panaride Bicycle Pump with Pressure Gauge User Manual
- June 17, 2024
- panaride
Table of Contents
panaride Bicycle Pump with Pressure Gauge
Product Information
Specifications
- Product: Pump
- Components: Plastic platform, 6 screws, screwdriver, handle
- Valve Types: AV-Valve (for bicycle, scooter, and car tyres), FV-Valve (for bicycle tyres), Needle (for balls), Nozzle (for fitness balls and swimming accessories)
- Additional Component: Angled Adapter
Product Usage Instructions
Assembly
- The pump comes with a plastic platform, 6 screws, a screwdriver, and a handle.
- Using the screwdriver, attach the plastic platform to the bottom base of the pump using 6 screws.
- Slide the handle onto the upper rod of the pump. Lock the handle in place by pressing the button, and aligning the hole in the handle with the hole in the rod.
- The pump is now assembled and ready to use.
Inflating Bicycle, Scooter, and Car Tires with an AV-Valve
- Put the valve onto the nipple with the lever raised.
- Secure the valve by lowering the lever.
- Inflate to the desired pressure.
- Raise the lever, then remove the valve from the nipple.
Inflating Football, Basketball, Volleyball, and Other Balls
- Insert the needle into the upper hole.
- Secure the needle by pushing down the lever.
- Insert the needle into the ball’s valve.
- Inflate to the desired pressure.
- Remove the needle from the ball.
- Lift the lever and remove the needle from the valve hole.
Inflating Bicycle Tire with an FV-Valve
- Put the valve onto the nipple with the lever raised.
- Secure the valve by lowering the lever.
- Inflate to the desired pressure.
- Raise the lever, then remove the valve from the nipple.
Inflating Fitness Balls, Swimming Accessories, and Other Items
- Insert the nozzle into the upper hole.
- Secure the nozzle by pushing down the lever.
- Insert the nozzle into the item’s valve.
- Inflate to the desired pressure.
- Remove the nozzle from the item.
- Lift the lever and remove the nozzle from the valve hole.
Using Angled Adapter
- Screw the angled adapter onto the nipple.
- Remove the cap from the adapter.
- Put the valve onto the adapter with the lever raised.
- Secure the valve by lowering the lever.
- Inflate to the desired pressure.
- Raise the lever and remove the valve from the adapter.
- Unscrew the adapter from the nipple.
FAQ
What is the cap on the angled adapter used for?
The cap on the angled adapter serves two purposes:
- For unscrewing the valve core from the nipple for rapid tyre deflation.
- For screwing the valve core back into the nipple after releasing air or if the tube valve is leaking.
instruction
How to assemble
- The pump comes with a plastic platform, 6 screws, a screwdriver, and a handle;
- Using the screwdriver, attach the plastic platform to the bottom base of the pump using 6 screws;
- Slide the handle onto the upper rod of the pump. Lock the handle in place by pressing the button, and aligning the hole in the handle with the hole in the rod.
- The pump is now assembled and ready to use.
INSTALLATION INSTRUCTIONS
How to inflate bicycle, scooter, and car tyres with an AV-valve
- Put the valve onto the nipple with the lever raised;
- Secure the valve by lowering the lever;
- Inflate to the desired pressure;
- Raise the lever, then remove the valve from the nipple.
How to inflate a bicycle tyre with an FV-valve
- Put the valve onto the nipple with the lever raised;
- Secure the valve by lowering the lever;
- Inflate to the desired pressure;
- Raise the lever, then remove the valve from the nipple.
How to inflate football, basketball, volleyball, and other balls
- Insert the needle into the upper hole;
- Secure the needle by pushing down the lever;
- Insert the needle into the ball’s valve;
- Inflate to the desired pressure;
- Remove the needle from the ball;
- Lift the lever and remove the needle from the valve hole.
How to inflate fitness balls, swimming accessories, and other items:
- Insert the nozzle into the upper hole;
- Secure the nozzle by pushing down the lever;
- Insert the nozzle into the item’s valve;
- Inflate to the desired pressure;
- Remove the nozzle from the item;
- Lift the lever and remove the nozzle from the valve hole.
The angled adapter is used for situations where the main valve cannot be accessed easily or where the primary valve does not fit.
- Screw the angled adapter onto the nipple;
- Remove the cap from the adapter;
- Put the valve onto the adapter with the lever raised;
- Secure the valve by lowering the lever;
- Inflate to the desired pressure;
- Raise the lever and remove the valve from the adapter;
- Unscrew the adapter from the nipple.
What is the cap on the angled adapter used for
- For unscrewing the valve core from the nipple for rapid tyre deflation.
- For screwing the valve core back into the nipple after releasing air or if the tube valve is leaking.
Read User Manual Online (PDF format)
Loading......