LG WM6700HBA Washing Machine Owner’s Manual

WM6700HBA Washing Machine

us_main.book.book Page 1 Thursday, June 9, 2022 1:51 PM

OWNER’S MANUAL
WASHING MACHINE
Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times. The complete owner’s manual can be found on the LG website at: http://gscs-manual.lge.com/Total/DFZ/NA/FL/FX/main.html or by scanning the QR code. LG is working to create a sustainable tomorrow by publishing parts of this manual online only.
Small actions can have big results!
ENGLISH
WM6700H*A

MFL71693725 Rev.01_062222

www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.

us_main.book.book Page 2 Thursday, June 9, 2022 1:51 PM
2
TABLE OF CONTENTS
3 IMPORTANT SAFETY INSTRUCTIONS
3 READ ALL INSTRUCTIONS BEFORE USE 3 WARNING STATEMENTS 6 CAUTION STATEMENTS
7 PRODUCT OVERVIEW
7 Product Features
9 INSTALLATION
9 Before Installing 10 Choosing the Proper Location 11 Unpacking and Removing Shipping Material 12 Connecting the Water Inlet Hoses 13 Connecting the Drain Hose 14 Leveling the Washer 15 Final Installation Check
17 OPERATION
17 Before Use 18 Loading the Washer 19 Adding Cleaning Products
22 SMART FUNCTIONS
22 Using LG ThinQ Application 25 Smart DiagnosisTM Function
26 MAINTENANCE
26 Regular Cleaning 26 Periodic Maintenance 30 Care in Cold Climates
32 TROUBLESHOOTING
32 Before Calling for Service
36 LIMITED WARRANTY
36 USA 40 CANADA

ENGLISH

us_main.book.book Page 3 Thursday, June 9, 2022 1:51 PM
IMPORTANT SAFETY INSTRUCTIONS 3
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Safety Messages
Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION. These words mean:
WARNING
You may be killed or seriously injured if you do not follow instructions.
CAUTION
You may be injured or cause damage to the product if you do not follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what may happen if the instructions are not followed.
WARNING STATEMENTS
WARNING
· To reduce the risk of explosion, fire, death, electric shock, scalding or injury to persons when using this product, follow basic precautions, including the following:
Installation
· Adhere to all industry recommended safety procedures including the use of long-sleeved gloves and safety glasses.
· Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
· Before use, the appliance must be properly installed as described in this manual. · To reduce the risk of severe injury or death, follow all installation instructions. · Refer to the INSTALLATION INSTRUCTIONS for detailed grounding procedures. Installation instructions
are packed with the appliance for the installer’s reference. If the appliance is moved to a new location, have it checked and reinstalled by qualified service personnel. · Moving or installation of the appliance requires two or more people. · Do not install the appliance in humid spaces. · Store and install the appliance where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. · This appliance is not designed for maritime use or for mobile installations such as in RVs, trailers, or aircraft. · Keep packing materials out of the reach of children. Packaging material can be dangerous for children. There is a risk of suffocation.

us_main.book.book Page 4 Thursday, June 9, 2022 1:51 PM
4 IMPORTANT SAFETY INSTRUCTIONS
· Destroy the carton, plastic bag, and other packing materials after the appliance is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers.
· The appliance must be installed and electrically grounded by qualified service personnel in accordance with local codes.
· When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord. · Connect to a properly rated, protected, and sized power circuit to avoid electrical overload. · This appliance must be positioned near to an electrical power supply. · Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance. · The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a
standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock from this appliance. · Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. · Use new hoses when connecting the washer to the water supply. Do not reuse old hoses.
Operation
· Read all instructions before using the appliance and save these instructions. · Use this appliance only for its intended purpose. · If the product has been submerged in water, sitting in standing water, or waterlogged, do not come in
contact with the product and immediately contact an LG Electronics Customer Information Center for instructions before resuming use. · If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug it immediately, and contact an LG Electronics Customer Information Center. · Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for such a period, before using the appliance, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time. · Do not reach into the washer if the tub or drum, agitator, or any interior parts are moving. Before loading, unloading, or adding items, press Start/Pause and allow the tub or drum to coast to a complete stop before reaching inside. · This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. · Do not allow children or pets to play on, in or with the appliance. Close supervision is necessary when the appliance is used near children or pets. · Keep laundry products out of children’s reach. To prevent injury to persons, observe all warnings on product labels. · Repair or immediately replace all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. · Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet. · Do not use an extension cord or adapter with this appliance. · Do not grasp the power cord or touch the appliance controls with wet hands. · Do not modify or extend the power cord. · If the electrical supply cord is damaged, it must only be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. · Do not put oily or greasy clothing, candles or flammable materials on top of the appliance. · Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags, etc.), gasoline, chemicals and other flammable vapors and liquids.

ENGLISH

us_main.book.book Page 5 Thursday, June 9, 2022 1:51 PM
IMPORTANT SAFETY INSTRUCTIONS 5
· Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
· Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package directions when using laundry products. Incorrect usage can produce poisonous gas, resulting in serious injury or death.
· Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.
· Do not wash laundry that has been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, vegetable or cooking oil, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
· Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.
· In the event of a gas leak (propane gas, LP gas, etc.), do not operate this or any other appliance. Open a window or door to ventilate the area immediately.
· Do not tamper with controls. · Fix the drain hose securely in place to avoid flooding. · Do not abuse, sit on, or stand on the door of the appliance. · Always check the inside of the appliance for foreign objects. · Do not allow water, bleach or other liquids to sit in the drum for extended periods. Doing so can corrode
the drum or cause mildew or odors. · Do not dry unwashed items in the appliance.
Maintenance
· Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this owner’s manual. Use only authorized factory parts.
· Disconnect this appliance from the power supply before cleaning and attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply.
· Remove any dust or foreign matter from the power plug pins. · Do not disassemble or repair the appliance by yourself. · Remove the door before the appliance is removed from service or discarded to avoid the danger of
children or small animals getting trapped inside. · Make sure the dispenser drawer or lid is closed at all times when not being filled with laundry products.
Grounding Instructions
· Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
· The appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

us_main.book.book Page 6 Thursday, June 9, 2022 1:51 PM
6 IMPORTANT SAFETY INSTRUCTIONS
CAUTION STATEMENTS
CAUTION
· To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following:
Installation
· Install the product on a firm and level floor.
Operation
· Do not place objects on top of the appliance. · Turn off the water faucets and unplug the appliance if the appliance is to be left for an extended period
of time, such as during vacations. · ALWAYS follow the fabric care instructions supplied by the garment manufacturer. · Use fabric softeners or products to eliminate static only as recommended by the manufacturer. · Do not combine laundry products for use in one load unless specified on the label. · Do not touch draining water which may be hot. · If the drain hose and the water inlet hose are frozen in winter, defrost them before using the appliance. · Do not store or spill liquid detergents, cleaners, or bleaches (chlorine bleach, oxygen bleach) on the
appliance. Doing so may result in corrosion, discoloration or damage to the surface of the appliance. · Clothing or articles that are waterproof or water- resistant must be washed in the Waterproof, Bedding,
Bulky/Large, or Jumbo Wash cycle only. (Examples include water resistant clothing, mattress covers, outdoor clothes, and plastic mats.) Failure to do so may result in personal injury or damage to the washer, clothes, walls, floor, and surrounding objects due to abnormal vibration.
SAVE THESE INSTRUCTIONS

ENGLISH

us_main.book.book Page 7 Thursday, June 9, 2022 1:51 PM

PRODUCT OVERVIEW

PRODUCT OVERVIEW 7

Product Features
The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes.
WARNING · For your safety and for extended product life, use only authorized components. The manufacturer is not
responsible for product malfunction, property damage or bodily injury caused by the use of separately purchased unauthorized components, parts, or non-LG products.

Front View

Rear View

a Control Panel b Detergent Dispenser Drawer (ezDispense/
Manual Dispense) c Door d Drain Pump Filter e Drain Hose f Drain Pump Filter Cover g Leveling Feet h Door Seal i Drum

a Water Inlets b Shipping Bolts c Power Cord d Drain Hose

us_main.book.book Page 8 Thursday, June 9, 2022 1:51 PM
8 PRODUCT OVERVIEW
Accessories
Included Accessories
a Non-skid Pads b Hole Caps c Wrench d Tie Strap e Elbow Bracket (for securing drain hose) Required Accessories (sold separately)

Product Specifications

Model
Electrical Requirements
Min. / Max. Water Pressure
Dimensions (Width X Height X Depth)
Maximum Depth with Door Open
Net Weight
Max. Spin Speed

WM6700H*A
120 V~, 60 Hz
20 psi – 120 psi (138 kPa – 827 kPa)
27” X 39″ X 33 1/4”’ (70 cm X 99 cm X 84 cm)
55” (139.6 cm)
209.5 lb (95 kg) 1300 RPM

a Hot and Cold Water Hoses Optional Accessories (sold separately)

a Pedestal
b Pedestal Washer
c Stacking Kit
Check the width of the pedestal before purchasing to make sure that it matches the width of your appliance (27″ (70 cm) or 29″ (74 cm)).

ENGLISH

us_main.book.book Page 9 Thursday, June 9, 2022 1:51 PM

INSTALLATION

INSTALLATION 9

Before Installing

Installation Overview
Please read the following installation instructions first after purchasing this washer or transporting it to another location.

a

b

c

e

f

a Choosing the Proper Location b Unpacking and Removing Shipping Material c Connecting the Inlet Hoses d Connecting the Drain Hose e Leveling the Washer f Final Installation Check

WARNING
· Moving or installation of the appliance requires two or more people. Failure to follow these instructions may result in injury.
· Store and install the appliance where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to follow this warning can cause product or part failure, serious injury, fire, electric shock, or death.
· Properly ground the washer to conform with all governing codes and ordinances. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
· To ensure proper airflow, do not block the large opening on the bottom of the washer with carpeting or other materials.
· Do not remove the ground prong from the power cord. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

us_main.book.book Page 10 Thursday, June 9, 2022 1:51 PM
10 INSTALLATION
WARNING · Certain internal parts are intentionally not grounded and may present a risk of electric shock only during
servicing. Service personnel- Do not contact the following parts while the appliance is energized: pump, valve, motor, control board.

Tools Needed

· It is the personal responsibility and obligation of the washer owner to have a proper outlet installed by a qualified electrician.

a Pliers
b Flat-Blade Screwdriver
c Level
Choosing the Proper Location
Check the following requirements for the install location before installing the washer.
· Allow for sufficient space between the walls and the washer for installation.
· Make sure that the floor is clean, dry and free of dust, dirt, water and oil so the leveling feet cannot slide easily. Leveling feet that can move or slide on the floor can contribute to excess vibration and noise.
· If the floor has too much flex, reinforce it to make it more rigid. If the floor is not solid, it may cause severe vibration and noise.
· If a drain pan must be used, take extra care to follow the instructions provided with the drain pan and make sure the leveling feet are adjusted for firm and even contact with the pan. Use of drain pans and failure to properly level the washer may result in increased vibration and noise during operation.
Power Outlet
· The power outlet must be within 60 inches (1.5 m) of either side of the washer.
· Position the washer so that the outlet and plug are easily accessible.
· Do not overload the outlet with more than one appliance.
· The outlet must be grounded in accordance with current electrical wiring codes and regulations.
· Use a time-delay fuse or circuit breaker.

Flooring
· To minimize noise and vibration, install the washer on a level, solidly constructed floor capable of supporting the washer without flexing or bouncing.
· The washer must be installed on firm flooring to minimize vibration during the spin cycle. Concrete flooring is best, but a wood floor is sufficient, provided it is built to FHA standards.
· The floor under the washer must not slope more than 1 inch (2.5 cm) from front to back or side to side.
· Installing on carpeting and soft tile surfaces is not recommended.
· Never install the washer on a platform or weakly supported structure.

Floor Installation To ensure sufficient clearance for water inlet hoses, drain hose and airflow, allow minimum clearances of at least 1 inch (2.5 cm) at the sides and 4 inches (10 cm) behind the washer. Be sure to allow for wall, door, or floor moldings that may increase the required clearances.

A

G

C B

DE

F

E

Dimensions and Clearances

A

24 3/4” (62.6 cm)

B

55” (139.6 cm)

C

33 1/4” (84 cm)

D

4” (10 cm)

E

1” (2.5 cm)

ENGLISH

us_main.book.book Page 11 Thursday, June 9, 2022 1:51 PM

Dimensions and Clearances

F

27” (70 cm)

G

1/4” (0.5 cm)

Stacking or Pedestal Installation The washer can be stacked under a dryer or on top of a pedestal or pedestal washer.
F

E

INSTALLATION 11
Unpacking Shipping Material
Some models do not ship with drum support.
Lift the washer off the foam base.
· After removing the carton and shipping material, lift the washer off the foam base.
· Make sure the plastic drum support a comes off with the base and is not stuck to the bottom of the washer.
· If you must lay the washer down to remove the carton base b, always protect the side of the washer and lay it carefully on its side. Do not lay the washer on its front or back.

A

BC

D

C

Dimensions and Clearances

A

33 1/4″ (84 cm)

B

4” (10 cm)

C

1” (2.5 cm)

D

27” (70 cm)

E

77 1/2” (196.8 cm)

F

1/4” (0.5 cm)

NOTE
· Refer to the instructions packaged with the optional pedestal kit before stacking appliance on pedestal.
· Do not use a drain pan with a pedestal or pedestal washer installation as it can block the drawer. Using a drain pan may result in increased vibration and noise during operation.

• Removing Shipping Material
  1 Remove the bolt assemblies.
  · Starting with the bottom two shipping bolts c , use the included wrench to fully loosen all 4 shipping bolts by turning them counterclockwise.
  · Remove the bolt assemblies (bolts and retainers) by wiggling them slightly while pulling them out.

Unpacking and Removing Shipping Material
Remove all shipping materials from the washer for proper operation and inspect it for shipping damage.
CAUTION · Failure to remove shipping materials can cause
excessive noise and vibration.

2 Install the hole caps.
· Locate the hole caps d included in the accessory pack or attached to the back of

us_main.book.book Page 12 Thursday, June 9, 2022 1:51 PM

12 INSTALLATION
the washer. Install the caps in the holes left by the bolt assemblies.
CAUTION · Once removed, save the bolt assemblies for
future use. To prevent damage to internal components, do not transport the washer without reinstalling the shipping bolts. Failure to remove shipping bolts and retainers may cause severe vibration and noise, which can lead to permanent damage to the washer.
NOTE · The power cord is secured to the back of the
washer with a shipping bolt to help prevent operation with shipping bolts in place.
Connecting the Water Inlet Hoses
To avoid the risk of costly water damage, purchase and install new water inlet hoses when installing the washer.
WARNING · Do not overtighten the hoses or cross-thread the
hose fittings. Overtightening or cross-threading can damage the valves or couplings, resulting in leaking and property damage. · Do not reuse old hoses. Use only new hoses when installing the washer. Old hoses could leak or burst causing flooding and property damage. Contact an LG Customer Information Center for assistance in buying hoses.

· Water supply pressure must be between 20 psi and 120 psi (138 – 827 kPa). If the water supply pressure is more than 120 psi, a pressure reducing valve must be installed.
· Your hot water heater should be set to deliver water at 120­135 °F (48­57 °C) to allow the washer to properly control wash temperatures.
· Do not store or install the washer in a location subject to freezing temperatures. Damage to the water inlet hoses and internal mechanisms of the washer can result. If the washer was exposed to freezing temperatures prior to installation, allow it to stand at room temperature for several hours before use and check for leaks prior to operation.
· Do not use flood-preventing hoses with auto shut off devices. The devices can be tripped during fill and prevent the washer from filling properly.
How to Connect the Water Inlet Hoses
1 Check the fittings and seals. Inspect the
threaded fitting on each hose and make sure there is a rubber seal a in place in both ends of each hose to prevent leaking.
2 Connect the water supply hoses.
· Connect the water inlet hoses to the hot and cold water faucets tightly by hand and then tighten another 2/3 turn with pliers.
· Connect the blue hose to the cold water faucet and the red hose to the hot water faucet.

NOTE
· Periodically check the hoses for cracks, leaks, and wear, and replace the hoses every five years.
· Do not stretch the water hoses intentionally, and make sure that they are not pinched, crushed or kinked by other objects.

3 Flush out the inlet hoses.
· After the hoses are connected, turn on the water faucets and flush out any foreign substances such as dirt, sand, or sawdust.

ENGLISH

us_main.book.book Page 13 Thursday, June 9, 2022 1:51 PM

· Let the water drain into a bucket, and check the water temperature to make sure you’ve connected the hoses to the correct faucets.

INSTALLATION 13
beyond 66″ (168 cm), the drain function will be increasingly affected.
· Never create an airtight seal between the hose and the drain with tape or other means. If no air gap is present, water can be siphoned out of the drum resulting in poor wash/rinse performance or clothing damage.

4 Attach the inlet hoses to the back of the
washer.
· Attach the hot water inlet hose to the hot water inlet on the back of the washer. Attach the cold water inlet hose to the cold water inlet on the back of the washer.
· Tighten the fittings securely. Turn on both faucets all the way and check for leaks at both ends of the hoses.

Using a Standpipe to Drain
1 Clip the end of the hose into the elbow
bracket. · Connect the elbow bracket a within 4
inches (10 cm) of the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer.
4 ” (10 cm)

2 Insert the end of the drain hose into the
standpipe.

Connecting the Drain Hose
Connect the drain hose to either a standpipe or laundry tub.
WARNING · The drain hose should always be properly
secured. Failure to properly secure the drain hose can result in flooding and property damage.

3 Use the provided tie strap b to secure the
drain hose in place.

NOTE
· The drain must be installed in accordance with any applicable local codes and regulations.
· Make sure that the drain hose is not stretched, pinched, crushed, or kinked.
· The end of the drain hose should be located a minimum of 24″ (61 cm) and a maximum of 96″ (244 cm) above the bottom of the washer.
· For best results, locate the end of the drain hose no higher than 66″ (168 cm) above the bottom of the washer. As the drain outlet is raised

4 If the water valves and drain are built into the
wall, fasten the drain hose to one of the water

us_main.book.book Page 14 Thursday, June 9, 2022 1:51 PM

14 INSTALLATION
hoses with the provided tie strap c (ribbed side on inside).

24 – 96 ” (61 – 244 cm)

24 – 96 ” (61 – 244 cm)

Using the Laundry Tub to Drain
1 Clip the end of the hose into the elbow
bracket.
· Connect the elbow bracket a within 4 inches (10 cm) of the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer.

Leveling the Washer
The drum of the washer spins at very high speeds. To minimize vibration, noise, and unwanted movement, the floor must be a solid, level surface.
CAUTION · Using the washer without leveling it may cause
excess vibration and noise, leading to a washer malfunction. · Adjust the leveling feet only as far as necessary to level the washer. Extending the leveling feet more than necessary can cause the washer to vibrate.
NOTE · Before installing the washer, make sure that the
floor is clean, dry and free of dust, dirt, water and oil so the washer feet cannot slide easily. Feet that move or slide on the floor can contribute to excessive vibration and noise.

4 ” (10 cm)
2 Hang the end of the drain hose over the side
of the laundry tub.

How to Level the Washer
1 Position the washer in its final location.
· Take special care not to pinch, strain, or crush the water and drain hoses. If you have a carpenter’s level a, you can use it to check that the washer is level. The slope beneath the washer should not exceed 1 inch, and all 4 leveling feet must rest firmly on the floor.

3 Use the provided tie strap to secure the drain
hose in place.

us_main.book.book Page 15 Thursday, June 9, 2022 1:51 PM
2 Adjust the leveling feet.
· Turn all 4 leveling feet in one direction to raise the washer or the other direction to lower it.

INSTALLATION 15
leveling feet, place them under the back leveling feet.

ENGLISH

a This side up b Remove backing

3 Check the level again.
· Push or rock the top edges of the washer gently to make sure the washer does not rock. If the washer rocks, readjust the leveling feet.

4 Recheck the washer’s levelness.
· Push or rock the top edges of the washer gently to make sure the washer does not rock. If the washer rocks, level the washer again.

4 Tighten the locknuts b
· Turn the locknuts counterclockwise and tighten them when the washer is level.
Using Non-Skid Pads
If you install the washer on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. If this occurs, install the nonskid pads under the leveling feet and adjust the level.
1 Clean the floor to attach the non-skid pads.
· Use a dry rag to remove and clean foreign objects or moisture. If moisture remains, the non-skid pads may slip.
2 Adjust the level after placing the washer in the
installation area.
3 Place the adhesive side c of the non-skid pad
on the floor. · It is most effective to install the non-skid
pads under the front leveling feet. If it is hard to place the pads under the front

Final Installation Check
Connecting to the Power Supply
Plug the washer into a 120 V, 60 Hz grounded 3prong outlet.
WARNING
· Do not use a worn or damaged power cord or power plug. Replace or repair it immediately. Failure to do so may result in death, fire, electric shock, or malfunction.
· Do not modify the power cord and plug provided with the appliance. Do not damage it when installing or moving the appliance. Doing so may result in death, fire, electric shock, or malfunction.
· Make sure that the appliance is grounded.
· Connect this appliance to a grounded outlet conforming to the rating prior to use. Failure to do so may result in fire, electric shock, or malfunction.
· Do not damage or cut off the ground prong of the power cord. Doing so may cause death, fire, electric shock, or product malfunction.
· Improper connection of the equipment grounding conductor can result in risk of electric shock. Check with a qualified electrician or service technician if you are in doubt as to whether the appliance is properly grounded. If the plug does not fit the outlet, have a proper outlet installed by a qualified electrician.
· The appliance and outlet must be positioned so that the plug is easily accessible.

us_main.book.book Page 16 Thursday, June 9, 2022 1:51 PM
16 INSTALLATION
WARNING · Do not use an adapter or extension cord. Doing
so may result in serious injury, fire, electric shock, or death. · For best performance, plug the appliance into its own individual outlet. This helps prevent overloading house wiring circuits which could cause a fire hazard from overheated wires. · If necessary, use a new, UL-listed extension cord with a 3-prong (grounding) plug rated at no less than the branch circuit. Do not use an extension cord longer than 3 feet. Failure to follow these warnings may result in serious injury, fire, electric shock, or death.
Testing the Washer
Check if the washer is properly installed and run a test cycle.
1 Load the washer with 6 thick bath towels
(approximately 6 pounds).
2 Press the Power button.
3 Turn the knob and select the Quick Wash
cycle.
4 Press the Start/Pause button to start the
wash cycle.
5 Make sure that water is supplied, that the
washer does not rock or vibrate excessively, and that it drains well during the spin cycle.
NOTE · If water leaks during water supply, see
Connecting the Water Inlet Hoses to connect them properly. · If the washer rocks and vibrates excessively, see Leveling the Washer to level it again. · If the drain does not work, see Connecting the Drain Hose to install the hose properly.

us_main.book.book Page 17 Thursday, June 9, 2022 1:51 PM

ENGLISH

OPERATION

OPERATION 17

Before Use

WARNING
· To reduce the risk of fire, electric shock, or injury to persons, read the SAFETY INSTRUCTIONS before operating this appliance.

Operation Overview
1 Sort laundry and load the washer.
· Sort laundry by fabric type, soil level, color and load size as needed. Open the door and load items into the washer.
· If using single-use detergent packs, or gel or tablet detergents, place them in the drum before loading the laundry.
2 Add cleaning products.
· Fill the larger ezDispense reservoir with HE (High-Efficiency) liquid detergent. Fill the smaller reservoir with liquid fabric softener, if desired.
· Use the front detergent compartment of the manual dispenser for liquid or powdered detergent, or oxygen-based bleach. Place liquid chlorine bleach ONLY in the bleach compartment at the back of the manual dispenser.
· Do not place liquid or powdered detergent packs, or gel or tablet detergents in the dispenser.
3 Turn on the washer.
· Press the Power button to turn on the washer.
4 Select a cycle.
· Turn the cycle selector knob until the desired cycle is selected and press the 8(OK) button.
· The preset wash temperature, spin speed, soil level and option settings for the selected cycle are shown.
· The Normal cycle must be selected in order to change its default settings. · Pressing the Start/Pause button without selecting a cycle immediately starts the Normal cycle with
the default settings.
5 Adjust settings.
· Default settings for the selected cycle can be changed, if desired, using the cycle modifier and option buttons.
· Not all modifiers and options are available on all cycles. A different chime sounds and the LED does not light up if the selection is not allowed.
6 Begin cycle.
· Press the Start/Pause button to begin the cycle. The door locks, and the washer agitates briefly without water to measure the weight of the load.
· If the Start/Pause button is not pressed within a certain time, the washer shuts off and all settings are lost.

us_main.book.book Page 18 Thursday, June 9, 2022 1:51 PM
18 OPERATION
7 End of cycle.
· When the cycle is finished, a melody sounds. Immediately remove the clothing from the washer to reduce wrinkling.
· Check around the door seal when removing the load for small items that may be caught in the seal.
NOTE · The washer rotates the laundry in a way that allows it to use less water while still fully saturating the
clothing. It is normal to be unable to see water during the wash cycle. · If the temperature or the water level inside the machine is too high, the door will not unlock when the
Start/Pause button is pressed, and the Add Garments function will not be available (on applicable models). To stop a cycle and drain the water completely, turn the power off, then on, and then select Quick Wash.

Loading the Washer
General Tips
· Check and empty pockets. Paper clips, coins, matches, and other items can damage clothing and the washer.
· Close zippers and hooks, and tie drawstrings to prevent snagging or tangling of clothes.
· Pretreat heavily stained areas for best results.
· Brush off heavy soil, dust, and hair from items before washing. Excess dirt or sand can abrade other fabrics and lead to poor wash performance.
· For best performance, load clothes as shown.

CAUTION · Clothing or articles that are waterproof or water-
resistant must be washed in the Waterproof, Bedding, Bulky/Large, or Jumbo Wash cycle only. (Examples include water resistant clothing, mattress covers, outdoor clothes, and plastic mats.) Failure to do so may result in personal injury or damage to the washer, clothes, walls, floor, and surrounding objects due to abnormal vibration.
Bulky Items
· Wash thick, bulky items individually. Heavy blankets, comforters, bedspreads, or pet beds can get tangled or cause an unbalanced load if combined with other items.

– Do not press down on items while stacking them in the drum.
– Load clothes loosely, and do not overfill the drum. Clothes need room to circulate in order to get clean.
· Combine large and small items in the drum. Load large items first. Large items should not be more than half of the total load.
· The washer can be fully loaded, but the drum should not be tightly packed with items. The door of the washer must close easily.
· The washer will not fill or operate with the door open.

Small Items
· Do not wash a single small item. Add enough similar items to the load to prevent an out-ofbalance load.
· Wash small, light items in a mesh bag. Small items can get caught in the impeller at the bottom of the drum, and brassiere hooks can snag on other clothing or the drum.
Additional Operation Information
The complete owner’s manual can be found on the LG website at: http://gscs- manual.lge.com/

us_main.book.book Page 19 Thursday, June 9, 2022 1:51 PM
Total/DFZ/NA/FL/FX/main.html or by scanning the QR code.

OPERATION 19

ENGLISH

· Sorting Laundry · Adding Cleaning Products · Control Panel · Wash Cycles · Cycle Modifiers · Options and Extra Functions
Adding Cleaning Products
Using the ezDispense Function
When the ezDispense function is turned on, the liquid detergent and softener are dispensed in the set amounts, at the appropriate time during the cycle. · A full detergent reservoir will last for about 18
standard cycles, with the drum filled about halfway. · The default settings are configured to dispense 1.5 oz (45 ml) of detergent and 1 oz (30 ml) of softener for 11 lb (5 kg) of normally soiled laundry. This can be changed using the Default Det. Dispense or Default Soft. Dispense setting. For more details, see “Additional Settings” in the More Options and Settings section.
1 Slowly slide the detergent dispenser drawer
out as far as it will go.

3 Pour the detergent and softener into their
respective reservoirs, up to the MAX line. · The ezDispense drawer has two reservoirs.
Put the liquid detergent into the larger reservoir and the fabric softener into the smaller reservoir. · Use only liquid HE detergents in the ezDispense detergent reservoir. · Do not put liquid or powdered bleach, or powdered, gel or sheet type detergents into the ezDispense reservoirs. · Remove any residual detergent on the outside of the ezDispense drawer before inserting it. · Do not try to fill the reservoirs too quickly. Add detergent and softener slowly to avoid overflows.
4 After filling the reservoirs, insert the lids and
turn them to the right until they are tightly closed. · Securely close the lids to the ezDispense
reservoirs to minimize airflow which can harden cleaning products and prevent them from dispensing properly. Be careful not to lose the lids.

a Liquid fabric softener reservoir b Main wash liquid detergent reservoir
2 Turn the lids on the ezDispense reservoirs to
open them.

5 Close the dispenser drawer slowly before
starting the cycle.
· Slamming the drawer closed may result in the detergent overflowing into another compartment or dispensing into the drum earlier than programmed.
· Be careful not to get a hand caught in the drawer while closing.
· It is normal for a small amount of water to remain in the manual dispenser compartments at the end of the cycle.

us_main.book.book Page 20 Thursday, June 9, 2022 1:51 PM

20 OPERATION
CAUTION · Slide the detergent dispenser drawer out or in
slowly and use both hands for safety. Failure to do so can damage the washer or cause the detergent or softener to leak out of the ventilation holes. · Detergent or fabric softener left in the ezDispense reservoirs for an extended period may harden and fail to dispense properly. · Do not remove the dispenser drawer while the product is in operation. · Remove detergent/softener in the ezDispense reservoirs before moving the washer.
Using the Manual Dispense Function
Add detergent and bleach to the manual dispenser.
1 To turn off the automatic dispensers, press
the Options button.

5 Load the laundry products into the
appropriate manual dispenser compartments.
· Use the main wash detergent compartment at the front of the manual dispenser for powdered or liquid detergent or oxygenbased bleach. Do not use it for liquid chlorine bleach.
· Do not place detergent sheets in the manual dispenser.
· Place liquid chlorine bleach ONLY in the compartment at the rear of the manual dispenser.
· If using single-use detergent packs, place the pack in the drum before loading the laundry. Do not place liquid or powdered detergent packs in the dispenser.

2 Turn the knob to select Detergent Level or
Softener Level and press the 8(OK) button.
3 Turn the knob to select Off and press the
8(OK) button.
4 Open the detergent dispenser drawer.

a Liquid chlorine bleach compartment
b Manual main wash detergent compartment
6 Close the detergent dispenser drawer slowly
before starting the cycle. · Slamming the detergent dispenser drawer
may result in the detergent overflowing into another compartment or pouring into the tub earlier than programmed.
CAUTION · Do not place or store laundry products, such as
detergent, bleach, or liquid fabric softener, on top of your washer. These products can damage the washer’s finish and controls.

NOTE
· The manual dispenser cannot be used for prewash detergent dispensing.

us_main.book.book Page 21 Thursday, June 9, 2022 1:51 PM
Manual Main Wash Detergent Compartment
This compartment holds laundry detergent for the main wash cycle. Either powdered or liquid detergent may be used in this compartment. · The detergent is added to the load at the
beginning of the cycle. Always use HE (HighEfficiency) detergent with your washer. · Liquid or powdered color-safe bleach may be added to the manual main wash compartment with detergent of the same type. Do not mix liquids and powders · If you use a detergent that does not dissolve easily or a detergent with high viscosity, it will leave a residue and clog the dispenser.
Liquid Bleach Compartment
This compartment holds liquid bleach, which is dispensed automatically at the proper time during the wash cycle. The dispenser is activated twice to ensure complete dispensing of the bleach. Any liquid remaining in the dispenser at the end of the cycle is water, not bleach.
WARNING · Do not mix chlorine bleach with ammonia or
acids such as vinegar or rust/scale remover. Mixing chemicals like these can produce a lethal gas, resulting in severe injury or death.
NOTE · Do not add powdered bleach to this
compartment. The bleach compartment is designed to dispense liquid chlorine bleach only. Powdered or liquid color-safe bleach will not dispense properly. · Follow the manufacturer’s recommendations when adding bleach. Never add more than one cup, and do not exceed the maximum fill line or the bleach may be dispensed immediately and damage fabrics. Using too much bleach can also damage fabrics. · Never pour undiluted liquid chlorine bleach directly onto the load or into the drum. Fabric damage can occur. · Do not use color-safe bleach or oxygen bleach in the same cycle with liquid chlorine bleach.

OPERATION 21

ENGLISH

us_main.book.book Page 22 Thursday, June 9, 2022 1:51 PM

22 SMART FUNCTIONS
SMART FUNCTIONS
Using LG ThinQ Application
The LG ThinQ application allows you to communicate with the appliance using a smartphone.
LG ThinQ Application Features
For the product that contains the Wireless LAN module
· Remote Start – Control the appliance remotely from the LG ThinQ application.
· Downloaded – Download new and specialized cycles that are not included in the standard cycles on the appliance.
· Tub Clean Coach – Find out how many cycles remain before it is time to run the Tub Clean cycle.
· Energy Monitoring – Keep track of the washer’s power consumption and how it is affected by your selected wash cycles and options.
· Smart DiagnosisTM – This function provides useful information for diagnosing and solving issues with the appliance based on the pattern of use.
· Push Alerts – When the cycle is complete or the appliance has problems, you will receive a push message.
· Settings – Set various options on the appliance and in the application.
NOTE · If you change your wireless router, Internet
service provider, or password, delete the connected appliance from the LG ThinQ application and connect it again. · This information is current at the time of publication. The application is subject to change for product improvement purposes without notice to users.

Installing LG ThinQ App and Connecting an LG Appliance
Models with QR Code
Scan the QR code attached to the product using the camera or a QR code reader app on your smartphone.
Models without QR Code
1 Search for and install the LG ThinQ app from
the Google Play Store or Apple App Store on a smartphone.
2 Run the LG ThinQ app and sign in with your
existing account or create an LG account to sign in.
3 Touch the add (~) button on the LG ThinQ
app to connect your LG appliance. Follow the instructions in the app to complete the process.
NOTE · You may be asked to provide a password to
connect to the LG network (not your home network) during the Wi-Fi setup. The password is the last 4 characters of the network name, repeated twice, with no spaces. For example, if the network name appears as LG_XXXX_8b92, then you would enter 8b928b92 as your password. The password is case sensitive and the last 4 characters are unique to your appliance.
· To verify the Wi-Fi connection, check that the f
icon on the control panel is lit. · The appliance supports 2.4 GHz Wi-Fi networks
only. To check your network frequency, contact

us_main.book.book Page 23 Thursday, June 9, 2022 1:51 PM

ENGLISH

your Internet service provider or refer to your wireless router manual.
· LG ThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.
· If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.
· The Wi-Fi connection may not connect or may be interrupted because of the home network environment.
· The network connection may not work properly depending on the Internet service provider.
· The surrounding wireless environment can make the wireless network service run slowly.
· If the appliance cannot be registered due to problems with the wireless signal transmission, unplug the appliance and wait about a minute before trying again.
· If the firewall on your wireless router is enabled, disable the firewall or add an exception to it.
· The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
· Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer.
· If the security protocol of the router is set to WEP, network setup may fail. Change the security protocol (WPA2 is recommended) and connect the product again.
Using the Appliance Remotely
Remote Start
Use a smartphone to control your appliance remotely. You can also monitor your cycle operation so you know how much time is left in the cycle.
Using Remote Start
1 Put the laundry in the drum. If using the
manual dispenser, add detergent to the detergent dispenser drawer. If using ezDispense, make sure that there is sufficient detergent and softener in the reservoirs.
· If desired, add bleach to the appropriate section of the manual dispenser.

SMART FUNCTIONS 23
2 Press the Power button.
3 Press the Options button, turn the knob to
select Remote Start and press the 8(OK)
button.
4 Turn the knob to select On and press the
8(OK) button to enable the remote control
function.
5 Start a cycle from the LG ThinQ application on
your smartphone.
NOTE · Once this function is enabled, you can only start
a cycle from the LG ThinQ smartphone application. If the cycle is not started, the appliance will wait to start the cycle until it is turned off remotely from the application or the remote function is disabled. · If the door has been opened, you cannot start a cycle remotely.
Disabling Remote Start Manually When the function is activated, press the Options button, turn the knob to select Remote Start and
press the 8(OK) button. Turn the knob to select Off and press the 8(OK) button.
Download Cycle
You can download new and specialized cycles that are not included in the standard cycles on the appliance. Appliances that have been successfully connected can download a variety of specialty cycles specific to the appliance. Once cycle download is completed in the appliance, the product keeps the downloaded cycle until a new cycle is downloaded.
NOTE · Only one downloaded cycle can be stored on the
appliance at a time.

us_main.book.book Page 24 Thursday, June 9, 2022 1:51 PM

24 SMART FUNCTIONS

Radio Equipment Specifications
To identify RF module installed in the appliance, refer to the label attached to the appliance.

Type
Wireless LAN
Bluetooth

Frequency Range 2412 – 2462 MHz 2402 – 2480 MHz

Output Power (Max)
< 30 dBm

FCC Notice
The following notice covers the transmitter module contained in this product.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and the receiver.
· Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.
Industry Canada Statement
This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body.
NOTE · THE MANUFACTURER IS NOT RESPONSIBLE FOR
ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

us_main.book.book Page 25 Thursday, June 9, 2022 1:51 PM

ENGLISH

Open Source Software Notice Information
To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that have the obligation to disclose source code, and to access all referred license terms, copyright notices and other relevant documents, please visit https:// opensource.lge.com.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected].
This offer is valid to anyone in receipt of this information for a period of three years after our last shipment of this product.
Smart DiagnosisTM Function
Use this feature to help you diagnose and solve problems with your appliance.
NOTE · For reasons not attributable to LGE’s negligence,
the service may not operate due to external factors such as, but not limited to, Wi-Fi unavailability, Wi-Fi disconnection, local app store policy, or app unavailability.
· The feature may be subject to change without prior notice and may have a different form depending on where you are located.

SMART FUNCTIONS 25
Using Audible Diagnosis to Diagnose Issues
Follow the instructions below to use the audible diagnosis method. · Launch the LG ThinQ application and select the
Smart DiagnosisTM feature in the menu. Follow the instructions for audible diagnosis provided in the LG ThinQ application.
1 Press the Power button to turn on the
appliance.
2 Press the Options button.
3 Turn the knob to select Additonal Settings
and press the 8(OK) button.
4 Turn the knob to select Smart Diagnosis and
press the 8(OK) button.
5 Place the mouthpiece of your smartphone
close to the Power button and press the
8(OK) button.
· Hold the smartphone mouthpiece to the Power button until the data transfer is complete.
1M0 amxm.

Using LG ThinQ to Diagnose Issues
If you experience a problem with your Wi-Fi equipped appliance, it can transmit troubleshooting data to a smartphone using the LG ThinQ application.
· Launch the LG ThinQ application and select the Smart DiagnosisTM feature in the menu. Follow the instructions provided in the LG ThinQ application.

6 After the data transfer is complete, the
washer will turn off.
NOTE · For best results, do not move the smartphone
while the tones are being transmitted.

us_main.book.book Page 26 Thursday, June 9, 2022 1:51 PM

26 MAINTENANCE
MAINTENANCE
WARNING · To reduce the risk of fire, electric shock, or injury
to persons, read this entire owner’s manual, including the SAFETY INSTRUCTIONS, before operating this appliance. · Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electric shock, or death. · Do not use volatile substances (benzene, paint thinner, alcohol, acetone, etc.), abrasive cleaners, or detergents with strong chemical components when cleaning the appliance. Doing so may cause discoloration or damage to the appliance, or may cause a fire. · Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel Do not contact the following parts while the appliance is energized: pump, valve, motor, control board.
Regular Cleaning
Care after Wash
After the cycle is finished, wipe the door and the inside of the door seal to remove any moisture. · Wipe the body of the washer with a dry cloth to
remove any moisture. · Leave the door open to dry the drum interior.
WARNING · Make sure children and pets do not climb into
the drum. Engage the Control Lock feature if needed to prevent children from accidentally starting a wash cycle.
Cleaning the Exterior
Proper care of your washer can extend its life.
Door: Wash with a damp cloth on the outside and inside and then dry with a soft cloth.
Exterior: · Immediately wipe off any spills.

· Wipe with a damp cloth.
· Do not touch the surface or the display with sharp objects.

Periodic Maintenance
· Use a towel or soft cloth to wipe around the washer door opening and door glass.
· Always remove items from the washer as soon as the cycle is complete. Leaving damp items in the washer can cause wrinkling, color transfer, and odor.
Cleaning the Drum
Over time, residue may build up in the drum, leading to mildew or a musty odor. Run the Tub Clean cycle monthly to remove residue and prevent odor.
NOTE · Make sure to run the Tub Clean cycle only when
the drum is empty. Never load laundry while using this cycle. The laundry may be damaged or contaminated with cleaning products.
· Run the cycle more often under heavy use conditions or if odor is already present.
· If mildew or musty smell already exists, run this cycle once a week for three consecutive weeks.

1 Remove any clothing from the drum.

2 Add cleaning agents.

Cleaner

Instructions

Drum cleaner
Lime scale remover

Add to main detergent compartment of detergent dispenser

Liquid chlorine bleach

Add to bleach compartment of detergent dispenser.

Powdered cleaner

Pull out liquid detergent cup before adding to main detergent compartment

Cleaning tablets

Place directly into the washer drum.

· For other drum cleaning products, follow the cleaner manufacturer’s instructions and recommendations.

ENGLISH

us_main.book.book Page 27 Thursday, June 9, 2022 1:51 PM

· Do not exceed the maximum fill line when adding bleach or powdered cleaners. Powdered cleaners may remain in the drum after cleaning.
3 Close the door and press the Power button.
4 Select the Tub Clean cycle and press the
Start/Pause button to begin the cycle.
5 After the cycle ends, open the door and allow
the drum interior to dry completely.
WARNING · Make sure children and pets do not climb into
the drum. Engage the Control Lock feature if needed to prevent children from accidentally starting a wash cycle.
NOTE · If you use a descaler or drum cleaner during the
Tub Clean cycle, use the Rinse+Spin option to rinse the washer drum before running your next wash cycle.

MAINTENANCE 27
Cleaning the ezDispense Drawer
Remove and clean the ezDispense reservoir every time you refill the detergent/softener or change to a new type of detergent/softener. Remove and clean the detergent dispenser drawer once or twice a month. Leaving detergent in the detergent dispenser drawer for an extended period or using the washer for a long time may cause the build-up of residue in the detergent dispenser drawer.
WARNING · Do not spray water inside the washer. Doing so
may cause fire or electric shock.
1 Turn off the washer, and unplug the power
cord.
2 Pull out the dispenser drawer until it stops,
and then press down the disengage button to completely remove the drawer.

Removing Mineral Buildup
In areas with hard water, mineral scale can form on internal components of the washer. Periodically clean the mineral buildup on the internal components to extend the lifespan of the washer. Use of a water softener is recommended in areas with hard water.
· Use a descaler to remove visible mineral buildup on the washer drum.
· After descaling, always run the Tub Clean cycle before washing clothing.
· Mineral scale and other spots may be removed from the stainless steel drum using a soft cloth soaked in stainless steel cleaner.
· Do not use steel wool or abrasive cleaners.
Leaving the Door Open
After you finish using the washer, leave the door open overnight to allow air to circulate and dry the drum. This helps prevent odors.

3 Remove the ezDispense reservoirs from the
drawer, and open the reservoirs lids. · Rinse the drawer in warm water to dissolve
the detergent or softener scale.
4 Clean the outsides of the ezDispense
reservoirs and inserts with warm water. · Use a soft cloth or brush to remove any
residue. · Do not use soap when cleaning the drawer
and inserts.

us_main.book.book Page 28 Thursday, June 9, 2022 1:51 PM

28 MAINTENANCE
5 If the detergent or softener is hardened inside
the ezDispense reservoirs, remove the covers on the reservoirs, and clean the insides of the reservoirs with warm water.
· Use a soft cloth or brush to clean and to remove any residue.
· Do not use soap when cleaning the reservoirs.

1 Wear rubber gloves and protective goggles.
2 Dilute 3/4 cup (177 mL) of liquid chlorine
bleach in 1 gallon (3.8 L) of water.
3 Wipe around the door seal.
· Soak a sponge or a soft cloth in this diluted solution and wipe all around the door seal.

4 Wipe up any moisture with a dry towel or
cloth after cleaning.

5 Leave the door open to allow the door seal to
dry completely.

6 Securely close the covers on the ezDispense
reservoirs.
7 Wipe off any moisture with a dry towel or
cloth after cleaning.
8 Reassemble the reservoirs and reinstall the
dispenser drawer.

Cleaning the Water Inlet Filters
If the washer does not fill properly, an error message will appear on the display. The inlet valve filter screens could be clogged by hard water scale, sediment in the water supply, or other debris.
WARNING · The inlet screens protect the delicate parts of the
inlet valve from being damaged by particles that could enter the valves with the water supply. Operating the washer with these filters removed could cause a valve to open continuously, resulting in flooding and/or property damage.
CAUTION · Do not use the washer without the inlet filters.
Doing so will cause leaks and malfunction. · If you use the washer in an area with hard water,
the inlet filter may clog due to lime buildup and require more frequent cleaning.

Cleaning the Door Seal
Clean the door seal once a month to prevent build-up of dirt.
CAUTION · Cleaning the door seal with undiluted bleach
may cause malfunction of the door seal and washer parts. You must add water to the bleach before using it.

1 Turn off the washer, and unplug the power
cord.
2 Turn off hot and cold water faucets.
3 Unscrew the hot and cold water hoses from
the back of the washer.
4 Remove the filters from the water valves
carefully. · Use pliers to pull out the filters from the
water valves.

us_main.book.book Page 29 Thursday, June 9, 2022 1:51 PM

MAINTENANCE 29

ENGLISH

5 Remove foreign objects and soak the filters in
white vinegar or a lime scale remover.
· If using a lime scale remover, follow the manufacturer’s instructions. Be careful not to damage the filters while cleaning them.

3 Drain any remaining water.
· Unclip the drain hose and remove the plug from the drain hose to drain the remaining water.

6 Rinse filters thoroughly and press them back
into place.

7 Flush then reattach the water hoses.
· Before reattaching the water inlet hoses, flush them by running several gallons of water through them into a bucket or drain, preferably with the faucets wide open for maximum flow.
NOTE · An Water supply error message may appears
on the display when the water pressure is low or an inlet filter is clogged with dirt. Clean the inlet filter.

4 Remove the pump filter.
· Twist the pump filter counterclockwise to remove.

Cleaning the Drain Pump Filter
The washer fails to drain if the drain pump filter is clogged. Periodically clean the drain filter to prevent clogging with foreign objects.
WARNING · Opening the drain filter will result in water
overflowing if there is water in the drum. Use a bucket if the drum is not completely drained before you open the drain filter. · Using the washer without the drain filter or with an incorrectly assembled drain filter may cause leaks or malfunction of the washer.
1 Turn off the washer, and unplug the power
cord.
2 Open the drain pump filter cover.

5 Clean the pump filter and opening.
6 Reassemble the plug onto the drain hose and
reclip the drain hose.

us_main.book.book Page 30 Thursday, June 9, 2022 1:51 PM
30 MAINTENANCE

7 Insert the drain pump filter and twist it
clockwise.
8 Close the drain pump filter cover.
NOTE · An Drainage message appears on the display
when the drain pump filter is clogged with dirt. Clean the drain pump filter.
Care in Cold Climates
Storing the Washer
If the washer will not be used for an extended period of time and is in an area that could be exposed to freezing temperatures, follow these steps to protect the washer from damage. NOTE · Make sure the drum is empty before following
these steps.
1 Turn off the washer, and unplug the power
cord.
2 Turn off the water faucets. 3 Disconnect the water inlet hoses. Drain any
water from the hoses.

4 Plug the power cord into a properly grounded
electrical outlet.
5 Add 1 gallon of nontoxic recreational vehicle
(RV) antifreeze to the empty drum and close the door. · Never use automotive antifreeze.
6 Turn on the washer and press the Spin
button.
7 Press the Start/Pause button to start the
drain pump for 1 minute. · This will expel some of the antifreeze,
leaving enough to protect the washer from damage.
8 Turn off the washer and unplug the power
cord.
9 Dry the drum interior with a soft cloth, and
close the door.
10 Store the washer in an upright position.
11 Remove the inserts from the dispenser. Drain
any water in the compartments and let them dry.
12 To remove the antifreeze from the washer
after storage, run the Rinse+Spin cycle using detergent. · Do not add laundry to this cycle.
When the Water Inlet Hoses Are Frozen
1 Turn off the washer, and unplug the power
cord.

us_main.book.book Page 31 Thursday, June 9, 2022 1:51 PM
2 Turn off the faucets connected to the water
inlet hoses.
3 Pour hot water on the frozen faucets to thaw
the water inlet hoses and remove the water inlet hoses.
4 Immerse the water inlet hoses in hot water to
thaw them.
5 Reconnect the water inlet hoses to the water
inlets of the washer and to the faucets. · See Connecting the Water Inlet Hoses for
details.
6 Turn on the faucets.
7 Press the Power button to turn on the
washer.
8 Turn the knob to select Spin only cycle for
draining and spinning.
9 Press the Start/Pause button.
When the Drain Hose Is Frozen
1 Pour hot water in the washer drum and close
the door.
2 Wait for 1 – 2 hours.
3 Press the Power button.
4 Turn the knob to select Spin only cycle for
draining and spinning.
5 Press the Start/Pause button to make sure
the water drains.

MAINTENANCE 31

ENGLISH

us_main.book.book Page 32 Thursday, June 9, 2022 1:51 PM
32 TROUBLESHOOTING
TROUBLESHOOTING
Before Calling for Service
The washer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the washer does not function properly or does not function at all, check the following before you call for service.
FAQs
Q: Why does my washer make loud banging noises while it is filling with water?
A: This is actually a problem with the plumbing in your home. When the water valve in the washer shuts off, it can cause pipes in your home to move, resulting in a loud banging noise. This effect, called water hammer, can be reduced by installing an item called a water hammer arrestor. Add-on arrestors can be purchased through your local hardware or home improvement store.
Q: Why is there so little water in my washer? How can it clean the clothes?
A: HE (High-Efficiency) washers are designed to properly wash your laundry while using a minimum amount of water and energy. Because the water volume is low, the small amount of detergent used is more concentrated in the water, resulting in excellent cleaning performance.
Q: When I press a button, why does my washer beep and then nothing happens?
A: The Control Lock feature is turned on. To turn it off, press the Options button, turn the knob to
select Control Lock, and press the 8(OK) button. Select Off and press the 8(OK) button.
Q: Where should I pour powdered laundry products when doing my laundry?
A: If you are using powdered laundry detergent, load it in the manual detergent dispenser after removing the liquid detergent insert (where applicable). Powdered laundry agents or powdered color safe bleach should be put directly into the drum. These products can be put in the empty drum before loading or on top of the laundry after loading the washer.
Q: When should I change the default ezDispense amounts?
A: If you simply want to use a bit more or less detergent for a single load, press the Options button and select Detergent Level or Softener Level to adjust the level for that load. If you are using a highly concentrated detergent or would just like to use more or less detergent or softener for every load, see the instructions in the Default Det. Dispense or Default Soft. Dispense under Additional Settings.
Q: How do I calculate the correct default amount for my detergent?
A: Use the information on the detergent packaging. Divide the total number of fluid ounces in the container by the estimated number of loads for a medium or normal wash load. For example, if the bottle contains 100 fl. oz. and the package states that it washes 64 medium loads then 100/64 = 1.6 fl oz per load. If you generally use about half the manufacturer’s recommended amount, set the default to 0.8 fl oz. Do not set the ezDispense default for more than the maximum recommended amount (for full loads). For additional assistance calculating, use the LG ThinQ app.
Q: How do I use a special detergent for sportswear or hand washables?
A: Turn off the ezDispense function and use the manual dispenser.
Q: Can I use powdered detergent in the ezDispense reservoirs?
A: Use the manual dispenser for powdered detergents. Do not put powders in the ezDispense reservoirs.

us_main.book.book Page 33 Thursday, June 9, 2022 1:51 PM

ENGLISH

TROUBLESHOOTING 33

Error Messages

Problem Door open Door unlocked Water supply
Drainage Unbalance
No water detected Motor error Water too high

Possible Cause & Solution
The door is opened. · Open and close the door again. If the message keeps appearing, unplug the power cord
and call for service.
The door is not secured. · Check for objects around the door and door seal. If the message keeps appearing, unplug
the power cord and call for service.
Water supply faucets are not fully open. · Make sure that the water faucets are fully open.
Water inlet hoses are kinked, pinched, or crushed. · Make sure that the hoses are not kinked, pinched or crushed behind or under the washer.
Be careful when moving the washer during cleaning or maintenance.
Water inlet filters are clogged. · Clean the inlet filters. See MAINTENANCE.
Water supply pressure to faucet or house is too low. · Check another faucet in the house to make sure that household water pressure is
adequate and flow is not restricted. · Disconnect the water inlet hoses from the washer and run a few gallons of water through
the hoses to flush out any dirt. · If flow is too low, contact a plumber to have the water supply lines repaired.
Water supply connected with leak-limiting hoses. · The use of hoses designed to limit leaks is not recommended. Leak limiting hoses can trip
falsely and prevent the washer from filling.
Drain hose is kinked, pinched, or clogged. · Make sure that the drain hose is free of clogs or kinks and is not pinched behind or under
the washer.
The end of the drain hose is more than 96 inches (2.4 m) above the bottom of the washer. · Move the end of the drain hose so that it is lower than 96 inches (2.4 m).
The load is too small. · Add additional items to allow the washer to balance the load.
Heavy articles are mixed with lighter items. · Always try to wash articles of somewhat similar weight to allow the washer to evenly
distribute the weight of the load for spinning.
The load is out of balance. · Manually redistribute the load if articles have become tangled, preventing the automatic
rebalancing from working properly.
The water level sensor is not working correctly. · Close the water faucets, unplug the washer, and call for service.
A motor error has occurred. · Allow the washer to stand for 30 minutes and then restart the cycle. · If the error code is still displayed, call for service.
Water level is too high due to a faulty water valve. · Close the water faucets, unplug the washer, and call for service.

us_main.book.book Page 34 Thursday, June 9, 2022 1:51 PM

34 TROUBLESHOOTING

Problem

Possible Cause & Solution

Freeze error

Inlet hose, drain hose or drain pump is frozen. · See Care in Cold Climates.

No temp detected

Control error. · Unplug the washer and wait 60 minutes. Reconnect power and try again. · If the error code is still displayed, call for service.

Vibration sensor

Vibration sensor malfunctions. · Call for service.

Turbidity sensor

Turbidity sensor malfunctions. · Call for service.

Steam error

The steam function did not work properly. · Call for service.

Power failure

Power does not connected properly. · Press the Start/Pause button to restart the cycle

Oversudsing

Too much detergent was used. · Do not add more than the recommended amount of detergent.

Too much sudsing detected. · The washer will operate the suds reduction cycle for about 2 hours.

Voltage abnormality Abnormal voltage detected. · Unplug the power plug. If error recurs, call for service.

ezDispense Error Messages

Problem Check det. Tank
No detergent Check soft. Tank
No softener ezDispenseTM error Drawer open

Possible Cause & Solution
The amount of liquid detergent in the detergent reservoir did not decrease. After putting the detergent into the detergent reservoir, it was left for a long time and the detergent hardened. · Clean the detergent reservoir thoroughly, fill it with liquid detergent, install it in the
drawer, and run a wash cycle. If the error is displayed continuously, call for service.
The automatic detergent injection function does not work properly. · Call for service.
The amount of fabric softener in the softener reservoir did not decrease. After putting the fabric softener into the softener reservoir, it was left for a long time and the fabric softener hardened. · Clean the softener reservoir thoroughly, fill it with liquid fabric softener, install it in the
drawer, and run a wash cycle. If the error is displayed continuously, call for service.
The automatic softener injection function does not work properly. · Call for service.
The ezDispense did not work properly. · Call for service.
The washer was operated without completely closing the drawer. The drawer was opened during the washer operation. · Push the drawer completely closed. If the error is displayed continuously, call for service.

us_main.book.book Page 35 Thursday, June 9, 2022 1:51 PM

ENGLISH

TROUBLESHOOTING 35

Wi-Fi

Problem
Trouble connecting appliance and smartphone to Wi-Fi network

Possible Cause & Solution
The password for the Wi-Fi network was entered incorrectly.
· Delete your home Wi-Fi network and begin the connection process again.
Mobile data for your smartphone is turned on.
· Turn off the Mobile data on your smartphone before connecting the appliance.
The wireless network name (SSID) is set incorrectly.
· The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
The router frequency is not 2.4 GHz.
· Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and connect the appliance to the wireless router. To check the router frequency, check with your Internet service provider or the router manufacturer.
The appliance and the router are too far apart.
· If the appliance is too far from the router, the signal may be weak and the connection may not be configured correctly. Move the router closer to the appliance or purchase and install a Wi-Fi repeater.
LG ThinQ is asking for a password to connect to the product.
· If you are asked to provide a password to connect to the product (not to your home network) during the Wi-Fi setup, enter the last 4 characters of the network name, repeated twice, with no spaces. For example, if the network name appears as LG_XXXX_8b92, then you would enter 8b928b92 as your password. The password is case sensitive and the last 4 characters are unique to your appliance.

us_main.book.book Page 36 Thursday, June 9, 2022 1:51 PM

36 LIMITED WARRANTY
LIMITED WARRANTY

USA

TERMS AND CONDITIONS
ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG ELECTRONICS (“LG”) TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.
Should your LG Washer (“Product”) fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG will, at its option, repair or replace the Product. This limited warranty is valid only to the original retail purchaser of the Product (“You”) and applies only when purchased lawfully and used within the United States including U.S. Territories.

WARRANTY PERIOD

Washer

Direct Drive Motor (Stator or Rotor)

Stainless Steel Drum

Parts (internal/ functional parts only) and Labor: One (1) year from the date of original retail purchase

Parts Only: Ten (10) years from the date of original retail purchase You are responsible for any applicable labor cost.

Parts Only: Three (3) years from the date of original retail purchase You are responsible for any applicable labor cost.

· Replacement Products and parts are warranted for the remaining portion of the original warranty period or ninety (90) days, whichever is greater.
· Replacement Products and parts may be new, reconditioned, refurbished, or otherwise factory remanufactured.
· Replaced Product or part(s) will be the property of LG.
· Proof of original retail purchase specifying the Product model and date of purchase is required to obtain warranty service under this limited warranty. In the event of no proof of purchase, warranty start date will be ninety (90) days from the manufacture date.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THE PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THE ABOVE LIMITED WARRANTY. UNDER NO CIRCUMSTANCES SHALL LG OR ITS U.S. DISTRIBUTORS/DEALERS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST GOODWILL, LOST REVENUES OR PROFITS, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, COST OF REMOVAL AND REINSTALLATION OF THE PRODUCT, LOSS OF USE, OR ANY OTHER DAMAGES WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. LG’S TOTAL LIABILITY, IF ANY, SHALL NOT EXCEED THE PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

THIS LIMITED WARRANTY DOES NOT COVER:
· Service trips to i) deliver, pick up, or install, or; educate how to operate the Product;, ii) correct wiring;, or iii) correct unauthorized repairs or installations of the Product.
· Damage or failure of the Product to perform during power failures and interrupted or inadequate electrical service.

ENGLISH

us_main.book.book Page 37 Thursday, June 9, 2022 1:51 PM
LIMITED WARRANTY 37
· Damage or failure of the Product caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted water supply, or inadequate supply of air.
· Damage or failure of the Product resulting from operating the Product in a corrosive atmosphere, in an unsuitable environment, or otherwise contrary to the Product owner’s manual.
· Damage or failure of the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, pandemics, acts of nature, or any other causes beyond the control of LG.
· Damage or failure of the Product resulting from misuse, abuse, improper installation, repair, or maintenance, or service not approved by LG. Improper repair includes use of parts not authorized or specified by LG. Improper installation or maintenance includes installation or maintenance contrary to the Product’s owner’s manual.
· Damage or failure of the Product caused by unauthorized modification or alteration, any other property damage or failure resulting from any water leakage where the Product is not properly installed in accordance with the Product’s owner’s manual.
· Damage or failure of the Product caused by incorrect electrical current, voltage, or plumbing codes. · Damage or failure of the Product caused by use of parts, accessories, components, consumable cleaning
products, any other products, or service that are not authorized by LG. · Replacement of light bulbs, filters, fuses, or any other consumable parts. · Damage or failure of the Product caused by transportation, storage, and/or handling, including
scratches, dents, chips, and/or other damage to the finish of your Product, unless such damage is reported within one (1) week of delivery. · Damage or missing items to any display, open box, refurbished, or discounted Product. · Refurbished Product or any Product sold “As Is”, “Where Is”, “With all Faults”, or similar disclaimer. · Products with original serial numbers that have been removed, altered, or cannot be readily determined at the discretion of LG. · Increases in utility costs and additional utility expenses in any way associated with the Product. · Any noises associated with normal operation. · Products used for other than normal and proper household use, including, without limitation, commercial or industrial use or, use in offices, and recreational facilities or vehicles, or as otherwise outlined in the Product owner’s manual. · Costs associated with removal and/or reinstallation of your Product. · The removal and reinstallation of the Product if it is installed in an inaccessible location or is not installed in accordance with the Product owner’s manual. The cost of repair or replacement under the above excluded circumstances shall be borne by You. TO OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION Call 1-800-243-0000 and select the appropriate option from the menu. Or visit our website at http://www.lg.com Or by mail: LG Electronics, P.O. Box 240007, Huntsville, AL 35813 ATTN: Customer Service
PROCEDURE FOR RESOLVING DISPUTES:
ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION. BINDING ARBITRATION MEANS THAT YOU AND LG ARE EACH WAIVING THE RIGHT TO A JURY TRIAL AND TO BRING OR PARTICIPATE IN A CLASS ACTION. Definitions. For the purposes of this section, references to “LG” mean LG Electronics U.S.A., Inc., its parents, subsidiaries and affiliates, and each of their officers, directors, employees, agents, beneficiaries, predecessors in interest, successors, assigns and suppliers; references to “dispute” or “claim” shall include any dispute, claim or controversy of any kind whatsoever (whether based in contract, tort, statute, regulation, ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or relating in any way to the sale, condition or performance of the product or this Limited Warranty.

us_main.book.book Page 38 Thursday, June 9, 2022 1:51 PM
38 LIMITED WARRANTY
Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG Electronics, USA, Inc. Attn: Legal Department-Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632. You and LG agree to engage in good faith discussions in an attempt to amicably resolve your claim. The notice must provide your name, address, and telephone number; identify the product that is the subject of the claim; and describe the nature of the claim and the relief being sought. If you and LG are unable to resolve the dispute within 30 days, either party may proceed to file a claim for arbitration.
Agreement to Binding Arbitration and Class Action Waiver. Upon failure to resolve the dispute during the 30 day period after sending written notice to LG, you and LG agree to resolve any claims between us only by binding arbitration on an individual basis, unless you opt out as provided below. Any dispute between you and LG shall not be combined or consolidated with a dispute involving any other person’s or entity’s product or claim. More specifically, without limitation of the foregoing, any dispute between you and LG shall not under any circumstances proceed as part of a class or representative action. Instead of arbitration, either party may bring an individual action in small claims court, but that small claims court action may not be brought on a class or representative basis.
Arbitration Rules and Procedures. To begin arbitration of a claim, either you or LG must make a written demand for arbitration. The arbitration will be administered by the American Arbitration Association (“AAA”) and will be conducted before a single arbitrator under the AAA’s Consumer Arbitration Rules that are in effect at the time the arbitration is initiated (referred to as the “AAA Rules”) and under the procedures set forth in this section. The AAA Rules are available online at www.adr.org/consumer. Send a copy of your written demand for arbitration, as well as a copy of this provision, to the AAA in the manner described in the AAA Rules. You must also send a copy of your written demand to LG at LG Electronics, USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632. If there is a conflict between the AAA Rules and the rules set forth in this section, the rules set forth in this section will govern. This arbitration provision is governed by the Federal Arbitration Act. Judgment may be entered on the arbitrator’s award in any court of competent jurisdiction. All issues are for the arbitrator to decide, except that issues relating to the scope and enforceability of the arbitration provision and to the arbitrability of the dispute are for the court to decide. The arbitrator is bound by the terms of this provision.
Governing Law. The law of the state of your residence shall govern this Limited Warranty and any disputes between us except to the extent that such law is preempted by or inconsistent with applicable federal law.
Fees/Costs. You do not need to pay any fee to begin an arbitration. Upon receipt of your written demand for arbitration, LG will promptly pay all arbitration filing fees to the AAA unless you seek more than $25,000 in damages, in which case the payment of these fees will be governed by the AAA Rules. Except as otherwise provided for herein, LG will pay all AAA filing, administration and arbitrator fees for any arbitration initiated in accordance with the AAA Rules and this arbitration provision. If you prevail in the arbitration, LG will pay your attorneys’ fees and expenses as long as they are reasonable, by considering factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the foregoing, if applicable law allows for an award of reasonable attorneys’ fees and expenses, an arbitrator can award them to the same extent that a court would. If the arbitrator finds either the substance of your claim or the relief sought in the demand is frivolous or brought for an improper purpose (as measured by the standards set forth in Federal Rule of Civil Procedure 11(b)), then the payment of all arbitration fees will be governed by the AAA Rules. In such a situation, you agree to reimburse LG for all monies previously disbursed by it that are otherwise your obligation to pay under the AAA Rules. Except as otherwise provided for, LG waives any rights it may have to seek attorneys’ fees and expenses from you if LG prevails in the arbitration.
Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration conducted solely on the basis of (1) documents submitted to the arbitrator, (2) through a telephonic hearing, or (3) by an in-person hearing as established by the AAA Rules. If your claim exceeds $25,000, the right to a hearing will be determined by the AAA Rules. Any in-person arbitration hearings will be held at a location within the federal judicial district in which you reside unless we both agree to another location or we agree to a telephonic arbitration.
Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by either: (i) sending an e-mail to [email protected], with the subject line: “Arbitration Opt Out” or (ii) calling 1-

us_main.book.book Page 39 Thursday, June 9, 2022 1:51 PM
LIMITED WARRANTY 39
800-980-2973. You must include in the opt out e-mail or provide by telephone: (a) your name and address; (b) the date on which the product was purchased; (c) the product model name or model number; and (d) the serial number (the serial number can be found (i) on the product; or (ii) online by accessing https:// www.lg.com/us/support/repair- service/schedule-repair-continued and clicking on “Find My Model & Serial Number”). You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure. Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any way, and you will continue to enjoy the full benefits of the Limited Warranty. If you keep this product and do not opt out, then you accept all terms and conditions of the arbitration provision described above.

ENGLISH

us_main.book.book Page 40 Thursday, June 9, 2022 1:51 PM

40 LIMITED WARRANTY

CANADA

TERMS AND CONDITIONS
ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS THE LAWS OF YOUR PROVINCE OR TERRITORY DO NOT PERMIT THAT, OR, IN OTHER JURISDICTIONS, IF YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.
Should your LG Washer (“Product”) fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG Electronics Canada, Inc. (“LGECI”) will, at its option, repair, replace or pro rate the Product upon receipt of proof of the original retail purchase. This limited warranty is valid only to the original retail purchaser of the Product and applies only to a Product distributed, purchased from an authorized retailer and used within Canada, as determined at the sole discretion of LGECI.

WARRANTY PERIOD (Note: If the original date of purchase cannot be verified, the warranty will begin sixty (60) days from the date of manufacture)

Washer

Stainless Steel Drum

Direct Drive Motor (Motor or Rotor)

One (1) year from the date of original retail purchase

Three (3) years from the date of original retail purchase

Ten (10) years from the date of original retail purchase

Parts and Labor (internal/ functional parts only)

Parts only (Consumer will be charged for labor)

Part only (Consumer will be charged for labor)

· Replacement products and parts are warranted for the remaining portion of the original warranty period or ninety (90) days, whichever is greater.
· Replacement products and parts may be new, reconditioned, refurbished, or otherwise factory remanufactured, all at the sole discretion of LGECI.
· Proof of original retail purchase specifying the Product model and date of purchase is required to obtain warranty service under this Limited Warranty.
LGECI’S SOLE LIABILITY IS LIMITED TO THE LIMITED WARRANTY SET OUT ABOVE. EXCEPT AS EXPRESSLY PROVIDED ABOVE, LGECI MAKES NO, AND HEREBY DISCLAIMS, ALL OTHER WARRANTIES AND CONDITIONS RESPECTING THE PRODUCT, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND NO REPRESENTATIONS SHALL BE BINDING ON LGECI. LGECI DOES NOT AUTHORIZE ANY PERSON TO CREATE OR ASSUME FOR IT ANY OTHER WARRANTY OBLIGATION OR LIABILITY IN CONNECTION WITH THE PRODUCT. TO THE EXTENT THAT ANY WARRANTY OR CONDITION IS IMPLIED BY LAW, IT IS LIMITED TO THE WARRANTY PERIOD SET OUT ABOVE. UNDER NO CIRCUMSTANCES SHALL LGECI, THE MANUFACTURER OR DISTRIBUTOR OF THE PRODUCT, BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, DIRECT, INDIRECT, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, WITHOUT LIMITATION, LOSS OF GOODWILL, LOST PROFITS, LOSS OF ANTICIPATED PROFITS, LOST REVENUE, LOSS OF USE, OR ANY OTHER DAMAGE, WHETHER ARISING DIRECTLY OR INDIRECTLY FROM ANY CONTRACTUAL BREACH, FUNDAMENTAL BREACH, TORT OR OTHERWISE, OR FROM ANY ACTS OR OMISSIONS. LGECI’S TOTAL LIABILITY, IF ANY, SHALL NOT EXCEED THE PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
This Limited Warranty gives you specific legal rights. You may also have other rights that vary from province to province depending on applicable provincial laws. Any term of this Limited Warranty that negates or varies any implied condition or warranty under provincial law is severable where it conflicts with such provincial law without affecting the remainder of this warranty’s terms.

ENGLISH

us_main.book.book Page 41 Thursday, June 9, 2022 1:51 PM
LIMITED WARRANTY 41
THIS LIMITED WARRANTY DOES NOT COVER:
· Service trips to i) deliver, pick up, or install or; educate on how to operate the Product; ii) correct wiring or plumbing; or iii) correct unauthorized repairs or installations of the Product;
· Damage or failure of the Product to perform during power failures and interrupted or inadequate electrical service;
· Damage or failure caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted water supply or inadequate supply of air;
· Damage or failure resulting from operating the Product in a corrosive atmosphere or contrary to the instructions outlined in the Product’s owner’s manual;
· Damage or failure to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, acts of God, or any other causes beyond the control of LGECI or the manufacturer;
· Damage or failure resulting from misuse, abuse, improper installation, repair, or maintenance of the Product. Improper repair includes use of parts not authorized or specified by LGECI. Improper installation or maintenance includes installation or maintenance contrary to the Product’s owner’s manual;
· Damage or failure caused by unauthorized modification or alteration of the Product, or if used for other than the intended household purpose/use of the Product, or damage or failure resulting from any water leakage due to improper installation of the Product;
· Damage or failure caused by incorrect electrical current, voltage or plumbing codes;
· Damage or failure caused by use that is other than normal household use, including, without limitation, commercial or industrial use, including use in commercial offices or recreational facilities, or as otherwise outlined in the Product’s owner’s manual;
· Damage or failure caused by the use of any accessories, components or cleaning products, including, without limitation, that are not approved/authorized by LGECI;
· Damage or failure caused by transportation and handling, including scratches, dents, chips and/or other damage to the finish of the Product, unless such damage results from defects in materials or workmanship and is reported to LGECI within one (1) week of delivery of the Products;
· Damage or missing items to any display, open box, refurbished or discounted Product;
· Refurbished Product or any Product sold “As Is”, “Where Is”, “With all Faults”, or any similar disclaimer;
· Products with original serial numbers that have been removed, altered or cannot be readily determined at the discretion of LGECI;
· Increases in utility costs and additional utility expenses in any way associated with the Product;
· Replacement of light bulbs, filters, fuses or any other consumable parts;
· Costs associated with removal and/or reinstallation of the Product for repairs;
· Noises associated with normal operation and failure to follow instructions found in the use and care and installation guides or operating the unit in an unsuitable environment will not be covered under this warranty.
· Coverage for “in Home” repairs, for products in-warranty, will be provided if the Product is within a 150 km radius from the nearest authorized service center (ASC), as determined by LG Canada. If your Product is located outside a 150 km radius from a ASC, as determined by LG Canada, it will be your responsibility to bring the Product, at your sole expense, to the ASC for in- warranty repair.
All costs and expenses associated with the above excluded circumstances, listed under the heading, This Limited Warranty Does Not Cover, shall be borne by the consumer.
TO OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION, PLEASE CALL OR VISIT OUR WEBSITE:
Call 1-888-542-2623 and select the appropriate option from the menu, or visit our website at http:// www.lg.com

us_main.book.book Page 42 Thursday, June 9, 2022 1:51 PM
42 LIMITED WARRANTY
PROCEDURE FOR RESOLVING DISPUTES:
EXCEPT WHERE PROHIBITED AT LAW, ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION. EXCEPT WHERE PROHIBITED AT LAW, YOU AND LG BOTH IRREVOCABLY AGREE TO WAIVE THE RIGHT TO A JURY TRIAL AND TO BRING OR PARTICIPATE IN A CLASS ACTION.
Definitions. For the purposes of this section, references to “LG” mean LG Electronics Canada, Inc., its parents, subsidiaries and affiliates, and each of their officers, directors, employees, agents, beneficiaries, predecessors in interest, successors, assigns and suppliers; references to “dispute” or “claim” shall include any dispute, claim or controversy of any kind whatsoever (whether based in contract, tort, statute, regulation, ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or relating in any way to the sale, condition or performance of the product or this Limited Warranty.
Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LGECI Legal Team at 20 Norelco Drive, North York, Ontario, Canada M9L 2X6 (the “Notice of Dispute”). You and LG agree to engage in good faith discussions in an attempt to amicably resolve your claim. The notice must provide your name, address, and telephone number; identify the product that is the subject of the claim; and describe the nature of the claim and the relief being sought. If you and LG are unable to resolve the dispute within 30 days of LG’s receipt of the Notice of Dispute, the dispute shall be resolved by binding arbitration in accordance with the procedure set out herein. You and LG both agree that, during the arbitration proceeding, the terms (including any amount) of any settlement offer made by either you or LG will not be disclosed to the arbitrator until the arbitrator determines the dispute.
Agreement to Binding Arbitration and Class Action Waiver. Upon failure to resolve the dispute during the 30 day period after LG’s receipt of the Notice of Dispute, you and LG agree to resolve any claims between you and LG only by binding arbitration on an individual basis, unless you opt out as provided below, or you reside in a jurisdiction that prevents full application of this clause in the circumstances of the claims at issue (in which case if you are a consumer, this clause will only apply if you expressly agree to the arbitration). To the extent permitted by applicable law, any dispute between you and LG shall not be combined or consolidated with a dispute involving any other person’s or entity’s product or claim. More specifically, without limitation of the foregoing, except to the extent such a prohibition is not permitted at law, any dispute between you and LG shall not under any circumstances proceed as part of a class or representative action. Instead of arbitration, either party may bring an individual action in small claims court, but that small claims court action may not be brought on a class or representative basis except to the extent this prohibition is not permitted at law in your province or territory of jurisdiction as it relates to the claims at issue between you and LG.
Arbitration Rules and Procedures. To begin arbitration of a claim, either you or LG must make a written demand for arbitration. The arbitration will be private and confidential, and conducted on a simplified and expedited basis before a single arbitrator chosen by the parties under the provincial or territorial commercial arbitration law and rules of the province or territory of your residence. You must also send a copy of your written demand to LG at LG Electronics, Canada, Inc., Attn: Legal Department- Arbitration, 20 Norelco Drive, North York, Ontario M9L 2X6. This arbitration provision is governed by your applicable provincial or territorial commercial arbitration legislation. Judgment may be entered on the arbitrator’s award in any court of competent jurisdiction. All issues are for the arbitrator to decide, except that, issues relating to the scope and enforceability of the arbitration provision and to the arbitrability of the dispute are for the court to decide. The arbitrator is bound by the terms of this provision.
Governing Law. The law of the province or territory of your purchase shall govern this Limited Warranty and any disputes between you and LG except to the extent that such law is preempted by or inconsistent with applicable federal or provincial/territorial law. Should arbitration not be permitted for any claim, action, dispute or controversy between you and LG, you and LG attorn to the exclusive jurisdiction of the courts of the province or territory of your purchase for the resolution of the claim, action, dispute or controversy between you and LG.
Fees/Costs. You do not need to pay any fee to begin an arbitration. Upon receipt of your written demand for arbitration, LG will promptly pay all arbitration filing fees unless you seek more than $25,000 in damages, in which case the payment of these fees will be governed by the applicable arbitration rules. Except as otherwise provided for herein, LG will pay all filing, administration and arbitrator fees for any arbitration initiated in accordance with the applicable arbitration rules and this arbitration provision. If you prevail in the arbitration, LG will pay your attorneys’ fees and expenses as long as they are reasonable, by

ENGLISH

us_main.book.book Page 43 Thursday, June 9, 2022 1:51 PM
LIMITED WARRANTY 43
considering factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the foregoing, if applicable law allows for an award of reasonable attorneys’ fees and expenses, an arbitrator can award them to the same extent that a court would. If the arbitrator finds either the substance of your claim or the relief sought in the demand is frivolous or brought for an improper purpose (as measured by the applicable laws), then the payment of all arbitration fees will be governed by the applicable arbitration rules. In such a situation, you agree to reimburse LG for all monies previously disbursed by it that are otherwise your obligation to pay under the applicable arbitration rules. Except as otherwise provided for, LG waives any rights it may have to seek attorneys’ fees and expenses from you if LG prevails in the arbitration.
Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration conducted solely (1) on the basis of documents submitted to the arbitrator, (2) through a telephonic hearing, or (3) by an in-person hearing as established by the applicable arbitration rules. If your claim exceeds $25,000, the right to a hearing will be determined by the applicable arbitration rules. Any inperson arbitration hearings will be held at the nearest, most mutually-convenient arbitration location available within the province or territory in which you reside unless you and LG both agree to another location or agree to a telephonic arbitration.
Severability and Waiver. If any portion of this Limited Warranty (including these arbitration procedures) is unenforceable, the remaining provisions will continue in full force and effect to the maximum extent permitted by applicable law. Should LG fail to enforce strict performance of any provision of this Limited Warranty (including these arbitration procedures), it does not mean that LG intends to waive or has waived any provision or part of this Limited Warranty.
Opt Out.You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by either (i) sending an e-mail to [email protected], with the subject line: “Arbitration Opt Out;” or (ii) calling 1800-980-2973. You must include in the opt out e-mail or provide by telephone: (a) your name and address; (b) the date on which the product was purchased; (c) the product model name or model number; and (d) the serial number (the serial number can be found (i) on the product; or (ii) online by accessing https:// www.lg.com/ca_en/support/repair- service/schedule- repair and clicking on “Find My Model & Serial Number”).
In the event that you “Opt Out”, the law of the province or territory of your residence shall govern this Limited Warranty and any disputes between you and LG except to the extent that such law is preempted by or inconsistent with applicable federal or provincial/territorial law. Should arbitration not be permitted for any claim, action, dispute or controversy between you and LG, you and LG agree to attorn to the exclusive jurisdiction of the courts of the province or territory of your residence for the resolution of the claim, action, dispute or controversy between you and LG.
You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure. Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any way, and you will continue to enjoy the full benefits of the Limited Warranty. If you keep this product and do not opt out, then you accept all terms and conditions of the arbitration provision described above.
Conflict of Terms. In the event of a conflict or inconsistency between the terms of this Limited Warranty and the End User License Agreement (“EULA”) in regards to dispute resolution, the terms of this Limited Warranty shall control and govern the rights and obligations of the parties and shall take precedence over the EULA.

us_main.book.book Page 44 Thursday, June 9, 2022 1:51 PM
44 Memo

ls_main.book.book Page 1 Thursday, June 9, 2022 2:18 PM
MANUAL DEL PROPIETARIO
LAVADORA
Lea el manual del propietario detenidamente previo a operar el electrodoméstico y mantengalo al alcance para futuras referencias. El manual del propietario completo se puede encontrar en el sitio web de LG en: http ://gscs-manual.lge.com/ Total/DFZ/NA/FL/FX/main.html o escaneando el código QR. LG trabaja para crear un futuro sustentable y publica partes de este manual únicamente en línea. ¡Las pequeñas acciones pueden tener enormes resultados!
ESPAÑOL WM6700H*A
www.lg.com
Copyright © 2022 LG Electronics Inc. Todos los derechos reservados

ls_main.book.book Page 2 Thursday, June 9, 2022 2:18 PM
2
ÍNDICE
3 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
3 LEA TODAS LAS INSTRUCCIONES ANTES DE UTILIZAR
3 MENSAJES DE ADVERTENCIA 7 MENSAJES DE PRECAUCIÓN
8 DESCRIPCIÓN GENERAL DEL PRODUCTO
8 Características del producto
10 INSTALACIÓN
10 Antes de la instalación 11 Elección de la ubicación adecuada 12 Desempaque y retiro del material de
transporte 13 Conexión de las mangueras de entrada de
agua 14 Conexión de la manguera de desagüe 16 Nivelación de la lavadora 17 Revisión final de la instalación
19 FUNCIONAMIENTO
19 Antes de utilizarlo 20 Carga de la lavadora 21 Agregado de productos de limpieza
24 FUNCIONES INTELIGENTES
24 Uso de la aplicación LG ThinQ 27 Función Smart DiagnosisTM (Diagnóstico
Inteligente)
28 MANTENIMIENTO
28 Limpieza regular 28 Mantenimiento periódico 32 Cuidado en climas fríos
35 SOLUCIÓN DE PROBLEMAS
35 Antes de llamar al servicio técnico
39 GARANTÍA LIMITADA
39 EE. UU.

ESPAÑOL

ls_main.book.book Page 3 Thursday, June 9, 2022 2:18 PM
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 3
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
LEA TODAS LAS INSTRUCCIONES ANTES DE UTILIZAR
Mensajes de seguridad
Su seguridad y la de los demás son muy importantes. Tanto en este manual como en el equipo, hemos proporcionado muchos mensajes de seguridad importantes. Siempre debe leer y respetar todos los mensajes de seguridad.
Este es el símbolo de alerta de seguridad. Este símbolo le advierte sobre posibles riesgos que pueden ocasionar lesiones o la muerte a usted o a otros. El símbolo de alerta de seguridad siempre estará acompañado de las palabras “ADVERTENCIA” o “PRECAUCIÓN” y seguido de un mensaje de seguridad importante. Estos términos significan lo siguiente:
ADVERTENCIA
El incumplimiento de las instrucciones podría causarle la muerte o lesiones graves.
PRECAUCIÓN
El incumplimiento de las instrucciones podría causarle lesiones o daños al producto. Todos los mensajes de seguridad le indicarán cuáles son los peligros potenciales, cómo reducir la posibilidad de lesiones y qué podría suceder si no sigue las instrucciones.
MENSAJES DE ADVERTENCIA
ADVERTENCIA
· Para disminuir el riesgo de explosiones, incendios, descargas eléctricas, quemaduras, lesiones o muerte para las personas que usen este artefacto, siga las precauciones básicas, incluidas las siguientes:
Instalación
· Cumpla con todos los procedimientos de seguridad del sector recomendados, incluido el uso de guantes de manga larga y gafas de seguridad.
· Nunca intente operar este artefacto si se encuentra dañado, si no funciona correctamente, si no está ensamblado por completo o si tiene piezas faltantes o rotas, incluido un cable o enchufe dañado.
· Antes de ser utilizado, este artefacto debe ser correctamente instalado, conforme a lo descrito en este manual.
· Para reducir el riesgo de lesiones graves o muerte, siga todas las instrucciones de instalación. · Consulte las INSTRUCCIONES DE INSTALACIÓN para obtener información detallada sobre los
procedimientos de conexión a tierra. Las instrucciones de instalación se suministran junto con el artefacto para ser consultadas por el instalador. Si el artefacto se traslada a una nueva ubicación, asegúrese de que lo revise y lo vuelva a instalar personal de servicio calificado. · El traslado o la instalación del artefacto requieren de dos o más personas. · No instale el artefacto en lugares húmedos. · Almacene e instale el artefacto donde no esté expuesto a temperaturas bajo cero ni a la intemperie. · Este artefacto no ha sido diseñado para ser usado en embarcaciones o instalaciones móviles, tales como casas rodantes, remolques o aeronaves.

ls_main.book.book Page 4 Thursday, June 9, 2022 2:18 PM
4 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
· Mantenga los materiales de empaque fuera del alcance de los niños. Los materiales de empaque pueden ser peligrosos para los niños. Corren riesgo de asfixia.
· Destruya el cartón, la bolsa de plástico y los demás materiales de empaque luego de Desempaque el artefacto. Estos materiales podrían utilizarlos los niños para jugar. Las cajas de cartón cubiertas con tapetes, colchas o láminas plásticas pueden convertirse en cámaras herméticas.
· El artefacto debe ser instalado y conectado a tierra por personal de servicio calificado, de acuerdo con los códigos locales.
· Cuando traslade o instale el aparato, tenga especial cuidado en no apretar, aplastar o dañar el cable de alimentación.
· Debe conectarse a un circuito de alimentación de clasificación y tamaño adecuados y debidamente protegido para evitar la sobrecarga eléctrica.
· Debe posicionar este artefacto cerca de una fuente de suministro eléctrico. · Desconecte el cable de alimentación, el fusible del hogar o el interruptor de corriente antes de instalar o
reparar el artefacto. · El cable de alimentación de este aparato está equipado con un enchufe de 3 clavijas (conexión a tierra)
que se conecta con un tomacorriente estándar de 3 clavijas (tierra) para minimizar la posibilidad de descarga eléctrica de este aparato. · Por ninguna razón debe cortar o quitar la tercera clavija (tierra) del cable de alimentación. · Use mangueras nuevas cuando conecte la lavadora al suministro de agua. No reutilice mangueras viejas.
FUNCIONAMIENTO
· Lea todas las instrucciones antes de usar el artefacto y consérvelas. · Use el artefacto únicamente para el fin previsto. · Si el producto ha estado sumergido en el agua, en agua estancada o en un área anegada, no entre en
contacto con el producto y comuníquese de inmediato con un Centro de Información al Cliente de LG Electronics para recibir instrucciones antes de reanudar el uso. · Si detecta un sonido extraño, olor a quemado o a químico, o humo provenientes del artefacto, desconéctelo de inmediato y contáctese con un Centro de Información al Cliente de LG Electronics. · Bajo ciertas condiciones, podría producirse gas hidrógeno en un sistema de agua caliente que no ha sido utilizado por dos semanas o más. EL GAS HIDRÓGENO ES EXPLOSIVO. Si el sistema de agua caliente no se ha usado durante ese período de tiempo, abra todas las llaves de agua caliente y deje que fluya varios minutos antes de usar el artefacto. Esto eliminará el gas hidrógeno acumulado. Dado que el gas hidrógeno es inflamable, no fume ni use ninguna llama abierta durante este proceso. · No introduzca las manos en la lavadora si la cuba, el tambor, el agitador o cualquier pieza interior del artefacto se encuentra en movimiento. Antes de cargar, descargar o agregar artículos, presione Inicio/ Pausa y espere que la cuba o el tambor se detengan por completo antes de introducir las manos en el interior. · Este artefacto no ha sido diseñado para ser utilizado por personas con capacidades físicas, sensoriales o mentales disminuidas (incluidos niños) o que no cuenten con la experiencia o los conocimientos necesarios para operarlo, salvo que una persona responsable de su seguridad les brinde la supervisión o la instrucción pertinente en cuanto al uso del artefacto. · No permita que niños o mascotas jueguen con el electrodoméstico, sobre o dentro de éste. Es necesaria la supervisión cuando el electrodoméstico es utilizado cerca de niños o mascotas. · Mantenga los productos de lavandería lejos del alcance de los niños. Para evitar lesiones a las personas, preste atención a todas las advertencias que figuran en las etiquetas de los productos. · Repare o reemplace de inmediato todos los cables de alimentación deshilachados o dañados de otra forma. No use un cable que exhiba roturas o abrasión en su longitud o en sus extremos. · Nunca desconecte el artefacto tirando del cable de alimentación. Sujete siempre con firmeza el enchufe y tire derecho para extraerlo del tomacorriente. · No use un cable de extensión ni un adaptador con este artefacto.

ESPAÑOL

ls_main.book.book Page 5 Thursday, June 9, 2022 2:18 PM
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 5
· No sujete el cable de alimentación ni toque los controles del artefacto con las manos húmedas. · No modifique ni extienda el cable de alimentación. · Si se daña el cable de electricidad, solo el fabricante está autorizado para reemplazarlo, o bien su agente
de servicio técnico o una persona de calificación similar para prevenir riesgos. · No coloque prendas aceitosas o grasosas, candelas o materiales inflamables encima del artefacto. · Mantenga el área debajo de los artefactos y sus alrededores libre de materiales combustibles (pelusa,
papel, trapos, etc.), gasolina, productos químicos y otros vapores o líquidos inflamables. · No almacene ni use gasolina u otros líquidos o vapores inflamables cerca de este artefacto ni de ningún
otro. · No mezcle cloro con amoniaco o ácidos, como por ejemplo, vinagre. Siga las instrucciones del envase
cuando utilice productos de lavandería. Su uso incorrecto puede producir gases venenosos, los cuales pueden ocasionar lesiones graves o la muerte. · Nunca utilice productos químicos agresivos, limpiadores abrasivos ni solventes para limpiar la lavadora. Estos productos arruinarán el acabado. · No lave prendas que hayan sido previamente limpiadas, lavadas o manchadas con gasolina, solventes de limpieza en seco, aceite vegetal o de cocina u otras sustancias inflamables o explosivas, ni prendas a las cuales se haya sumergido en estos productos, ya que los mismos emiten vapores que pueden inflamarse o explotar. · No agregue gasolina, solventes de limpieza en seco ni otras sustancias explosivas o inflamables al agua del lavado. Estas sustancias emiten vapores que pueden inflamarse o explotar. · En el caso de que se produzca una fuga de gas (gas propano, gas licuado de petróleo, etc.), no ponga en funcionamiento este artefacto ni ningún otro. Abra una puerta o una ventana para ventilar el área de inmediato. · No utilice indebidamente los controles. · Asegure la manguera de drenaje de forma segura en su lugar a manera de evitar inundaciones. · No maltrate la puerta, no se siente ni se pare sobre ella. · Verifique siempre el interior del electrodoméstico para detectar objetos extraños. · No permita que agua, blanqueador u otros líquidos permanezcan dentro del tambor durante largos períodos de tiempo. Esto podría corroer el tambor o provocar moho u olores. · No seque en el artefacto artículos que no estén lavados.
Mantenimiento
· No repare ni reemplace ninguna parte del electrodoméstico. Todas las reparaciones deben ser realizadas por personal de servicio calificado a menos que se recomiende específicamente en este manual del propietario. Utilice sólo piezas de fábrica autorizadas.
· Desconecte el artefacto del suministro eléctrico antes de limpiarlo o de realizar cualquier tipo de mantenimiento que pueda realizar el usuario. Colocar los controles en la posición de apagado no desconecta el artefacto del suministro eléctrico.
· Quite el polvo o los materiales extraños de las clavijas del enchufe de alimentación. · No desarme ni repare el artefacto por su cuenta. · Quite la puerta antes de sacar de servicio o desechar el artefacto para evitar el riesgo de que niños o
animales pequeños queden atrapados adentro. · Asegúrese de que la tapa o el cajón del dispensador se encuentren siempre cerrados cuando no se les
estén colocando productos de lavandería.
Instrucciones de conexión a tierra
· La conexión inadecuada del conductor de conexión a tierra puede resultar en riesgo de choque eléctrico. Pregunte a un electricista calificado o al personal de servicio si no está seguro si el artefacto está

ls_main.book.book Page 6 Thursday, June 9, 2022 2:18 PM
6 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
adecuadamente conectado a tierra. No modifique el enchufe que viene con el artefacto. Si no cabe en el contacto, pida que un electricista calificado instale un contacto apropiado. · El artefacto debe estar conectado a tierra. En caso de funcionamiento defectuoso o avería, la conexión a tierra reduce el riesgo de choque eléctrico al establecer una ruta de menor resistencia para la corriente eléctrica. El artefacto viene equipado con un cable eléctrico que tiene un conductor para conexión a tierra y un enchufe con conexión a tierra. El enchufe debe ser conectado a un contacto apropiado que esté instalado y conectado a tierra de acuerdo con todos los códigos y ordenanzas locales.

ESPAÑOL

ls_main.book.book Page 7 Thursday, June 9, 2022 2:18 PM
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 7
MENSAJES DE PRECAUCIÓN
PRECAUCIÓN
· Para reducir el riesgo de lesiones leves o moderadas a personas, el mal funcionamiento o daño al producto o propiedad cuando use este producto, siga las precauciones básicas, incluidas las siguientes:
Instalación
· Instale el producto sobre un piso firme y nivelado.
FUNCIONAMIENTO
· No coloque ningún objeto encima del artefacto. · Cierre las llaves de agua y desconecte el artefacto si este no será usado por un periodo de tiempo
prolongado, por ejemplo, durante las vacaciones. · SIEMPRE siga las instrucciones para cuidado de los tejidos suministradas por el fabricante. · Use suavizantes o productos para eliminar la electricidad estática solamente según las recomendaciones
del fabricante. · No combine productos de lavandería en una misma carga, a menos que este uso se especifique en la
etiqueta. · No toque el agua de desagüe, ya que podría estar caliente. · Si las mangueras de drenaje y de entrada de agua se congelan en invierno, descongélelas antes de
utilizar el electrodoméstico. · No almacene ni vierta limpiadores, blanqueadores (blanqueador con cloro, blanqueador oxigenado, etc.)
ni detergentes líquidos encima del artefacto. Si lo hace, podría ocasionar corrosión, decoloración o daño de la superficie del artefacto. · Las prendas o los artículos impermeables o resistentes al agua se deben lavar solo en el ciclo Waterproof (Impermeables), Bedding (Ropa de Cama), Bulky/Large (Voluminosas/Grandes) o Jumbo Wash (Lavado Jumbo). (Entre los ejemplos se incluyen prendas resistentes al agua, fundas para colchones, prendas para exteriores y tapetes de plástico). Si se utiliza otro ciclo, se pueden producir lesiones personales o daños a la lavadora, a las prendas, a las paredes, al piso y a los objetos circundantes, debido a la vibración anormal.
GUARDE ESTAS INSTRUCCIONES

ls_main.book.book Page 8 Thursday, June 9, 2022 2:18 PM

8 DESCRIPCIÓN GENERAL DEL PRODUCTO
DESCRIPCIÓN GENERAL DEL PRODUCTO
Características del producto
Las ilustraciones en esta guía pueden diferir de los componentes y accesorios reales, los cuales están sujetos a cambios sin previo aviso por parte del fabricante a fin de introducir mejoras en el producto.
ADVERTENCIA · Para su seguridad y para prolongar la vida útil del producto, use solo componentes autorizados. El
fabricante no se hace responsable del mal funcionamiento del producto, los daños a la propiedad o las lesiones corporales causadas por el uso de componentes, partes o productos no autorizados adquiridos por separado.

Vista frontal

Vista trasera

a Panel de control b Bandeja dispensadora de detergente
(ezDispense/dispensador manual) c Puerta d Filtro de la bomba de drenaje e Manguera de drenaje f Cubierta del filtro de la bomba de Drenaje g Patas de nivelación h Sello de la Puerta i Tambor

a Entradas de Agua b Tornillos de transporte c Cable de Alimentación d Manguera de drenaje

ESPAÑOL

ls_main.book.book Page 9 Thursday, June 9, 2022 2:18 PM

Accesorios
Accesorios incluidos
a Apoyos antideslizantes b Tapones de agujeros c Llave d Correa e Codo de soporte (para asegurar la manguera
de desagüe) Accesorios requeridos (se vende por separado)

DESCRIPCIÓN GENERAL DEL PRODUCTO 9

Especificaciones del producto

Modelo

WM6700H*A

Requisitos eléctricos

120 V~, 60 Hz

Presión de agua mín./ 20 psi – 120 psi (138 kPa

máx.

– 827 kPa)

Dimensiones (ancho X 27” X 39” X 33 1/4” (70 altura X profundidad) cm X 99 cm X 84 cm)

Profundidad máxima con la puerta abierta

55” (139.6 cm)

Peso neto

209.5 lb (95 kg)

Velocidad máx. de centrifugado

1300 RPM

a Mangueras de agua caliente y fría
Accesorios opcionales (se vende por separado)

a Pedestal
b Pedestal lavador
c Kit de Apilamiento
Verifique el ancho del pedestal antes de comprar para asegurarse de que coincida el ancho de su artefacto (27″ (70 cm) o 29″ (74 cm)).

ls_main.book.book Page 10 Thursday, June 9, 2022 2:18 PM
10 INSTALACIÓN
INSTALACIÓN
Antes de la instalación
Descripción general de la instalación
Lea las siguientes instrucciones de instalación inmediatamente después de adquirir esta lavadora o transportarla a otra ubicación.

a

b

c

e

f

a Elección de la ubicación adecuada b Desempaque y retiro del material de transporte c Conexión de las mangueras de ingreso d Conexión de la manguera de desagüe e Nivelación de la lavadora f Revisión final de la instalación

ADVERTENCIA
· El traslado o la instalación del artefacto requieren de dos o más personas. El incumplimiento de estas instrucciones podría causar lesiones.
· Almacene e instale el artefacto donde no esté expuesto a temperaturas bajo cero ni a la intemperie. El incumplimiento de esta advertencia puede causar daños al producto o las piezas, lesiones graves, incendios, descargas eléctricas o la muerte.
· Conecte la lavadora a tierra adecuadamente, de acuerdo con todos los códigos y las ordenanzas vigentes. El incumplimiento de esta advertencia puede causar lesiones graves, incendios, descargas eléctricas o la muerte.
· Para garantizar una circulación de aire adecuada, no bloquee la abertura grande que se encuentra en la parte inferior de la lavadora con tapetes u otros materiales.
· No retire la clavija de conexión a tierra del cable de alimentación. No utilice un adaptador ni un cable de extensión. Conecte a un tomacorriente de 3 clavijas con conexión a tierra. El incumplimiento de esta advertencia puede causar lesiones graves, incendios, descargas eléctricas o la muerte.

ls_main.book.book Page 11 Thursday, June 9, 2022 2:18 PM
INSTALACIÓN 11
· Ciertas piezas internas no tienen conexión a tierra en forma intencional y pueden presentar un riesgo de descarga eléctrica sólo durante la reparación. Personal de servicio: No toque la bomba, la válvula, el motor o el tablero de control cuando el aparato esté recibiendo energía.

ESPAÑOL

Herramientas necesarias
a Pinzas
b Destornillador de hoja plana
c Nivel
Elección de la ubicación adecuada
Revise los siguientes requisitos para la ubicación de instalación antes de instalar la lavadora. · Permita que quede espacio suficiente entre los
muros y la lavadora para su instalación. · Asegúrese de que el piso esté limpio, seco y libre
de polvo, suciedad, agua y aceite, para que las patas de nivelación no se deslicen fácilmente. Las patas de nivelación que se muevan o deslicen por el piso podrían contribuir a un exceso de vibración y ruido. · Si el piso es demasiado flexible, refuércelo para volverlo más rígido. Si el piso no es sólido, se podrían generar vibraciones y ruidos intensos. · Si es necesario utilizar un depósito de drenaje, tenga mucho cuidado de seguir las instrucciones que se proporcionan con este y asegúrese de que ajustar las patas niveladoras para que tengan un contacto firme y uniforme con el depósito. El uso de depósitos de drenaje y la falta de nivelación adecuada de la lavadora pueden aumentar la vibración y el ruido durante el funcionamiento.
Tomacorriente
· El tomacorriente debe estar ubicado dentro de un perímetro de 60 pulgadas (1.5 m) de cualquiera de los lados de la lavadora.
· Coloque la lavadora de manera que se pueda acceder fácilmente al tomacorriente y el enchufe.
· No sobrecargue el tomacorriente conectándole más de un artefacto.

· El tomacorriente debe estar conectado a tierra según las regulaciones y los códigos de cableado eléctrico vigentes.
· Utilice un interruptor de circuito o un fusible de acción retardada.
· Es responsabilidad y obligación personal del propietario de la lavadora contar con un tomacorriente adecuado que haya sido instalado por personal de servicio calificado.

Suelo
· Para minimizar ruidos y vibraciones, instale la lavadora en un piso sólidamente construido y a nivel, que pueda brindar soporte a la lavadora sin hundirse ni rebotar.
· La lavadora debe instalarse en un suelo firme para minimizar la vibración que se produce durante el centrifugado. Los pisos de concreto son los más indicados, pero un piso de madera es suficiente, siempre y cuando esté construido conforme a las normas de la FHA.
· El piso debajo de la lavadora no debe tener una pendiente de más de 1 pulgada (2.5 cm) de lado a lado o de adelante hacia atrás.
· No se recomienda su instalación en superficies cubiertas por alfombras o baldosas blandas.
· Nunca instale la lavadora sobre una plataforma ni sobre una estructura de soporte débil.

Instalación en el piso Para garantizar el espacio suficiente para las mangueras de entrada de agua y desagüe, y para la circulación de aire, deje un espacio de, al menos, 1 pulgada (2.5 cm) a cada lado y 4 pulgadas (10 cm) detrás de la lavadora. Asegúrese de tener en cuenta las molduras de pisos, puertas o muros que podrían aumentar los espacios necesarios.

A

G

C B

DE

F

E

Dimensiones y espacios

A

24 3/4” (62.6 cm)

ls_main.book.book Page 12 Thursday, June 9, 2022 2:18 PM

12 INSTALACIÓN

Dimensiones y espacios

B

55” (139.6 cm)

C

33 1/4” (84 cm)

D

4” (10 cm)

E

1” (2.5 cm)

F

27” (70 cm)

G

1/4” (0.5 cm)

Instalación Apilada o de Pedestal La lavadora puede apilarse debajo de un secador o sobre un pedestal o pedestal lavador.
F

E

A

BC

D

C

Dimensiones y espacios

A

33 1/4″ (84 cm)

B

4” (10 cm)

C

1” (2.5 cm)

D

27” (70 cm)

E

77 1/2” (196.8 cm)

F

1/4” (0.5 cm)

NOTA
· Consulte las instrucciones que se suministran junto con el kit de pedestal opcional antes de instalar el electrodoméstico sobre el pedestal.
· No utilice una bandeja de drenaje con una instalación de pedestal o pedestal lavadora, ya que ésta podría bloquear el cajón. Utilizar una bandeja de drenaje podría causar un incremento en el ruido y la vibración durante la operación.

Desempaque y retiro del material de transporte
Retire todo el material de transporte de la lavadora para su adecuada operación y verifique que no haya daños provocados durante el envío.
PRECAUCIÓN · No remover el material de transporte podría
causar ruido y vibración excesiva.
Desempaque del material de transporte
Algunos modelos se envían sin soporte del tambor. Levante la lavadora de la base de espuma. · Luego de quitar el cartón y el material de
transporte, levante la lavadora de la base de espuma. · Asegúrese de que el soporte plástico del tambor a salga junto con la base y que no quede atascado en la parte inferior de la lavadora. · Si debe recostar la lavadora para retirar la base de cartón b, siempre proteja sus lados y recuéstela con cuidado sobre un costado. No apoye la lavadora sobre su parte posterior o frontal.

• Retiro del material de transporte
  1 Retire los ensambles de pernos.
  · Comenzando por los dos pernos de transporte de la parte inferior c, use la llave incluida para aflojar por completo los 4 pernos de transporte haciéndolos girar a la izquierda.

ls_main.book.book Page 13 Thursday, June 9, 2022 2:18 PM

ESPAÑOL

· Retire los ensambles de pernos (pernos y retenedores) moviéndolos suavemente a medida que tira de ellos.
2 Instale los tapones para los orificios.
· Localice los cuatro tapones para orificios d incluidos en el paquete de accesorios o sujetos a la parte posterior de la lavadora. Instálelos en los orificios de los ensambles de pernos.
PRECAUCIÓN · Después de retirarlos, guarde los ensambles de
pernos para uso futuro. Para evitar el daño de los componentes internos, no transporte la lavadora sin volver a instalar los pernos de transporte. Si no se retiran los pernos de transporte y los retenedores, existe la posibilidad de que se produzcan ruidos y vibraciones intensas que podrían

References

• gscs-manual.lge.com/
• LG QR-code Manual
• LG Open Source
• LG Electronics & Home Appliances | Shop Now | LG USA
• Request Product Repair Service | LG USA Support
• LG Open Source
• Aide et soutien à la clientèle LG | LG CA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>