PYLE PLBNPS22 Dual Subwoofer Box System User Guide

PLBNPS22 Dual Subwoofer Box System

Dual Subwoofer Box System Rear Vented Design with Built-in Illuminating LED Lights

WIRING CONNECTION

Power amplifier for schematic diagram. Connect the power amplifier to the positive and negative terminals accordingly as shown.

REMOTE CONTROL FEATURES

• 1. Turn ON/Standby: Press this key to turn on LEDs or switch to standby mode.
• 2/9. Dynamic Mode button : Switch from dynamic mode to color mode or switch between dynamic modes.
• 3/8. Dynamic Mode Speed button: Use these buttons to adjust dynamic mode speed. If the unit is in static mode, pressing these buttons will switch unit to dynamic mode.
• 4/5. Static Color Adjust button: Use this button to swit h between static colors. Pressing these keys while in dynamic mode will switch the unit to static mode.
• 6/7. Brightness Adjust button : Pressing these buttons will adjust brightness while in static mode. If these buttons are pressed while unit is in dynamic mode, it will switch to static mode.
• 10. Demo Mode button: This button will switch the unit into demo mode. While in demo mode, unit will loop through 9 of the dynamic modes with each repeating 3 times.
  www.PyleUSA.com

PLBNPS28 8” Dual Series Vented Subwoofer Enclosure

Rear Vented Design with Built-in Illuminating LED Lights

Technical Specs

• Construction Materials : 15mm Particle Board + Multilayer Board
• External Material : Artificial Leather
• Power Rating : 2×400 Watts Max Power
• Voice Coil: 1.5” · Impedance: 4 Ohms
• Magnet: 2×30 Oz
• Sensitivity: 89 dB
• Frequency Response : 45-800 Hz
• Remote Control Battery Operated, Requires (1) x `CR2025′ Batteries
• Battery Type : 3V Lithium Battery
• Battery Life : Up to 2+ Hours
• Product Dimensions (L x W x H): 25.6” x 11.0” x 11.0” -inches

PLBNPS21 10” Dual Series Vented Subwoofer Enclosure

Rear Vented Design with Built-in Illuminating LED Lights

Technical Specs

• Construction Materials : 15mm Particle Board + Multilayer Board
• External Material : Artificial Leather
• Power Rating : 2×500 Watts Max Power
• Voice Coil : 2.0”
• Impedance: 4 Ohms
• Magnet: 2×40 Oz
• Sensitivity: 90 dB
• Frequency Response : 35-500 Hz
• Remote Control Battery Operated , Requires (1) x `CR2025′ Batteries
• Battery Type : 3V Lithium Battery
• Battery Life : Up to 2+ Hours
• Product Dimensions (L x W x H):28.3” x 13.8” x 13.0” -inches

Features

• Rear Vented Design
• High Powered Woofers with a Silver Paper Cone
• Rubber Edge Suspension
• Smooth Artificial Leather Finish
• 4 Layer Dual Voice Coil
• Binding Post Connectors
• Perfect for Truck and Behind the Seat
• High-Quality Construction

What’s in the Box

• Subwoofer Box
• LED Remote Control

PLBNPS22 12” Dual Series Vented Subwoofer Enclosure

Rear Vented Design with Built-in Illuminating LED Lights

Technical Specs

• Construction Materials: 15mm Particle Board + Multilayer Board
• External Material: Artificial Leather
• Power Rating : 2×600 Watts Max Power
• Voice Coil : 2.0”
• Impedance: 4 Ohms
• Magnet : 2×50 Oz
• Sensitivity : 91 dB
• Frequency Response : 25-300 Hz
• Remote Control Battery Operated, Requires (1) x `CR2025′ Batteries
• Battery Type : 3V Lithium Battery
• Battery Life : Up to 2+ Hours
• Product Dimensions (L x W x H): 30.9” x 15.7” x 15.1” -inches

Questions? Issues? We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com

www.PyleUSA.com

California Prop 65 Warning
WARNING:
This product contains Nickel carbonate which is known to the state of California to cause cancer birth defects and other reproductive harm. Do not ingest.
For more info go to: www.P65warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>