Wireless Earbuds Truefree A1 Bluetooth 5.0 Headphones Wireless Earphones-Complete Features/Instruction Manual
- June 5, 2024
- TRUEFREE
Table of Contents
Wireless Earbuds Truefree A1 Bluetooth 5.0 Headphones Wireless Earphones
Specifications
- BRAND : Truefree
- COLOR : Black
- CONNECTIVITY TECHNOLOGY : Wireless
- MODEL NAME : A1
- FORM FACTOR : In-Ear
- PRODUCT DIMENSIONS: 1.49 x 0.7 x 0.68 inches
- ITEM WEIGHT: 3.17 ounces
Introduction
Each earbud has two microphones. The one successfully captures human speech, while the other effectively cancel out undesirable noise. Together with ENC (Environmental Noise Cancellation) technology, which helps decrease ambient noise so you can enjoy clear calls even in noisy environments. With rich sound details, robust bass, smooth mids, and precisely carved treble, the built-in 14.2mm driver provides a great feast for the ears. Through easy tips, play/pause, adjust volume, skip songs, control phone calls, and use the voice assistant, the sensitive multi-function touch control gives you complete control over the earbuds and device attached. It has Adopted cutting-edge technology to ensure low latency in game mode and ensure that the sound and visuals are in sync so you never miss a triumph. The earbuds’ seamless connection allows you to switch between single and twin mode, allowing you to use one earbud alone or both together to fully immerse yourself in the music experience.
The Truefree A1 Bluetooth headphones use a low-power consumption processor to deliver dependably faultless music for up to 4.5 hours on a single charge, with the pocket-sized charging case extending that to 18 hours overall. A USB-C port is included for improved stability and compatibility. Each earbud is only 0.15 oz, and the entire set is only 3.53 oz. The gentle curve and compact form were created to make your experience even better. After rigorous ergonomic simulation tests, the Truefree A1 earphones promise your long-term music enjoyment without discomfort.
PAIRING
- The earbuds automatically pair to each other after being taken out from the charging case. The light on the main earbud flashes in white and red, and the second earbud stays in white.
- Activate Bluetooth on the device, and choose “TRUEFREE A1” on the Bluetooth list to pair.
RESET
(Try the following steps if you fail to build a connection between two earbuds, or between earbuds and device.)
- Clear the pairing record between the earbuds and all your devices.
- Place back both earbuds and make sure they are in charging status. Press and hold both FBs for 10 seconds until both indicators flash white twice.
WEARING
PRODUCT DIAGRAM
BUTTON CONTROL
Power On| Auto: Take out from charging case
Manually: Press and hold the MFB for 1.5s
---|---
Power Off| Auto: Place back into charging case
Manually: Press and hold the MFB for 10s
Play / Pause| Double tap the MFB
Volume –| Single tap the left MFB
Volume +| Single tap the right MFB
Previous Track| Press and hold left MFB for 1.5s
Next Track| Press and hold right MFB for 1.5s
Answer / Hang Up Phone
Call
| Double tap the MFB
Reject Phone Call| Press and hold the MFB for 1.5s
Switch Between Two Calls| Press and hold the MFB for 2s
Manually Enter Pairing
Mode
| Press and hold the MFB for 6s
Activate Voice Assistant| Triple tap the right MFB
Game Mode| Triple tap the left MFB
GAME MODE
TRUEFREE A1 adopts the latest technology to ensure low latency in game mode and make sure the sound sync with the image. Triple tap on the left MFB to activate the game mode with a voice prompt “Game Mode” and deactivate the mode with a prompt “Exit Game Mode”.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Frequently Asked Questions
-
What does the charging LED tell while charging the case?
The LED stays on while charging, and turns off after fully charged. -
What does the LED inside the charging case tell?
The LED flashes slowly while charging the case. Red light Less than 20%
Yellow light 20% – 69%
Greenlight 70%-99% Green light stays on 100% -
Why are the earbuds still connected to my phone after placing them back?
The charging case is out of battery. The case will not turn off the earbuds if the case battery is dead.
Please make sure the earbuds sit well in the charging case, and the charging contactors on both the earbuds and charging case are clean. If not, please try something like a microfiber cloth to clean the contactors. -
How can I connect my A1 Wireless earbuds to my phone?
Make sure your phone’s Bluetooth is turned on. When you open the charging case, they will switch on and enter pairing mode immediately. On the device to be paired with the earbuds, turn on the pairing function. Find and choose “AIHOOR A1” from the list of available devices. -
What is the procedure for turning on my A1 headphones?
Turn on the power: When you press and hold the button (1) on both the left and right earbuds for 3 seconds, the LED indicator (2) on one side will alternately blink in blue and red (this side defaults to the primary earphone), while the LED indication (2) on the other side will blink in blue and red (this side default to the sub earphone). -
How can I get Soundpeats TrueFree to work?
Remove the charging case from both earphones. At first, the two earphones will flash white. The left indicator then goes out, while the right indicator burns red and white. Activate your device’s Bluetooth and choose “SOUNDPEATS TrueFree R” from the Bluetooth list. -
What is the best way to connect my A1 headphones to my iPhone?
Press and hold the Bluetooth button for 2 seconds to enable pairing mode on your Beoplay A1. Your Beoplay A1 will begin to flash blue, indicating that it is ready to connect to your device. On your iOS device, enable Bluetooth search. Beoplay A1 should show up as a connection option. -
What is the procedure for turning off my life A1?
Place the earbuds in the charging case to turn them off. If no device is connected, the earphones will automatically turn off after 2 minutes. To switch the earbuds on manually, press and hold the multi-function button on each for 1 second, or until the LED indication becomes white. -
When SOUNDPEATS are charged, how do you know?
To begin charging, the LED indicators on the earphones become red. When the LED indicators turn white, the earbuds are fully charged and turn off after 1 minute. -
Is there a SOUNDPEATS app?
Users of Android phones can download and install the app through the major Android app stores (Google Play, VIVO Play, OPPO Play, App Store, Xiaomi Play, Huawei Play); iPhone users can search for “SOUNDPEATS” in the APP store.
https://m.media-amazon.com/images/I/B1szLJNmKsL.pdf