.
   Repeat 3 times for each leg (see Figure 2).

3. Calf and Achilles tendon stretch
   Stand with both hands against the wall or a tree, and put one foot behind the other. Keep the back leg straight and your heel on the ground, and lean toward a wall or a tree. Hold for 10-15 seconds, then relax.
   Repeat 3 times for each leg (see Figure 3).

4. Quadriceps stretch
   Reach back with your right hand, grab your right foot and slowly pull it toward your hips until you feel the muscles in the front of your thigh tense. Hold for 10-15 seconds, then relax.
   Repeat 3 times for each leg (see Figure 4).

5. Sartorius (inner thigh muscle) stretch
   Sit with your feet facing each other and your knees facing out. Grab your feet with both hands and pull toward your groin. Hold for 10-15 seconds, then relax.
   Repeat 3 times(see Figure5).

Troubleshooting

Problem|

Possible Solution

---|---
How to adjust gear?| Turn the knob clockwise to increase resistance and counterclockwise to decrease resistance.
What to do when the handle shakes slightly?| Check whether the connecting screws of the handle and the front column tube are firmly fixed.
Check if the retaining knob is locked.
What to do when the machine shakes during use?| Check whether the front and rear foot tubes are fastened enough.
What to do when pedals lose?| Following the setup instructions, check whether the left and right pedals are locked on the first step.
Following the setup instructions, check whether the inner fixing nut of the second stage of setting up the pedal is locked.
What to do when the whole machine is slightly tilted?| Check whether the four adjusting foot pads at the bottom of the front and rear foot tubes are on the same plane.
Adjust and rotate the raised foot pads parallel to the floor.
What to when the monitor does not display?| Check whether the positive and negative electrodes of the battery are installed correctly.
Replace the battery with a new one.

Warranty Information

For your reference, we strongly recommend that you record your order number and date of purchase.
Date of Purchase|
Serial Number|

Terms & Policy
UTRYUP warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for 1 year from the date of original purchase. UTRYUP agrees, at our option during the warranty period, to repair any defect in material or workmanship or furnish an equal product in exchange without charge, subject to verification of the defect or malfunction and proof of the date of purchase.

There is no other express warranty.

This warranty does not apply:

• If the product has been modified from its original condition;
• If the product has not been used under directions and instructions in the user manual;
• To damages or defects caused by accident, abuse, misuse or improper or inadequate maintenance;
• To damages or defects caused by service or repair of the product performed by an unauthorized service provider or by anyone other than UTRYUP;
• To damages or defects occurring during commercial use, rental use, or any use for which the product is not intended;
• To damages or defects exceeding the cost of the product.

UTRYUP will not be liable for indirect, incidental, or consequential damages in connection with the use of the product covered by this warranty. This warranty extends only to the original consumer purchaser of the product and is not transferable to any subsequent owner of the product regardless of whether the product is transferred during the specific term of the warranty. This warranty does not extend to products purchased from unauthorized sellers. UTRYUP’s warranty extends only to products purchased from authorized sellers that are subject to UTRYUP ’s quality controls and have agreed to follow its quality controls.

Explore the Joy of Home Fitness with UTRYUP

@utryup

• Customer Service
  support@utryup.com.
  

• Official Website
  utryup.com.

References

• Explore the Joy of Home Fitness.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>