Velivi DEN100HD Wine Cellar Instruction Manual

Velivi DEN100HD Wine Cellar

Product Information

Specifications

• Model: DEN100HD
• Support   Phone: (213)432-5433
• Support Email: Velivi@163.com
• Electrical Rating: 115/120V AC, 60Hz, 10A
• Outlet: Grounded 3-prong

Product Usage Instructions

Important Safety Instructions

Your safety and the safety of others are crucial when using the Beverage cooler.

Follow these safety instructions:

• Plug into a dedicated electrical outlet with a matching voltage rating.
• Use a grounded 3-prong outlet and do not remove the ground prong.
• Avoid immersion of the cooler, plug, or cord in water.
• Disconnect power before cleaning or servicing.
• Do not clean parts with flammable fluids.
• Ensure the cooler is level for proper operation.
• Use only for the intended purpose – storing and cooling wines.

Installation Instructions

1. Install a Stainless Steel Handle as per the provided instructions.
2. Follow the guidelines to install your Beverage cooler securely.

Operation Instructions

• Familiarize yourself with the controls.
• Organize storage efficiently using the Beech Shelves.
• Utilize the Door Lock feature as needed.

Care & Maintenance

• Regularly cleaning the interior and exterior of the cooler.
• Following guidelines for power failure, vacation time, and moving the cooler.
• Implement energy-saving tips for efficient usage.

FAQ

Q: Can I store perishable food or medical products in the cooler?

A: No, the cooler is designed specifically for storing and cooling wines. Do not store perishable items inside.

Q: What should I do before disposing of the cooler?

A: Before disposal, remove the door and leave the shelves in place to prevent child entrapment. Comply with local regulations for disposal.

IMPORTANT SAFETY INSTRUCTIONS

• Your safety and the safety of others are very important.
• This Beverage cooler complies with the applicable safety requirements and is safe for daily use.
• However, basic safety precautions should always be followed when using an electrical appliance, to reduce the risk of fire, electric shock, and personal injury.
• Plug into its electrical outlet with a voltage rating that matches the rating label on the cooler (115/120V AC only, 60Hz, 10A).
• Use receptacles that cannot be turned off by a switch or pull chain. Be sure that the plug is fully inserted into the receptacle.
• Plug into a grounded 3-prong outlet. Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
• To protect against electric shock, do not immerse the Beverage cooler, plug, or cord in water or other liquids.
• Never unplug the cooler by pulling the power cord. To disconnect the Beverage cooler, always grip the plug firmly and pull it straight out from the wall outlet.
• Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.
• Do not connect or disconnect the electric plug when your hands are wet. Do not operate the cooler with wet hands, while standing on a wet surface, or while standing in water.
• Unplug the Beverage cooler or disconnect the power before cleaning or servicing. Failure to do so can result in electrical shock or death.
• When moving the Beverage cooler, be careful not to roll over or damage the power cord.
• Never clean Beverage cooler parts with flammable fluids. These fumes can create a fire hazard or explosion.
• Do not store or use gasoline or other flammable vapor and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
• Do not attempt to repair or replace any part of your Beverage cooler unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.
• An empty Beverage cooler can be dangerous to children. Remove any latches, lids, locks, and/or doors from unused or discarded Beverage coolers to prevent child entrapment and suffocation.
• Never allow children to operate, play with, or crawl inside this Beverage cooler.
• Do not use this wine cooler for other than its intended purpose. For indoor, household use only.
•  Move this wine cooler by 2 people. Failure to do so can result in injury.
• Place this wine cooler in a well-ventilated area with temperatures above 15°C (60°F) and below 32°C (90°F).
• To ensure proper ventilation for your wine cooler, the front of the cooler must be completely unobstructed.
• This wine cooler must be installed in an area away from wind, rain, water spray, or drips.
• The wine cooler should not be located next to ovens, grills, or other sources of high heat.
• Do not kink or pinch the power supply cord of the wine cooler.
• The wine cooler needs to be leveled to work properly. You may need to make several adjustments to level it.
• This wine cooler is designed for storing and cooling wines. Do not store perishable food or medical products inside the cooler.
• When disposing of refrigeration wine coolers, special handling is often required. It is the consumer’s responsibility to comply with federal and local regulations when disposing of this product.
• WARNING: Risk of child entrapment and suffocation. Before you throw away this or an old cooler, remove the door. Leave the shelves in place, so that children may not easily climb inside.

FLAMMABLE REFRIGERANT GAS

• DANGER – Risk of fire or explosion. Flammable refrigerant used.
• DO NOT use mechanical devices to defrost the refrigerator. DO NOT puncture refrigerant tubing.
• DANGER – Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained service personnel. DO NOT puncture refrigerant tubing.
• CAUTION – Risk of fire or explosion. Flammable refrigerant used. Consult the repair manual/owner’s guide before attempting to service this product. All safety precautions must be followed.
• CAUTION – Risk of fire or explosion. Dispose of property under federal or local regulations. Flammable refrigerant used.
• CAUTION – Risk of fire or explosion due to puncture of refrigerant tubing. Follow handling instructions carefully. Flammable refrigerant used.
• CAUTION – To prevent a child from being entrapped, keep out of reach of children and not in the vicinity of the cooler.

PRODUCT DIAGRAM

1. Control Panel
2. Beverage Shelves
3. Exhaust Window
4. Leveling Legs
5. Top Hinge
6. Glass Door with Handle
7. Safety Child Lock

INSTALLATION INSTRUCTIONS

Before Using Your Beverage Cooler

• Remove the exterior and interior packaging.
• Check to be sure you have all of the following parts.
  • 3 wired Shelves
  • 2 Keys
  • Stainless Steel Handle
  • Instruction Manual
  • 2 Extra Screws for Installing Handle
• IMPORTANT: Before connecting this Beverage cooler to a power source, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Install the handle on the left side of the door.

To Install Stainless Steel Handle

1. Pull away the door gasket in the area where the handle is to be installed, as Illustration #1. The gasket is easily removed by hand, no tools are necessary.
2. Align the handle with the pre-installed screws on the door frame. Tighten the screws with a screwdriver until the handles secure tightly against the door frame, as Illustration #2. (Do NOT over-tighten as this will cause damage to the handle assembly).
3. Replace the door gasket to its original position.

• Note: This Beverage cooler includes stainless steel handles that are not required to operate this Beverage cooler.
• If you choose not to use the handle supplied, simply follow step 1 to access the pre-installed screws and remove them and then place 2 decorative plugs (NOT included) into the two holes separately.
• Continue to step 3 to replace the door gasket to its original position.

1. Gasket
2. Screw
3. Screw Driver
4. Handle

To Install Your Beverage cooler

• This Beverage cooler is designed for free-standing or built-in (fully recessed) installation. Place your Beverage cooler on a solid and level floor that is strong enough to support it when it is fully loaded.
• This will ensure a vibration-free and noise-free operation.
• Adjust the leveling legs in and out to stabilize the cooler horizontally. If the legs are not properly adjusted, the cooler may be unstable and result in excess noise or vibration.
• Locate the Beverage cooler away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
• Extremely cold ambient temperatures may also cause the cooler not to perform properly.
• It is not advisable to install this cooler in moist areas or directly adjacent to a kitchen sink, as moisture could cause premature corrosion to the components of your new cooler.
• It is recommended you install the Beverage cooler in a place with temperatures above 60°F (15°C) and below 90°F (32°C), and humidity is under 60%.
• If the ambient temperature is above or below recommended temperatures, the performance of the cooler may be affected.
• Placing your cooler in extremely cold or hot conditions may cause interior temperatures to fluctuate, and the temperature range of 3ºC 18ºC (37ºF-64ºF) may not be reached.
• Connect the Beverage cooler to an exclusive, properly grounded, standard electrical supply (115 V AC only, 60 Hz), under the National Electrical Code and local codes and ordinances.
• Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized products service center.
• Warning: Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized service center.
• The Beverage cooler should always be plugged into its electrical outlet which has a voltage rating that matches the rating label on the Beverage cooler. This provides the best performance and also prevents overloading house wiring circuits that could cause a fire hazard from overheating.
• Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
• Do not use an extension cord or adapter plug. However, if you must use an extension cord, it must be a UL-listed, 3-wire grounding type.
• The beverage cooler extension cord has a grounding type plug and outlet and the electrical rating of the cord is 10 amperes (minimum) and 120 volts.
• Do not use a cord that shows cracks or abrasion damage along its length or at either end.
• If the Beverage cooler is going to be used in an area that is prone to power surges/outages, it is suggested that you use a power surge protector.
• The surge protector that you select must have a surge block high enough to protect the Beverage cooler it is connected to. Damages due to power surges are not considered a manufacturer covered defect and will void your product warranty.

OPERATION INSTRUCTIONS

Controls

• After plugging the Beverage cooler into a wall outlet, the cooler would turn on automatically and the LCD screen would show the temperature inside of the cooler.
• After setting your desired serving temperature, allow the cooler to cool down for 3 to 4 hours before placing wine bottles in the Beverage cooler.

Light Control

• The light will automatically turn off 10 minutes later for energy saving.
• Note: To keep the light on always, please press the lighting mark until you hear 2 “beeps.

Storage

• Many cans and bottles may differ in size and dimensions. As such the actual number of bottles you may be able to store may vary.

Door Lock

• This cooler can be secured with a lock and key. The keys are located inside the plastic bag that contains the Instruction Manual.
• Insert the key into the lock and turn it clockwise to lock the door, making sure the metal pin is engaged completely.
• To unlock the door, do the reverse. Remove the key and put it in a secure location.

Wired Shelves

• The appliance is equipped with three wired shelves. You can remove the shelf by lift and pull it out smoothly.
• To prevent damaging the door gasket, make sure to have the door all the way open when pulling the bottom shelf out of the rail compartment.
• For easy access to the storage content, you can pull the shelf approximately 30% out of the rail compartment, however, this unit was designed with a stopper on each side of the shelf track to prevent bottles from falling.

CARE & MAINTENANCE

Cleaning Your Beverage Cooler

• IMPORTANT: Always unplug the cooler before cleaning or performing maintenance. Never use harsh cleansers or scouring pads to clean any part of the cooler.
• Turn off the power, unplug the Beverage cooler, and remove all items including shelves.
• Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning the area near the controls, or any electrical parts.
• Wash the outside cabinet with warm water and a mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.
• Do not use steel wool or steel brush to rub the stainless steel, which will contaminate the stainless steel with steel particles and rusting may occur.

Power failure

• Most power failures are corrected within a few hours and should not affect the temperature of your Beverage cooler. If the power is off for an extended period, proper steps should be taken to protect your contents.

Vacation Time

• Leave the Beverage cooler operating during vacations of less than three weeks. For periods longer than this, turn the Beverage cooler off and leave the door slightly ajar to prevent odor from building inside the Beverage cooler.

Moving Your Beverage Cooler

• Remove all items (bottles) from the cooler;
• Securely tape down any loose items, such as shelves, inside the cooler.
• Turn the adjustable leg up to the base to avoid damage.
• Tape the door shut.
• Ensure that the Beverage cooler stays securely in the upright position during transportation.
• Protect the outside of the Beverage cooler with a blanket or a similar item.

Energy saving tips

• The cooler should be located in the coolest area of the room away from heat sources or direct sunlight.
• Ensure that the cooler is adequately ventilated. Never cover air vents.
• Only open the cooler door for as long as necessary. Frequent opening of the door will affect internal temperature.

TROUBLESHOOTING GUIDE

properly.
The Beverage cooler is turned off.| Press to turn on the cooler.
House fuse blown or tripped circuit breaker.| Check/replace fuse. Reset the circuit breaker.
The Beverage cooler is not cold enough.| External environment may require a higher setting.| Set a colder setting. Allow several hours for the temperature to stabilize.
The Beverage cooler has recently been disconnected for some time.| It takes 3-4 hours for the Beverage cooler to cool down completely.
Prolonged or frequent door openings.| Open the door less often.
The door is not closed completely.| Close the door properly.
The door gasket does not seal properly.| Check the door gasket. Clean or change the gasket if necessary.
The compressor turns on and off frequently.| The room temperature is hotter than normal.| It’s normal for the Beverage cooler to work harder under these conditions.
A large amount of contents has been added to the cooler.| A large amount of contents causes the Beverage cooler to run more until the desired temperature is reached.
Prolonged or frequent door openings.| Open the door less often.
The temperature has not been set correctly.| Press either or to check the set temperature, and set the temperature properly.
The door is not closed completely.| Close the door properly.
The door gasket does not seal properly.| Check the door gasket. Clean or change the gasket if necessary.
PROBLEM| POSSIBLE CAUSE| SOLUTION
---|---|---
The light does not work.| Not plugged in.| Plug the cooler in.
The circuit breaker tripped or a blown fuse.| Check the breaker and/or fuses.
The light button is “ OFF ”.| Press to turn the light ON.
Vibrations.| The cooler is not leveled.| Check to ensure that the cooler is level.
The bottles are vibrating.| Make sure the bottles don ’ t touch each other.
There is an object under the cooler.| Remove the object under the cooler.
**** The cooler seems to make too much noise.| The cooler is not level.| Level the cooler.
Normal noise from the flow of the refrigerant| The rattling noise may come from the flow of the refrigerant, which is normal. As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your cooler. Contraction and expansion of the inside walls may cause popping and crackling noises.
The door will not close properly.| The cooler is not level.| Level the cooler.
The door was reversed and not properly installed.| Re-install the door properly.
The gasket is dirty.| Clean the door gasket.
The shelves are out of position.| Place the shelves properly.
Moisture builds up on the interior or exterior of the Beverage cooler.| This is normal during high-humidity periods.| Lower the room humidity.
This is normal in high-temperature environments.| Move the cooler to a cooler place, and avoid heat and sunlight.
Prolonged or frequent door openings.| Open the door less often.
The door does not seal completely.| Check door gaskets for proper seal.
Error Code: E1-E2-E3-E4-E7-E8| A sensor has failed.| Contact the customer service

Warranty Terms

Warranty Period

1. Customers are entitled to replacement or free repair service in case of quality defects) found in the product within 15 days of receipt of the product.
2. Customers are entitled to free repair service from Velieta for any product proven defective in material or workmanship that results in product failure during normal consumer usage and conditions within the valid warranty period, which is 12 months from the date of selling. However, the warranty period varies by product component and country of purchase.
   • Please contact our after-sales service team via Velivi@163.com for detailed warranty information.

Warranty Exclusions

1. Products subjected to unauthorized repair, misuse, collision, neglect, mishandling, soaking, accident, and unauthorized alteration.
2. Products subjected to improper use or whose labels or security tags have been torn off or altered.
3. Products whose warranty has expired.
4. Products damaged due to force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

1. If failure or any problem occurs with your product after purchase, please contact us on Amazon, or you can always contact Velieta’s customer service through email at Velivi@163.com.
2. Velieta’s customer service will guide you through the whole service procedure regarding any product issue or problem you have encountered.
   • Velieta reserves the right to reexamine damaged or returned products.

Contact Card

• Support Phone: (213)432-5433
• Support Email: Velivi@163.com

Documents / Resources

| Velivi DEN100HD Wine Cellar [pdf] Instruction Manual
DEN100HD Wine Cellar, DEN100HD, Wine Cellar, Cellar
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>