soundcore Select 3 Portable Speaker Instruction Manual

soundcore Select 3 Portable Speaker

Product Information

Specifications:

• DC Power Input: 5V 2A
• Battery Capacity: 2400mAh/7.3V
• Audio Output Power: 16W
• Speaker Driver: 1.5″ Full Range x2
• Charging Time: 5 Hours
• Play Time: Up to 20 Hours (varies by volume level and music content)
• Waterproof Level: IPX7
• Bluetooth Version: 5.0
• Bluetooth Range: 100m/328ft

Product Usage Instructions

Charging Your Speaker:

• Flashing Red: Low Battery
• Steady Red: Being Charged
• Steady White: Fully Charged

Powering On/Off:

• Power On: Press the Power Button or Press and Hold for 2 Seconds (Steady White indicates Power On)
• Power Off: Press and Hold for 2 Seconds (Light Off indicates Power Off)

Note:
The speaker will power off automatically after 20 minutes if no device is connected.

Using Your Speaker:

Bluetooth Mode:

1. Press the Bluetooth Button to enter Bluetooth pairing mode.
2. Select “soundcore Select 3” from the Bluetooth list to connect.

PartyCast Mode:

1. Wirelessly connect up to 100 soundcore speakers with PartyCast function for synchronized audio and light.
2. To enter PartyCast pairing mode, connect a soundcore speaker to your phone via Bluetooth, then press and hold the Bluetooth button on the speaker for 2 seconds.
3. Secondary speakers can be added by pressing and holding the Bluetooth button on each speaker for 2 seconds.

Button Controls:

• Power On: Press or Press and Hold for 2 Seconds
• Power Off: Press and Hold for 2 Seconds
• Play / Pause: Press
• Next Track: Press Twice
• Previous Track: Press Three Times
• Answer / End a Call: Press
• Reject a Call: Press and Hold for 2 Seconds
• Enter Bluetooth Pairing Mode: Press and Hold for 2 Seconds
• Enter / Exit PartyCast Pairing Mode: Press and Hold for 2 Seconds
• Volume Up / Down: Press
• Bass On/Off: Press

soundcore App:
Download the soundcore app to enhance your experience.

Reset:
To reset the speaker, press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds.

Frequently Asked Questions (FAQ):

• Q: How do I know when the speaker is fully charged?
  A: When the Power LED shows a steady white light, it indicates that the speaker is fully charged.

• Q: How can I reset the speaker if needed?
  A: To reset the speaker, press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds.

At a Glance

Charging Your Speaker

Use a certified USB-C cable and charger to prevent any damage.

| Flashing Red| Low Battery
---|---|---
| Steady Red| Being Charged
| Steady White| Fully Charged

Powering On/Off

| Press or Press and Hold for 2 Seconds|

Power On

---|---|---
| Steady White
| Press and Hold for 2 Seconds| ****

Power Off

****| Light Off

This speaker will power off automatically after 20 minutes if no device is connected.

Using Your Speaker

Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select “soundcore Select 3” from the Bluetooth list to connect.

| Press| Enter / Exit Bluetooth Pairing Mode
---|---|---
| Flashing Blue| Bluetooth Pairing
| Steady Blue| Bluetooth Connected

• To re-enter Bluetooth pairing mode, press the Bluetooth button once.
• This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
• Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.

PartyCast Mode
You can wirelessly connect up to 100 soundcore speakers equipped with the PartyCast function to synchronize audio and light.

1. Connect a soundcore speaker to your phone via Bluetooth.
2. Press and hold the Bluetooth button on the speaker for 2 seconds to enter PartyCast pairing mode. The speaker that’s currently connected to your phone becomes the primary speaker.
3. Press and hold the Bluetooth button on each soundcore speaker for 2 seconds to enter PartyCast pairing mode. They will become secondary speakers.

| Press and Hold for 2 Seconds| Enter / Exit PartyCast Pairing Mode
---|---|---
| Flashing White| PartyCast Pairing
| Flashing White (Primary Speaker)| PartyCast Connected
| Steady White (Secondary Speaker)

Double-press the Bluetooth button on a secondary speaker to make it the primary speaker.

Button Controls

| Press or Press and Hold for 2 Seconds| Power On
---|---|---
Press and Hold for 2 Seconds| Power Off
| Press| Play / Pause
Press Twice| Next Track
Press Three Times| Previous Track
Press| Answer / End a Call
Press and Hold for 2 Seconds| Reject a Call
| Press| Enter Bluetooth Pairing Mode
Press and Hold for 2 Seconds| Enter / Exit PartyCast Pairing Mode
| Press| Volume Up / Down
| Press| Bass On/Off

soundcore App

Download the soundcore app to enhance your experience.

• Product information: Check the product name and software version, or read the user manual.
• Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker to the app.
• Battery status: Indicates the remaining battery level of your speaker.
• Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
• EQ settings: There are various preset EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
  • soundcore Signature: Standard EQ mode optimized for well-balanced sound.
  • Voice: Voices stand out more clearly from other ambient sounds.
  • Balance: No enhancement for high-frequency and low-frequency sounds.
  • Xtra Bass: Enhance the low-frequency sound.
• Set Auto-power-off time: The speaker will automatically power off when time is up.
• Voice prompt: Mute or restore the voice prompt while powering on/off.

Reset
Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker.

Specifications

Specifications are subject to change without notice.

Hereby, Anker Innovations Limited declares that this device complies with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website: https://uk.soundcore.com/pages/psti-related.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>