Kontrol Energy SSWD120412 Mini wireless Door sensor User Guide

Kontrol Energy SSWD120412 Mini wireless Door sensor User Guide

SSWD120412

1. Introduction

It is a mini wireless door sensor regarded as an important part of wireless alarm panel. It can realtime detect open/close of door/window and low battery status. With exquisite design, it will perfectly match up with your home decoration and integrate into installation environment. As it is a separation triggered door sensor, when the magnet part and main body are separate, it will send alarm signal to alarm panel and alarm panel will perform appropriate action.

2. Features

Adopt imported high sensitivity magnetic sensor, with stable and reliable performance.

Special magnet position design, assure its high induction property toward metal door/window.
With heartbeat codes mechanism, can monitor sensor’s failure.

Battery level monitoring, low battery report. Ultra-low power consumption and extra-long standby time, up to 3 years battery working life.

3. Installation

1. Instruction
Shown as below picture (stick with 3M foam tape)

2. LED Indicator
Led indicator flashes when alarm is triggered

4. Notice

1. Please replace the battery in time when receive the low battery report.
2. When installation, Please note the following situations to ensure it can work normally.

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the
  receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.”

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>