CYSPO A113 Magnetic Wireless Charger User Manual
- June 3, 2024
- CYSPO
Table of Contents
CYSPO A113 Magnetic Wireless Charger
Preface
Dear users, thank you for purchasing CYSPO products.lIn order to further understand the product, please read this manual carefully before use. Wish you a pleasant experience.
Product Details
- Charging Pad
- Wireless Charging Pad
- Micro USB Power Port
Using instructions:
- Power in, then the charger enters the standby station;
- Put the device that supports wireless charging in the charging area to begin wireless charging.
Indicator light Description:
- When the power is switched on, the blue light, green light andcyan light will ficker once and then turn off and enter the standby state;
- When the wireless charging device is used for charging, the blue light will be on long:
- When the device is fully charged, the green light will be on long.
- The blue light flashes when the device is not aligned with the charging area, or when metal objects touch the charging area.
How to solve abnormal charging:
- Please confirm whether your mobile phone has a wireless charging function before use;
- Check whether the phone deviates from the wireless inductive charging area of the charger.
- Whether a non-metallic protective case is used for charging mobilephones, and the thickness of the protective case is recommended not to exceed 4mm;
- When metal objects touch the charging area, the charger will automatically identify and provide power-off protection.
- When the temperature of the charger is too high, it will automatically start the protection.
- Please unplug the power supply first and use it after the charger recovers the temperature.
Q & A:
- Why is there heating in the charging of wireless charging inductive products?
- A: During the charging process, there will be a certain loss of magnetoelectric conversion, which will be converted into heat, causing the mobile phone and charger to generate heat, which is a normal phenomenon.
Suggestions:
- When the device is fully charged, disconnect it from charging in time to avoid a long cycle of charging, which may lead to continuous heating of the device and charger
- It is recommended to stop running the background software when charging the phone.
Safety Notes
- Use indoor or under dry environment, avoid placing or using in the environment of high temperature, humidity, strong static electricity and strong magnetic field;
- For your safety, please do not use wet hand plug and unplug electrical appliances Avoid putting it in a place easily accessible to infants and children;
- Do not use the product if it is contaminated with water or dirt;
- Non-professional personnel are not allowed to open and repair without authorization.
Specifications
- Input: 9V 2A, 12V 2A
- Output: 15W Max
- Product size: D61*6.5mm
Package Contents
- Wireless Charging pad x 1
- User Manual x 1
- Warranty Card x1
FCC Warning Statement
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference and including interference that may cause undesired operation.
- this device must accept any interference received,
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separationdistance of at least 20 cm from all persons and must not be
co‐located for
operating in conjunction with any other antenna or transmitter.