QSC FG-901624-2D-A Network Audio Expanders Installation Guide
- August 15, 2024
- QSC
Table of Contents
QSC FG-901624-2D-A Network Audio Expanders
Product Specifications
- Net Weight: Approx. 1.78 kg [3.92 lbs]
- Parts Symmetrical: About Center Lines Unless Otherwise Noted
- Dimensions: Unless Otherwise Specified, in MM [IN]
Product Usage Instructions
Components Overview
The product includes the following components:
- Gooseneck Microphone
- Push-to-Talk Button
- TSC-70-G3 Security Screw Access Hole
- Ethernet Chord Access Hole
- USB-C Port (TSC-70-G3 to Page Station Connection)
- Ethernet Port
Installation
- Ensure all components are present and undamaged.
- For TSC-70-G3 installation, refer to the separate manual provided.
- Connect the USB-C port for the Page Station connection.
- Place the microphone in the desired location for optimal performance.
Operation
- Press the Push-to-Talk button to activate the microphone.
- Adjust the microphone position for clear audio reception.
- Use an Ethernet port for network connectivity if required.
FAQ
- Q: What should I do if the microphone is not picking up sound?
- A: Check the connection of the USB-C port and ensure the microphone is properly positioned towards the sound source.
- Q: Can I use this product without connecting to a Page Station?
- A: Yes, the microphone can still function without being connected to a Page Station, but certain features may be limited.
Installation Instructions
NOTES: UNLESS OTHERWISE SPECIFIED
- NET WEIGHT APPROX. 1.78 KG [3.92 LBS].
- PARTS ARE SYMMETRICAL ABOUT CENTER LINES UNLESS OTHERWISE NOTED.
- TSC-70-G3 (SHIPPED SEPARATELY) SHOWN INSTALLED.
THIS DOCUMENT CONTAINS CONFIDENTIAL OR PROPRIETARY INFORMATION THAT IS THE PROPERTY OF QSC, LLC, AND MAY NOT BE DISCLOSED, REPRODUCED, OR USED WITHOUT EXPRESS WRITTEN CONSENT FROM QSC, LLC. NO PORTION OF THIS DOCUMENT MAY BE REPRODUCED, REDISTRIBUTED, OR OTHERWISE DISCLOSED TO ANY THIRD PARTY WITHOUT QSC’S WRITTEN PERMISSION.
CAGE CODE
- 00PW4
- FORM
- QOS40169 B
UNLESS OTHERWISE, SPECIFIED DIMENSIONS ARE IN MM [IN]
- PROJECTION
TOLERANCES ARE : DECIMAL ANGLES
- X 3 ±1°
- XX±
DRAWN BY
- K.CASTRO
- MECH ENGINEER
- D.GREEN
TECH DIRECTOR
- L.MERCS
- MFG ENGINEER
- T.MORGAN
REV BY REV KC
- REV DATE 25-JUN-2024
CONTACT
- QSC, LLC
- 1675 MACARTHUR BLVD
- COSTA MESA, CA 92626 USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>