MODINE Schoolmate Sentinel Units Owner’s Manual

MODINE Schoolmate Sentinel Units

Product Information

The Modine Startup Service is designed to maximize equipment performance and reliability for Modine heating, ventilation, andair conditioning (HVAC) products. Whether you are replacing existing equipment or installing new ones, the  Startup Service ensures that the equipment is installed correctly and operates efficiently to provide peak performance and protect your investment.

Modine offers a range of HVAC products, including Direct and Indirect Make-up Air Systems, Classmate, Schoolmate, and Sentinel Units, as well as Horizontal Unit Ventilators.

Included with the Startup Service are various benefits and services, such as a full list of inclusions provided on the backpage of the user manual. For more information, you can visit the official website at www.modinehvac.com or contact
Modine directly at 510-681-5410 or via email at airealeschools@modine.com.

Modine also offers maintenance contracts tailored to suit your needs. Additionally, they provide genuine Modine parts and service through their US base and a wide national supplier network. These parts are available for both Modine and Airedale by Modine products at competitive prices. With fast and efficient service, Modine ensures that the genuine parts are delivered directly to your site when you need them.

For further details about maintenance contracts and genuine Modine parts and service, please visit www.modinehvac.com or contactModine at 510-681-5410.

Modine Manufacturing Company is located at 1500 DeKoven Avenue, Racine, Wisconsin 53403-2552.

Product Usage Instructions

To ensure proper equipment start-up and maximize performance, follow these steps:

1. Review the user manual provided with your Modine HVAC product.
2. Verify that the equipment is installed correctly according to the manufacturer’s guidelines.
3. Perform a thorough inspection of all components and connections to ensure they are secure and in good condition.
4. Before starting the equipment, make sure all electrical and fuel connections are properly connected and functioning.
5. Follow the specific start-up instructions provided in the user manual for your particular Modine HVAC product. These instructions may include adjusting settings, calibrating sensors, or configuring control panels.
6. Monitor the equipment during the start-up process to ensure it is operating smoothly and without any unusual noises or vibrations.
7. If any issues or abnormalities are observed during start-up, refer to the troubleshooting section of the user manual or contact Modine’s support team for assistance.

By following these instructions and utilizing the Modine Startup Service, you can maximize the performance, reliability, and return on investment of your Modine HVAC equipment.

Equipment Performance

Startup Service to Maximize ROI

Whether replacing existing equipment or a new installation, the purchase and installation is only the first step. Proper equipment start-up assures that the equipment is installed correctly and is operating properly to provide peak performance and protect your investment.
Owners can gain peace of mind by choosing Factory Startup Service. Performed by factory-trained technicians with equipment expertise, the following are some of the ways the investment is protected:

• Ensure equipment operates properly for peak performance
• Ensure equipment operates reliably to minimize downtime
• Assure occupant and owner satisfaction

Included with Startup Service

• Pre-startup inspection to validate the unit installation, utility connections, and proper clearances are available.
• Commissioning to verify the unit, options, and accessories are functioning properly, controls are sequencing correctly, and all operating pressures, voltage, and amperages are recorded.
• Factory startup qualifies units for labor warranty (purchased separately).
  For a full list of all that is included in Startup Service, see

1. Direct and Indirect Make-up Air Systems
2. Classmate, Schoolmate and Sentinel Units
3. Horizontal Unit Ventilators

Included in Startup Service

• Inspection to ensure there is no shipping or installation damage
• Verify all clearances meet manufacturer’s specs
• Check all mechanical and electrical connections
• Validate all duct and other connections to the unit are properly sealed
• Ensure proper operation of all unit controls and sequence of operation
• Validate that utilities are sufficient for proper operation (incoming volts, amps and gas pressures)
• Validate options and accessories are operating correctly
• Ensure proper operations of all motors (direction and amp draws), motor starter or VFD
• Check and adjust belt tension (and alignment)
• Validate all linkages are operational and secure (and free of any obstructions)
• Ensure proper operations of all actuators
• Support questions of integration of the equipment by the controls engineer
• Validate the heating section is operating correctly: amp draws, gas pressures and temperatures
• Validate the cooling section is operating correctly: check and record all operating pressures (weather permitting)
• Validate the energy recovery module is operating correctly (record all operating amperages, voltages and temperatures and rotation)
• Check Hot Gas Reheat operation, record all operating pressures and temperatures (if applicable)
• Check DX condensate drain is trapped correctly and primed (weather permitting)
• Check 90%+ condensing heat option (if applicable) to ensure condensate drain line is trapped correctly and primed

Choose a Maintenance Contract to Suit You

• In addition to startup services, Modine offers additional preventative maintenance services for all of your HVAC needs
• Tailored to Modine equipment
• Includes up to four maintenance visits per year
• Full discount available on any genuine Modine parts

Genuine Modine Parts and Service

With a US base and wide national supplier network, genuine parts are available for both Modine and Airedale by Modine products at competitive prices. We offer fast, efficient service with parts delivered direct to your site, when you need them.

To learn more, visit www.modinehvac.com or call 510-681-5410
Call 510-681-5410 or e-mail airealeschools@modine.com
Modine Manufacturing Company 1500 DeKoven Avenue Racine, Wisconsin 53403-2552

References

• Modine HVAC - Find Your Comfort Level

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>