BIXOLON SPP-R200 Series Mobile Printer User Guide
- June 17, 2024
- BIXOLON
Table of Contents
BIXOLON SPP-R200 Series Mobile Printer
Copyright
© BIXOLON Co., Ltd. All rights reserved.
This user manual and all property of the product are protected under copyright
law.
It is strictly prohibited to copy, store, and transmit the whole or any part
of the manual and any property of the product without the prior written
approval of BIXOLON Co., Ltd.
The information contained herein is designed only for use with this BIXOLON product. BIXOLON is not responsible for any direct or indirect damages, arising from or related to use of this information.
- The BIXOLON logo is the registered trademark of BIXOLON Co., Ltd.
- All other brand or product names are trademarks of their respective companies or organizations.
BIXOLON maintains ongoing efforts to enhance and upgrade the functions and
quality of all our products.
In the following, product specifications and/or user manual content may be
changed without prior notice.
Manual Information
This manual contains media specifications needed to use mobile printer.
Receipt Media
Model| Width| Outer diameter| Thickness| Total length
(Reference)
---|---|---|---|---
SPP-R200 Series| 49.5 ± 0.5 mm (1.94” ± 0.2”)| Max. Ø40 mm (Max. Ø1.57”)| 0.07
± 0.005 mm (0.0028” ± 0.0002”)| 12m (39.37’)
57.5 ± 0.5 mm (2.26” ± 0.2”)
SPP-R210 Series| 57.5 ± 0.5 mm (2.26” ± 0.2”)| Max. Ø30 mm (Max. Ø1.18”)| 0.07
± 0.005 mm (0.0028” ± 0.0002”)| 5m (16.4’)
SPP-R300 Series SPP-R310 Series| 79.5 ± 0.5 mm (3.13” ± 0.2”)| Max. Ø50 mm
(Max. Ø1.97”)| 0.07 ± 0.005 mm (0.0028” ± 0.0002”)| 21m (68.89’)
SPP-R400 Series SPP-R410 Series| 104.5 ± 0.5 mm (4.11” ± 0.2”)| Max. Ø57 mm
(Max. Ø2.24”)| 0.07 ± 0.005 mm
(0.0028” ± 0.0002”)| 29m (95.14’)
111.5 ± 0.5 mm (4.39” ± 0.2”)
Recommended media
- PD 150R (Media Thickness 75μm), New Oji Paper Mfg. Co., Ltd.
Black mark specifications
Available black mark location by model
Model|
Black mark location
---|---
Middle of front
(Standard)| Right of front
(0)| Left of front
(4)| Middle of rear
(2)| Right of rear
(1)| Left of rear
(3)
SPP-R200 series| O| X| X| X| X| X
SPP-R210 series| O| X| X| X| X| X
SPP-R300 series| O| O| O| O| O| O
SPP-R310 series| O| O| O| O| O| O
SPP-R400 Series| O| O| O| O| O| O
SPP-R410 series| O| O| O| O| O| O
Front is side to be printed.
Black mark location and dimensions
-
SPP-R200, R210 Series
-
SPP-R300, R310, R400, R410 Series
Density of black mark: Optical density 0.84 ~ 1.34 (Based on the Macbeth measuring instrument)
Label Media
Media specifications
Model| Media width| Outer diameter| Inner diameter of
core| Total length (Reference)
---|---|---|---|---
SPP-R200 Series| 49.5 ± 0.5 mm (1.94” ± 0.2”)| Max. Ø39 mm (Max. Ø1.53”)| 19mm
(0.75”)| 4.5m (14.76’)
57.5 ± 0.5 mm (2.26” ± 0.2”)
SPP-R300 Series SPP-L310 Series| 79.5 ± 0.5 mm (3.13” ± 0.2”)| Max. Ø49 mm
(Max. Ø1.93”)| 19mm (0.75”)| 9.5m (31.16’)
SPP-R400 Series SPP-L410 Series| 104.5 ± 0.5 mm (4.11” ± 0.2”)| Max. Ø56 mm
(Max. Ø2.2”)| 19mm (0.75”)| 13m (42.65’)
111.5 ± 0.5 mm (4.39” ± 0.2”)
XM7-20 Series| 24.5 ~ 57.5 ± 0.5 mm (0.96 ~2.26 ± 0.2”)| Max. Ø57 mm (Max.
Ø2.2”)| 19mm (0.75”)| 13.5m (44.29’)
SPP-L3000 Series| 24.5 ~ 79.5 ± 0.5 mm (0.96 ~ 3.13” ± 0.2”)| Max. Ø66 mm
(Max. Ø2.6”)| 19mm (0.75”)| 19.5m (63.97’)
XM7-40 Series| 49.5 ~ 111.5 ± 0.5 mm (1.95 ~ 4.39” ± 0.2”)| Max. Ø66 mm (Max.
Ø2.6”)| 19mm (0.75”)| 19.5m (63.97’)
Quantity of label (Reference)
Model| Outer diameter|
Height of liner
---|---|---
1”| 2”| 3”| 4”| 5”| 6”
SPP-R200 Series| Max. Ø39 mm (Max. Ø1.53”)| 150| 80| 55| 40| –| –
SPP-R300 Series SPP-L310 Series| Max. Ø49 mm (Max. Ø1.93”)| 330| 175| 120| 90|
70| –
SPP-L400 Series SPP-L410 Series| Max. Ø56 mm (Max. Ø2.2”)| 455| 240| 160| 120|
100| 80
XM7-20 Series| Max. Ø57 mm (Max. Ø2.2”)| 475| 250| 170| 125| –| –
SPP-L3000 Series| Max. Ø66 mm (Max. Ø2.6”)| 685| 360| 245| 185| 150| –
XM7-40 Series| Max. Ø66 mm (Max. Ø2.6”)| 685| 360| 245| 185| 150| 125
Black mark specifications
Available black mark location by model
Model|
Black mark location
---|---
Middle of front
(Standard)| Right of front
(0)| Left of front
(4)| Middle of rear
(2)| Right of rear
(1)| Left of rear
(3)
SPP-R200 Series| O| X| X| X| X| X
SPP-R300 Series| O| O| O| O| O| O
SPP-R310 Series| O| O| O| O| O| O
SPP-R400 Series| O| O| O| O| O| O
SPP-R410 Series| O| O| O| O| O| O
XM7-20 Series| O| X| X| O| X| X
SPP-L3000 Series| O| X| X| O| X| X
XM7-40 Series| O| X| X| O| X| X
Front is side to be printed.
Dimension of Label media, gap and black mark
Density of black mark: Optical density 0.84 ~ 1.34 (Based on the Macbeth measuring instrument)
Linerless Media
General specifications
Model| Width| Outer diameter| Thickness| Total
length (Reference)
---|---|---|---|---
SPP-R200 Series XM7-20 Series| 57.5 ± 0.5 mm (2.26” ± 0.2”)| Max. Ø39 mm (Max.
Ø1.53”)| 0.08 ± 0.01 mm (0.0032” ± 0.0004”)| 10m (32.8’)
SPP-R300 Series SPP-L310 Series SPP-L3000| 79.5 ± 0.5 mm (3.13” ± 0.2”)| Max.
Ø49 mm (Max. Ø1.93”)| 0.08 ± 0.01 mm (0.0032” ± 0.0004”)| 17m (55.77’)
SPP-R400 Series SPP-L410 Series XM7-40 Series| 111.5 ± 0.5 mm (4.39” ± 0.2”)|
Max. Ø56 mm (Max. Ø2.2”)| 0.08 ± 0.01 mm (0.0032” ± 0.0004”)| 24m (78.74’)
Recommended media
- T6087 (Media thickness 76μm), Blumberg GmbH & Co. KG
Black mark specifications
Available black mark location by model
Model|
Black mark location
---|---
Middle of front
(Standard)| Right of front
(0)| Left of front
(4)| Middle of rear
(2)| Right of rear
(1)| Left of rear (3)
SPP-R200 Series| O| X| X| X| X| X
SPP-R210 Series| O| X| X| X| X| X
SPP-R300 Series| O| O| O| O| O| O
SPP-R310 Series| O| O| O| O| O| O
SPP-L310 Series| O| X| X| O| X| X
SPP-R400 Series| O| O| O| O| O| O
SPP-R410 Series| O| O| O| O| O| O
SPP-L410 Series| O| X| X| O| X| X
XM7-20 Series| O| X| X| O| X| X
XM7-40 Series| O| X| X| O| X| X
SPP-L3000 Series| O| X| X| O| X| X
Front is side to be printed.
Black mark location and dimension
-
SPP-R200, R210 Series
-
SPP-R300, R310, R400, R410 Series
-
SPP- L310, L410 Series, SPP-L3000 Series, XM7-20, 40 Series
Media end
Media end should be produced like below type.
-
Black mark type
-
Black bar type
-
Hole type
-
Separate type
Media end must be separated from media core automatically.
Density of black mark: Optical density 0.84 ~ 1.34 (Based on the Macbeth measuring instrument)
RFID Label Media
General specifications
Model| Inlay center ( a )| Inlay position ( x )| Inlay pitch
( y )
---|---|---|---
XM7-40R| The center of the liner| In liner| Max. 400mm
Refer to the “2. Label media” for general label specifications.
Inlay location
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>